• 제목/요약/키워드: IPS system

검색결과 270건 처리시간 0.021초

위치 측위 기술을 이용한 영상 추적 시스템 설계 (Design of Image Tracking System Using Location Determination Technology)

  • 김봉현
    • 디지털융복합연구
    • /
    • 제14권11호
    • /
    • pp.143-148
    • /
    • 2016
  • 정보산업사회에서 안전에 대한 욕구가 증가함에 따라 보안에 대한 관심도 증가하고 있다. 그러나, CCTV만으로는 현대사회의 안전 욕구를 충족하지 못하고 있는 실정이다. 따라서, 본 논문에서는 GPS와 Beacon으로 이루어진 IPS 시스템에 영상 정보를 활용한 처리 기술을 연동하여 기존의 RFID 태그 부착의 불편함과 식별 가능한 영역의 한정된 단점이 보완된 영상 추적 시스템을 설계하고자 한다. 이를 위해, 스마트 기기와 사물 인터넷 융합 시스템을 설계하고 출입 통제의 정확성과 IPS의 신뢰성을 확보한 시스템을 연구하였다. 최종적으로, 지능형 PTZ 카메라를 이용한 영상 정보를 활용하고 출입자의 관리 정책을 설정하여 출입 통제 및 상황 제어를 수행하였다. 또한, 영상 추적 시스템, 인증 서버, 시각화 시스템을 통합 설계하여 출입자 행동 패턴을 분석하는 효율적인 IPS를 구축하는 기술을 설계하였다.

무기체계의 안전 설계를 위한 DFMEA 적용에 관한 연구 (A Study on the Application of DFMEA for Safety Design of Weapon System)

  • 서양우;오영일;김희욱;김소정
    • 시스템엔지니어링학술지
    • /
    • 제18권1호
    • /
    • pp.46-57
    • /
    • 2022
  • In this paper, we proposed the DFMEA Implementation Method for safety design of Weapon System. First, we presented the process for DFMEA. And then, the case analysis of OOO missile was performed in accordance with the process presented. After defining the system requirements of OOO missile, failure definition scoring criteria was set. In order to clarify the definition of failure, the failure was classified into safety, reliability, maintainability and others. After performing the function analysis, the relationship matrix analysis was performed to identify the failure mode according to the function without omission. After clarifying the failure classification, mode of failure, cause of failure and effect were analyzed to calculate the severity, occurrence and detection values. After the action priority was judged, the recommended action according to the failure classification was identified for the determined action priority. The results of this study can be used as a relevant basis for the design reflection and resource re-allocation of stakeholders.

핵연료 시험용 노내조사시험설비의 설계 현황 (The Design Status of the Irradiation Facility for Fuel Test)

  • 박국남;심봉식;안성호;유성연
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2007년도 동계학술발표대회 논문집
    • /
    • pp.310-315
    • /
    • 2007
  • The FTL has been developed to be able to irradiate test fuels at the irradiation hole(IR1 hole) by considering its utility and user's irradiation requirements. FTL consists of In-Pile Test Section (IPS) and Out-of-Pile System (OPS). Test condition in IPS such as pressure, temperature and the water quality, can be controlled by OPS. For safety assurance IPS is designed to have dual stainless steel pressure vessel and OPS is composed of main cooling water system, emergency cooling water system, LMP(letdown, make-up, purification) system, etc. FTL Conceptual design was set up in 2001, basic design had completed including a design requirement, basic piping & instrument diagram (P&ID), and the detail design in 2004. In 2005, the development team carried out purchase and manufacture hardware and make a contract for construction work. FTL construction work began on August, 2006 and ended on March, 2007. After FTL development which is expected to be finished by 2008, FTL will be used for the irradiation test of the new PWR-type fuel and can maximize the usage of HANARO.

  • PDF

Solar Wind Observations Using STELab-IPS Array In Japan

  • Fujiki, Ken'ichi;Tokumaru, Munetoshi;Iju, Tomoya;Hirota, Maria;Noda, Momotaro;Kojima, Masayoshi
    • 천문학회보
    • /
    • 제36권2호
    • /
    • pp.93.1-93.1
    • /
    • 2011
  • Radio wave from a compact radio source such as a quasar are scattered by irregularities of electron density. The scattered waves interfere with each other as they propagate to the Earth producing diffraction patterns on the ground. This phenomenon is called interplanetary scintillation (IPS). The IPS pattern contains the information of solar wind velocities and density fluctuations passing across a line-of-sight (LOS) from an observer to a radio source. The IPS is a useful tool which allows us to measure the solar wind in three dimensional space inaccessible to in situ observations. Although the IPS measurement is an integral of solar wind velocities and density fluctuations along the LOS, which causes degradation of accuracy, we have succeeded to develop computer assisted tomography (CAT) analysis to remove the effect of LOS integration. These techniques greatly improved the accuracy of determinations of solar wind velocity structures. In this talk we present our IPS observation system and long-term variation of global solar wind structures from 1980-2009, then we focus on recent peculiar solar wind properties.

