• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.143-148
• /
• 2016

There is increasing concern about security as a need for increased safety in the information industry society. However, it does not meet the needs for safety including CCTV. Therefore, in this paper, we link the processing technology using the image information to the IPS system consisting of GPS and Beacon. It designed a conventional RFID tag attached discomfort and image tracking system is limited to complement the disadvantages identifiable area. To this end, we designed a smart device and the Internet of Things convergence system and a research to ensure the accuracy and reliability of the IPS of the access control system. Finally, by leveraging intelligent video information using a PTZ camera, and set the entrant management policies it was carried out to control the situation and control. Also, by designing the integrated video tracking system, an authentication server, visualization systems were designed to establish an efficient technique for analyzing the IPS entrant behavior patterns.

• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.1
• /
• pp.46-57
• /
• 2022

In this paper, we proposed the DFMEA Implementation Method for safety design of Weapon System. First, we presented the process for DFMEA. And then, the case analysis of OOO missile was performed in accordance with the process presented. After defining the system requirements of OOO missile, failure definition scoring criteria was set. In order to clarify the definition of failure, the failure was classified into safety, reliability, maintainability and others. After performing the function analysis, the relationship matrix analysis was performed to identify the failure mode according to the function without omission. After clarifying the failure classification, mode of failure, cause of failure and effect were analyzed to calculate the severity, occurrence and detection values. After the action priority was judged, the recommended action according to the failure classification was identified for the determined action priority. The results of this study can be used as a relevant basis for the design reflection and resource re-allocation of stakeholders.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.310-315
• /
• 2007

The FTL has been developed to be able to irradiate test fuels at the irradiation hole(IR1 hole) by considering its utility and user's irradiation requirements. FTL consists of In-Pile Test Section (IPS) and Out-of-Pile System (OPS). Test condition in IPS such as pressure, temperature and the water quality, can be controlled by OPS. For safety assurance IPS is designed to have dual stainless steel pressure vessel and OPS is composed of main cooling water system, emergency cooling water system, LMP(letdown, make-up, purification) system, etc. FTL Conceptual design was set up in 2001, basic design had completed including a design requirement, basic piping & instrument diagram (P&ID), and the detail design in 2004. In 2005, the development team carried out purchase and manufacture hardware and make a contract for construction work. FTL construction work began on August, 2006 and ended on March, 2007. After FTL development which is expected to be finished by 2008, FTL will be used for the irradiation test of the new PWR-type fuel and can maximize the usage of HANARO.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.93.1-93.1
• /
• 2011

Radio wave from a compact radio source such as a quasar are scattered by irregularities of electron density. The scattered waves interfere with each other as they propagate to the Earth producing diffraction patterns on the ground. This phenomenon is called interplanetary scintillation (IPS). The IPS pattern contains the information of solar wind velocities and density fluctuations passing across a line-of-sight (LOS) from an observer to a radio source. The IPS is a useful tool which allows us to measure the solar wind in three dimensional space inaccessible to in situ observations. Although the IPS measurement is an integral of solar wind velocities and density fluctuations along the LOS, which causes degradation of accuracy, we have succeeded to develop computer assisted tomography (CAT) analysis to remove the effect of LOS integration. These techniques greatly improved the accuracy of determinations of solar wind velocity structures. In this talk we present our IPS observation system and long-term variation of global solar wind structures from 1980-2009, then we focus on recent peculiar solar wind properties.

• Venture DIGEST
• /
• s.54
• /
• pp.9-9
• /
• 2004

네트워크 보안업계가 최근 IPS(Intrusion Prevention System) 제품 출시와 개발에 열을 올리고 있는 가운데 경쟁력을 좌우하는 관건으로 기가비트 데이터 처리 속도가 떠오르고 있다. IPS는 네트워크 초입에 설치돼 실시간으로 유해 트래픽을 분석 차단해주는 능동형 보안제품. IPS는 방화벽처럼 네트워크 처리속도가 확보되지 않으면 전체 네트워크가 마비되는 인라인(IN LINE) 방식으로 설치되기 때문에 기가비트 처리 속도가 필수적으로 요구된다. 기가비트 처리 속도가 적어도 2Gbps급은 되어야 한다는 것. 이에 따라 보안업계에 기가비트급 IPS 출시와 개발이 붐을 이루고 있다.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.514-519
• /
• 2007

컴퓨터 네트워크 모니터링에 의한 보안장비는 많은 트래픽 자료를 분석하여, 이상유무를 판단하고, 대응해야 한다. 기존의 보안장비들은 이미 알려진 패턴에 대한 규칙을 이용하는 오용탐지방법(misuse detection)과 의미를 파악하기 어려운 많은 자료들을 제시하고 있는데 머물고 있다. 보다 나은 보안을 위해서는 정상적인 동작에서 벗어나는 이상징후를 탐지하여 침입을 탐지하는 이상탐지방법(anomaly detection)의 채용이 필요하고, 보안장비에서 제시되는 많은 트래픽 자료들은 보안전문가의 전문적인 분석이 필요하다. 본 연구에서는 데이터마이닝 기법을 이용한 이상탐지방법과 보안전문가의 전문적인 보안지식에 의한 분석, 대응, 관리를 위한 지식처리 기법을 사용할 수 있는 지능형 IPS(intrusion Detection System) 프레임워크를 제안한다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.4
• /
• pp.1-7
• /
• 2020

