• Korean Journal of Applied Biomechanics
• /
• v.24 no.2
• /
• pp.121-129
• /
• 2014

The purpose of this study was to investigate the effect of the toe headings on the biomechanics of knee joint in drop landing in an attempt to find the potential risk of non-contact anterior cruciate ligament (ACL) injury. Seventeen male college students ($20.5{\pm}1.1$ yrs; $175.2{\pm}6.4$ cm; $68.8{\pm}5.8$ kg), having no neuromuscular injury within an year, participated in this study. Three different toe headings such as toe-in (TI), neutral (N), and toe-out (TO) positions were tested. Motion capturing system consisting of eight high speed cameras and two force platforms were used to collect three-dimensional motion data and ground reaction force data during landing. Results indicated joint angles and peak joint moments were significantly affected by the toe headings. TI position produced larger valgus angle due to reduce knee distance in addition to higher flexion and valgus moment than other positions, which was somewhat vulnerable to the potential risk of non-contact ACL injury. TO position caused the largest internal rotation angle with smaller joint moments. Therefore, it is recommended that athletes need to land on the ground with neutral toe-heading position as possible in order to minimize the potential risk of non-contact ACL injury.

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.302-307
• /
• 2015

The use of turbocharger in internal combustion engines has increased as it is a key components for improving system efficiency without increasing engine size. Because of increasing demand, many studies have evaluated rotordynamic performance so as to increase rotation speed. This paper presents a linear and nonlinear analysis model for a turbocharger rotor supported by a floating ring bearing. We constructed rotor model by using the finite element method and approximated bearings as being infinitely short. In the linear model, we considered fluid film force as stiffness and damping element. In nonlinear analysis, calculation of the fluid film force involved solving the time dependent Reynolds equation. We verified the developed model by comparing the results to those of previous research. The analysis results show that there are four unstable modes, which are rigid body modes combining ring and rotor motion. As the rotating speed increases, the logarithmic decrement shows that certain unstable modes goes into the stable area or the stable mode goes into the unstable area. These unstable modes appear as sub-synchronous vibrations in nonlinear analysis. In nonlinear analysis frequency jump phenomenon demonstrated in several experimental studies appears. The analysis results also showed that frequency jump phenomenon occurs when the vibration mode changes and the sequence of unstable mode matches the linear analysis result. However, the natural frequency predicted using linear analysis differs from those obtained using nonlinear analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.435-435
• /
• 2010

A inclined slot-excited plasma source is newly designed and constructed for higher flux HNB(Hyperthermal Neutral Beam) generation. The present source is different from the vertical SLAN(SLot ANtenna) sources [1] in two aspects. One is that the slots are inclined, and the other is that the magnetic field is configured to a cusp type. These modifications are intended to make the source plasma operated in sub-milli-torr pressure regime and as thin as possible, both of which is to get higher HNB flux by decreasing the re-ionization rate of the reflected atoms from the neutralizer [2]. The plasma is generated in a quartz tube of internal diameter 170 mm enclosed in a aluminum application chamber of larger diameter 250 mm. The microwave power is fed to the plasma chamber by 8 inclined slots cut into the application chamber wall. The slots are coupled the chamber to a WR280 waveguide wound around it to form a ring resonator. In order to make two slots $\lambda_g/2$ apart in phase, the adjacent slots are rotated in opposite directions. The rotation angle of the slots are set to $60^{\circ}$ from the chamber axis. Between the quartz chamber and the aluminum cylindrical chamber 8 NdFeB magnets are equally spaced and fixed to form the cusp magnetic field confinement and ECR (Electron Cyclotron Resonance) field. In this presentation, the magnetic and electromagnetic simulations, and the measured plasma parameters are given for both the inclined and the vertical slot-excited plasma sources. We also discuss how the sources can be tailored to suit better-performing HNB sources.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.1043-1050
• /
• 2014

An air-core vortex is generated during draining after stirring a rotating cylindrical tank or after filling it with water. The formation of the air-core vortex and the time of its formation are dependent on drain conditions such as the dimensions of the tank, the initial rotation or stirring speed, and the shape of the drain port. In this study, a draining process using a two-stage drain port was numerically investigated. The length and radius of the first drain stage located in the lower part of the drain port were kept constant, whereas the radius of the second drain stage was varied for simulating the draining process. The simulation was conducted by considering an axisymmetric swirling flow for all cases. The declining water level was monitored by an interface capturing method. Further, the effects of the radius of the second drain stage on the time of formation of the air-core vortex and the internal flow structure were investigated.

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.1
• /
• pp.35-49
• /
• 2014

Purpose : The purpose of this study was to find the effects of the lumbar stabilization exercise and strength exercise on pain, ROM, strength, muscle thickness of low back pain(LBP) patients. Method : The subjects were consisted of twelve patients who had nonspecific LBP. All subjects randomly assigned to lumbar stabilization exercise group(N=6) and strength exercise group(N=6). We measured muscular strength, ROM by using Tergumed-extension, rotation and muscle thickness by using ultrasonography and pain score by using Visual analog scale(VAS). The lumbar stabilization exercise group received TOGU exercise, strength exercise group received Tergumed exercise. The data analyzed by repeated measure of Independent t-test, paired t-test, reliability test. Result : The results were as follows. The result which measured of the change of pain score was a significant decrease. The result which measured of the change of ROM and strength was a significant increase. The result which measured of the change of the Internal abdominal oblique, External abdominal oblique on muscle thickness was a significant increase. Stabilization exercise group and Strength exercise group showed the significant difference in muscle thickness on Transversus abdominis, Multifidus. Stabilization exercise group was more increased in muscle thickness. Conclusion : Therefore, we suggest that stabilization exercise is effective for non-specific low back pain.