  • PDF

PR Focus-뜨는 침입방지시스템(IPS) 시장

  • 벤처기업협회
    • 벤처다이제스트
    • /
    • 통권54호
    • /
    • pp.9-9
    • /
    • 2004
  • 네트워크 보안업계가 최근 IPS(Intrusion Prevention System) 제품 출시와 개발에 열을 올리고 있는 가운데 경쟁력을 좌우하는 관건으로 기가비트 데이터 처리 속도가 떠오르고 있다. IPS는 네트워크 초입에 설치돼 실시간으로 유해 트래픽을 분석 차단해주는 능동형 보안제품. IPS는 방화벽처럼 네트워크 처리속도가 확보되지 않으면 전체 네트워크가 마비되는 인라인(IN LINE) 방식으로 설치되기 때문에 기가비트 처리 속도가 필수적으로 요구된다. 기가비트 처리 속도가 적어도 2Gbps급은 되어야 한다는 것. 이에 따라 보안업계에 기가비트급 IPS 출시와 개발이 붐을 이루고 있다.

  • PDF

지능형 IPS 프레임워크 (An Intelligent IPS Framework)

  • 이동민;김광백;박충식;김성수;한승철
    • 한국지능정보시스템학회:학술대회논문집
    • /
    • 한국지능정보시스템학회 2007년도 추계학술대회
    • /
    • pp.514-519
    • /
    • 2007
  • 컴퓨터 네트워크 모니터링에 의한 보안장비는 많은 트래픽 자료를 분석하여, 이상유무를 판단하고, 대응해야 한다. 기존의 보안장비들은 이미 알려진 패턴에 대한 규칙을 이용하는 오용탐지방법(misuse detection)과 의미를 파악하기 어려운 많은 자료들을 제시하고 있는데 머물고 있다. 보다 나은 보안을 위해서는 정상적인 동작에서 벗어나는 이상징후를 탐지하여 침입을 탐지하는 이상탐지방법(anomaly detection)의 채용이 필요하고, 보안장비에서 제시되는 많은 트래픽 자료들은 보안전문가의 전문적인 분석이 필요하다. 본 연구에서는 데이터마이닝 기법을 이용한 이상탐지방법과 보안전문가의 전문적인 보안지식에 의한 분석, 대응, 관리를 위한 지식처리 기법을 사용할 수 있는 지능형 IPS(intrusion Detection System) 프레임워크를 제안한다.

  • PDF

채널 상태 정보를 이용한 딥 러닝 기반 실내 위치 확인 시스템 (Deep Learning-based Indoor Positioning System Using CSI)

  • 장중봉;최승원
    • 디지털산업정보학회논문지
    • /
    • 제16권4호
    • /
    • pp.1-7
    • /
    • 2020
  • Over the past few years, Wi-Fi signal based indoor positioning system (IPS) has been researched extensively because of its low expenses of infrastructure deployment. There are two major aspects of location-related information contained in Wi-Fi signals. One is channel state information (CSI), and one is received signal strength indicator (RSSI). Compared to the RSSI, the CSI has been widely utilized because it is able to reveal fine-grained information related to locations. However, the conventional IPS that employs a single access point (AP) does not exhibit decent performance especially in the environment of non-line-of-sight (NLOS) situations due to the reliability degeneration of signals caused by multipath fading effect. In order to address this problem, in this paper, we propose a novel method that utilizes multiple APs instead of a single AP to enhance the robustness of the IPS. In our proposed method, a hybrid neural network is applied to the CSIs collected from multiple APs. By relying more on the fingerprint constructed by the CSI collected from an AP that is less affected by the NLOS, we find that the performance of the IPS is significantly improved.