Over the past few years, Wi-Fi signal based indoor positioning system (IPS) has been researched extensively because of its low expenses of infrastructure deployment. There are two major aspects of location-related information contained in Wi-Fi signals. One is channel state information (CSI), and one is received signal strength indicator (RSSI). Compared to the RSSI, the CSI has been widely utilized because it is able to reveal fine-grained information related to locations. However, the conventional IPS that employs a single access point (AP) does not exhibit decent performance especially in the environment of non-line-of-sight (NLOS) situations due to the reliability degeneration of signals caused by multipath fading effect. In order to address this problem, in this paper, we propose a novel method that utilizes multiple APs instead of a single AP to enhance the robustness of the IPS. In our proposed method, a hybrid neural network is applied to the CSIs collected from multiple APs. By relying more on the fingerprint constructed by the CSI collected from an AP that is less affected by the NLOS, we find that the performance of the IPS is significantly improved.

• Convergence Security Journal
• /
• v.4 no.2
• /
• pp.1-7
• /
• 2004

The growth of incidents on the Internet has reflected growth of the internet itself and growth of the computing Power. while in Previous years, external attacks tended to originate from those interested trend in exploring the Internet for its own sake and testing their skills, there is an increasing trend towards intrusions motivated by financial, Political, and military objectives. so, attacks on the nation's computer infrastructures are becoming an increasingly serious problem. Even though the problem is ubiquitious, government agencies are particularly appealing targets and they tend to be more willing to reveal such events than commercial organizations. The threat of damage made necessity of security's recognition, as a result, many researches have been carried out into security of system actively. Intrusion Detection technology is detection of intrusion using audit data differently from using traditional simple filtering and informs manager of it. It has security manager of system deal with the intrusion more quickly. but, cause current environment of Internet manager can't doing response Intrusion alert immediately That's why IPS needed. IPS can response automatically the intrusion alert. so, manager is more comfortable and can response quickly.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.5
• /
• pp.596-605
• /
• 2003

Statement of problem : IPS Empress2 system was developed and used in prosthodontic treatment, but the cost of ingot is expensive for wide application. Purpose : This study was to investigate the possibility on recycling of IPS Empress 2 ceramic for wide application of IPS Empress 2 ceramic in prosthodontic treatment. Material and Method : 1st, 2nd and 3rd pressed disc-shaped($10{\times}1.5mm$) IPS Empress 2 specimens were made with IPS Empress ingot(200, Ivoclar, Liechtenstein) and pressing furnace(IPS Empress EP 500, Ivoclar, Liechtenstein). Vicker's surface hardness and fracture toughness, acid resistance, and pressing accuracy of IPS Empress 2 ceramic were measured and analyzed. Surface hardness was measured by microhardness tester(MTX 70. Matsuzawa, Japan), before and after surface treatment with 0.5% hydrofluoric acid and carbonic acid(Coca cola) for evaluation of acid resistance. Results : The surface hardness of 1st pressed specimen was the higher(5.11 GPa) than those of 2nd pressed(4.89 GPa) and 3rd pressed specimen(4.86 GPa), and the fracture toughness of 1st pressed ($1.58MPam^{1/2}$) and 2nd pressed specimen($1.51MPam^{1/2}$) were higher than that of 3rd pressed specimen($1.39MPam^{1/2}$). The changes of surface hardness of 1st, 2nd, and 3rd pressed specimens after treatment with fluoric acid were 0.17, 0.06, 0.05 (GPa) respectively, and those of 1st, 2nd, and 3rd pressed specimens after treatment with carbonic acid were 0.07, 0.00, 0.05(MPa) respectively. The pressing accuracy of 1st,2nd and 3rd specimen were 77.22%, 85.681%, and 75.05%. The pressing accuracy of 2nd pressed specimen was higher than that of the 3rd specimen. Conclusion : The changes of physical properties according to recycling of IPS Empress 2 from this study were insignificant. Therefore the possibility of recycling of IPS Empress 2 can be suggested from the results.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.2
• /
• pp.151-164
• /
• 2016

In this paper, we deal with a risk analysis for an IPS (Integrated power system) and propose a simulation model combining the fault tree and event tree in order to estimate the system availability and risk level, together. Firstly, the basic information such as operational scenarios, physical structure, safety systems is explained in order to make the fault tree and event tree of the IPS. Next, we propose a discrete-event simulation model using a next-event time advance technique to advance the simulation time. Also the state transition and activity diagrams are explained to represent the relationship between the objects. By numerical examples, the redundancy allocation is considered in order to decrease the risk level of the IPS.