• Korean Journal of Community Nutrition
• /
• v.9 no.2
• /
• pp.183-190
• /
• 2004

This study was designed to identify how customers considered menu selection attributes on menu choice, and so the instrument for measuring that question was developed and menu selection behavior types were analyzed by customers' characteristics. Cronbach's alpha to assess the internal reliability of the developed scales was 0.8361, which indicated to be highly reliable. Construct validity was assessed by principal components factor analysis with a Varimax rotation to identify underlying dimensions of menu selection and then four factors explaining 55.618% of the total variance were found. These factors were labeled as 'quality of meals', 'attractiveness of meals', 'healthfulness of meals' and 'variety of meals', respectively. As a result of analysis on menu selection factors, 'quality of meals'(3.82 out of 5) was the highest consideration followed by 'variety of meals'(3.51), 'healthfulness of meals'(3.49) and 'attractiveness of meals'(3.34), so that menu marketing approaches in the perspective of quality of meals would do lead customers' selection rates, customer satisfaction and then sales highly. Frequent visitor selected menu indifferently but customers who were interested in food and menu highly, who perceived meals' quality highly, and who were satisfied with overall foodservice did with concern. On the basis of these results of study for the target of food court-style B ＆ I foodservice operation, which was introduced as an ideal model in future foodservice market by the concept of 'customer's selection right', the following study related with customers' meal patterns and perception of foodservice by menu selection attributes would be able to predict the chances for success of food court-style foodservice operations.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.1
• /
• pp.53-61
• /
• 2019

PURPOSE: This study examined the dynamic range of motion (ROM) of the hip, knee, and ankle joint when wearing different shoe sole lifts, as well as the limb asymmetry of the range according to the leg length discrepancy (LLD) during normal speed walking. METHODS: The participants were 40 healthy adults. A motion analysis system was used to collect kinematic ROM data. The participants had 40 markers attached to their lower extremities and were asked to walk on a 6 m walkway, under three different shoe lift conditions (without an insole, 1 cm insole, and 2 cm insole). Visual3D professional software was used to coordinate kinematic ROM data. RESULTS: Most of the ROM variables of the short limbs were similar under each insole lift condition (p>.05). In contrast, when wearing a shoe with a 2 cm insole lift, the long limbs showed significant increases in flexion and extension of the knee joint as well as; plantarflexion, dorsiflexion, pronation, eversion, and inversion of the ankle joint (p<.05). Of the shoes with the insole lifts, significant differences in all ROM variables were observed between the left and right knees, except for the knee internal rotation (p<.05). CONCLUSION: As the insole lift was increased, more ROM differences were observed between the left and right limbs, and the asymmetry of the bilateral lower limbs increased. Therefore, appropriate interventions for LLD are needed because an artificial mild LLD of less than 2.0 cm could lead to a range of musculoskeletal problems of the lower extremities, such as knee and ankle osteoarthritis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.198-203
• /
• 2019

An adhesive wireless bookbinding machine was designed with optimal motor control and automatic cover insertion for bookbinding. The noise level was improved by modifying the thrust of the machine and changing from a compressor method to an AC induction motor control method. The automatic cover insertion function was added to improve the task speed. Motor and decelerator damage can be caused by sudden braking and acceleration of the motor rotation (clockwise and counter-clockwise), so a buffer-type locational control system was developed to secure stable movement and durability. The complicated internal design was also simplified, and the volume and weight were decreased. The results show that the noise was decreased by 57% from 135 dB to 71.7 dB, and the task speed was decreased by 57% from 18 s to 9.58 s. The automatic cover insertion was designed to supply a maximum of 130 sheets per supply.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.89-94
• /
• 2019

K1A1 tank commander's primary thermal sight is a device that enables tank commanders to detect, identify, aim and track the target by observing targets in all directions during day, night and in situations of smokescreen and fog through $360^{\circ}$ rotation independent from the gunner's primary thermal sight and stabilizing the line of sight even under the vibrations occurring when the tank is standstill and moving. The main function of this device is to detect and process visible and thermal images and deliver the final images to the tank commander. One of the core parts to that end is the observation window (daytime/thermal image window). This core part is mounted at the entrance of the optical path for observing the target and plays the role of making visible light during the daytime and infrared light during the night pass through the target and transmitting the resultant images to the internal optical system of the tank commander's primary thermal sight. Such core parts have been selected as depot maintenance items so that they are replaced by new parts instead of being recycled when they are subjected to maintenance in most cases. That is, the military budget is wasted because such parts are replaced by new parts despite that they can be recycled for maintenance. Therefore, this study proposed a mounting tool for polishing and coating observation windows (daytime and thermal image window) using planar polishing equipment and DLC (Diamond-Like Carbon) coating equipment. In addition, this study presented an amendment (proposal) of the Depot Maintenance Work Request (DMWR) already published to verify the performance of recycled products including the establishment of inspection standards for recycling processes.

• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.323-332
• /
• 2019

The purpose of this study was to examine the validity and reliability of the Revised Multidimensional Coping Scale(MCS-R) in university student who attended smoking cessation group therapy. Data were collected from 198 university students. Construct validity using exploratory factor analysis were conducted and convergent validity using Resilience scale, Patient Health Questionare-9(PHQ-9) were conducted. A Principal components analysis with varimax rotation and Kaiser normalization identified a thirteen-factor accounting for 69.7% of the variance in scores. Also, the internal consistency(0.66-0.94) and test-retest reliability was adequate(0.44-0.85) in all subscales of the MCS-R. The MCS-R has adequate psychometric characteristics so it can be used to verify.