리눅스 환경에서의 침입방지시스템(IPS) 설계 (Design of Intrustion Prevention System(IPS) in Linux Environment)

  • 이상훈;김우년;이도훈;박응기
    • 융합보안논문지
    • /
    • 제4권2호
    • /
    • pp.1-7
    • /
    • 2004
  • 정보통신망의 빠른 발달과 이로 인한 인터넷 사용의 급증으로 인하여 해킹, 바이러스 등의 정보통신 역기능 또한 빠르게 발전하고 있다 이를 방지하기 위해 F/W, IDS, VPN 등의 보안 제품이 많이 사용되고 있다. 그러나, 1.25 인터넷 대란에서 알 수 있듯이 현 상황은 관리자가 보안 제품들에서 발생하는 경고 메시지를 확인하고 해당 내용을 대응할 수 없을 정도로 빠른 시간에 확산된다. 따라서, IDS와 더불어 자동 대응 기능을 갖추고 있는 침입방지시스템(IPS)이 절실히 요구되어지고 있고, 널리 사용되어지고 있다. 본 논문에서는 linux 운영 체제 환경에서의 공개된 도구인 snort와 iptables를 이용하여 시스템 구축 비용이 최소화될 수 있는 방향으로 설계되었다. 또한, snort에서 발생시킨 경보 메시지를 iptables와 연계하여 자동 대응을 수행하도록 구성되었으며, 이를 통하여 관리자 개입을 최소화하고 해킹사고에 대한 피해를 최소화 할 수 있도록 제안되었다.

  • PDF

반복 사용된 IPS Empress 2의 표면경도와 pressing accuracy에 관한 연구 (SURFACE HARDNESS AND PRESSING ACCURACY OF REUSED IPS EMPRESS 2)

  • 손외수;김유리;이경자;진태호
    • 대한치과보철학회지
    • /
    • 제41권5호
    • /
    • pp.596-605
    • /
    • 2003
  • Statement of problem : IPS Empress2 system was developed and used in prosthodontic treatment, but the cost of ingot is expensive for wide application. Purpose : This study was to investigate the possibility on recycling of IPS Empress 2 ceramic for wide application of IPS Empress 2 ceramic in prosthodontic treatment. Material and Method : 1st, 2nd and 3rd pressed disc-shaped($10{\times}1.5mm$) IPS Empress 2 specimens were made with IPS Empress ingot(200, Ivoclar, Liechtenstein) and pressing furnace(IPS Empress EP 500, Ivoclar, Liechtenstein). Vicker's surface hardness and fracture toughness, acid resistance, and pressing accuracy of IPS Empress 2 ceramic were measured and analyzed. Surface hardness was measured by microhardness tester(MTX 70. Matsuzawa, Japan), before and after surface treatment with 0.5% hydrofluoric acid and carbonic acid(Coca cola) for evaluation of acid resistance. Results : The surface hardness of 1st pressed specimen was the higher(5.11 GPa) than those of 2nd pressed(4.89 GPa) and 3rd pressed specimen(4.86 GPa), and the fracture toughness of 1st pressed ($1.58MPam^{1/2}$) and 2nd pressed specimen($1.51MPam^{1/2}$) were higher than that of 3rd pressed specimen($1.39MPam^{1/2}$). The changes of surface hardness of 1st, 2nd, and 3rd pressed specimens after treatment with fluoric acid were 0.17, 0.06, 0.05 (GPa) respectively, and those of 1st, 2nd, and 3rd pressed specimens after treatment with carbonic acid were 0.07, 0.00, 0.05(MPa) respectively. The pressing accuracy of 1st,2nd and 3rd specimen were 77.22%, 85.681%, and 75.05%. The pressing accuracy of 2nd pressed specimen was higher than that of the 3rd specimen. Conclusion : The changes of physical properties according to recycling of IPS Empress 2 from this study were insignificant. Therefore the possibility of recycling of IPS Empress 2 can be suggested from the results.

시뮬레이션을 이용한 통합전력시스템의 위험도 분석 (Simulation-Based Risk Analysis of Integrated Power System)

  • 이지영;한영진;윤원영;빈재구
    • 대한산업공학회지
    • /
    • 제42권2호
    • /
    • pp.151-164
    • /
    • 2016
  • In this paper, we deal with a risk analysis for an IPS (Integrated power system) and propose a simulation model combining the fault tree and event tree in order to estimate the system availability and risk level, together. Firstly, the basic information such as operational scenarios, physical structure, safety systems is explained in order to make the fault tree and event tree of the IPS. Next, we propose a discrete-event simulation model using a next-event time advance technique to advance the simulation time. Also the state transition and activity diagrams are explained to represent the relationship between the objects. By numerical examples, the redundancy allocation is considered in order to decrease the risk level of the IPS.