• Journal of Veterinary Clinics
• /
• v.31 no.1
• /
• pp.46-50
• /
• 2014

A 7-year-old spayed female Welsh corgi presented with a mass of the skull. The mass was diagnosed as multilobular bone tumor and surgically removed. To treat a large bone defect after the tumor removal, custom-made artificial bone fabricated by a 3-dimensional ink-jet printer was implanted in the defect. Follow-up computed tomography evaluation was performed for 4.3 years. The implant was well integrated with the skull and had covered the large bone defect during the follow-up period. Gradual degradation of the implant began 6 weeks after surgery. It provides an additional option for the treatment of large bone defect.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.3
• /
• pp.25-32
• /
• 2011

The matric suction and volumetric water content of dredging soils obtained from Saemangeum area were measured by the automated Soil-Water Characteristic Curve (SWCC) apparatus under both drying and wetting conditions. Based on the test result, SWCCs of the dredging soils were estimated by the van Genuchten(1980) model. The matric suction of drying process is larger than that of wetting process at a same effective degree of saturation. The suction stresses for various matirc suctions were estimated using Lu and Likos(2006) model and the Suction Stress Characteristic Curves (SSCC) were predicted using the independent parameter of SWCC. The suction stress of drying path was increased and decreased, while the suction stress of wetting path was continuously decreased with increasing the effective degree. Also, the suction stress of drying path is larger than that of wetting path at a same effective degree of saturation. The Hydraulic Conductivity Function(HCF) was also predicted by the van Genuchten(1980) model. The hydraulic conductivity was increased with increasing the volumetric water content. The hydraulic conductivity of drying path is larger than that of wetting path at a same matric suction. According to the results of SWCCs and SSCCs, the hysteresis phenomenon of suction stress or matric suction during both drying and wetting paths was occurred. The main reason of hysteresis phenomenon is a ink bottle effect of water among soil particles.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.557-565
• /
• 2005

This paper presents the development and implementation of a zero-copy file transfer mechanism that improves the efficiency of file transfers for PC cluster systems using hardware-based VIA(Virtual Interface Architecture) network adapters. VIA is one of the representative user-level communication interfaces, but because there is no library for file transfer, one copy occurs between kernel buffer and user boilers. Our mechanism presents a file transfer primitive that does not require the file system to be modified and allows the NIC to transfer data from the kernel buffer to the remote node directly without copying. To do this, we have developed a hardware-based VIA network adapter, which supports the PCI 64bit/66MHz bus and Gigabit Ethernet, as a NIC, and implemented a zero-copy file transfer mechanism. The experimental results show that the overhead of data coy and context switching in the sender is greatly reduced and the CPU utilization of the sender is reduced to $30\%\~40\%$ of the VIA send/receive mechanism. We demonstrate the performance of the zero-copy file transfer mechanism experimentally. and compare the results with those from existing file transfer mechanisms.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.161-169
• /
• 2009

The objective of this study was to investigate stability of Korean Paper(Hanji) which is being sold in the Korean markets according to aging treatment. In order to know the aging characteristics, the optical and mechanical properties of before and after wet and dry-heat aging treatment were examined. The optical and mechanical properties were shown higher reduction in the dry-heat aging treatment compared to the wet-heat aging treatment. The Soonji (pure mulberry Hanji) made from black mulberry bast pulp was shown a great reduction of the brightness and whiteness, and increase of the opacity in the aging treatment. On the other hand, in case of mechanical properties, the breaking length of Soonji made from white mulberry bast pulp was significantly higher than that of the others, and the tensile strength was shown drastic reduction in according to Soonji made from black mulberry bast pulp in the aging treatment. The burst strength of Soonji made from black and white mulberry bast pulp was shown the similar value in the wet-heat aging treatment. The folding endurance of Soonji made from white mulberry bast pulp was significantly higher than that of others before and after aging treatment. Consequently, Hanji was affected sensitive in the temperature compared to the humidity. Meanwhile, the density and color of the chinese ink was no significant changes before and after wet and dry-heat aging treatment.

• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.261-265
• /
• 1994

To detect naturally occurring bioactive compounds in unused marine resources such as marine by-products and algae, the screening test for the antimicrobial compounds containing in Asterina pectinifera, Halocynthia rotetzi skin, Nototodarus sloani ink. Anthocidaris crassispina skin, and four algae(Sargassum horneri, Agarum cribrosum, Odonthalia corymbifera and Desmarestia ligulata) was carried out. The minimum inhibitory concentrations(MIC, ${\mu}g/disk$) of ether and methanol fractions extracted from Sargassum horneri against Bacillus subtilis were 80 and 70 ${\mu}g/disk$, respectively. The MICs of the ether, acetone and methanol fractions extracted from Sargassum horneri against Staphylococcus aureus were 160, 180 and 70 ${\mu}g/disk$, respectively. In addition, the MICs of ether and acetone fractions extracted from Odonthalia corymbifera against Staphylococcus aureus were 50 and 170 ${\mu}g/disk$, respectively. These nonpolar fractions showed the strongest antimicrobial effect among several fractions extracted from tested marine resources.

• Fashion & Textile Research Journal
• /
• v.9 no.5
• /
• pp.538-544
• /
• 2007

We usually try to accomodate ourselves to our nature surroundings interacting with nature. There fore I've decided to apply nature materials, esp. the pine to Hair Art as a way of expressing our feelings from Nature. 'Hair Art' is a follow-up study based on the various artistic point of view. There has been various works of 'Hair Art' with nature materials. However, it is rare to see a work of 'Hair Art' with the pine. That's why I've decided to study more about this. This study is a new experiment in 'Hair Art' against a conventional idea "Hair Art values practicability." Therefore, the primary goal of this study is to do much for the cause of learning in 'Hair Art' and encourages some development of 'Hair Art' industry. I've researched an image of a pine tree in art of Joseon Dynasty and contemporary art. Then I've tried to apply the image to a work of 'Hair Art'. First of all, in a view of expression technique for the symbolism of the pine, the artists in Joseon Dynasty drew pictures of a pine tree with a paintbrush but the modern artists make a new attempt from the thought of Modernism. We can find it in some photos. Next, to express traditional oriental idea such as 'unconventional and elegance', comtemporary artists chose the symbolism of the pine tree as an object of their works like pen and ink sketches from the thought of Modernism. Third, in a fusion style picture which contains features of both oriental paintings and western paintings and in a sexualism style picture that depicts a harmony of a male and a female as a shape of a pine, we can find colorful images of a pine tree and Their figurative beauty in art. Those are another symbols of the pine. In conclusion, the implication of the pine tree still hasn't changed even there are differences of drawings of pine tree in the past and the present. I've tried to combine these symbolic ideas of the pine with 'Hair Art' and made 5 hair styles. Throughout the process of researching this topic which is 'The Study of Hair Art Using The Symbolism of The Pine', I've realized that pine trees make it possible to express intrinsic tough spirit of human being and abundance in color and figurative beauty in art. I hope this can contribute to the field of 'Hair Art' and would become an important educational resource for further study.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.39-41
• /
• 2011

The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.05a
• /
• pp.47-70
• /
• 2008

Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)

• Analytical Science and Technology
• /
• v.23 no.4
• /
• pp.423-428
• /
• 2010

In this study, VOCs of black gel pen inks was screening to identify individual characteristic of gel pen inks. Detected VOCs was total 20 species(isopropylalcohol, 2-methyl-2-propanol, 2-butanone, hydrazinecarbothioamide, benzeneacetic acid (ethyl ester), benzeneacetic acid, dimethoxymethy-silane, 2,2-dimethoxybutane, tetrahydro-2-methyl-furan, 1,2-ethanediol, silicic acid (tetramethyl ester), 1,2-propanediol, propyleneglycol, 3-ethyl-3-hexanol, 1,1-dipropoxy-propane, 2-butoxy-ethanol, 2,2'-oxybisethanol, 1-butyl-benzene, 2-pyrrolidinone, 2-(2-butoxyethoxy)-ethanol). We detected 2,2-dimethoxybutane (3.02~47% ratio) and tetrahydro-2-methyl-furan (1.19~52.19% ratio), 1,2-ethanediol (52.83~95.84% ratio). In case of manufacturer, manufactured ink was able to discriminate between Japan and Korea by distinct characteristics (Japan: 1,2-ethanediol, 52.83~95.84%, Korea: 1,2-propanediol, 76.17~93.51%). The results of this study indicated that distinct characteristic about manufacturers and brands could make a classifring tool of inks for identification of between gel pen inks.

• Analytical Science and Technology
• /
• v.23 no.4
• /
• pp.414-422
• /
• 2010

In forensic examinations of question document, analysis about inks components and the dating of ink entries is often of considerable importance and forensic examination of inks is principally concerned with the classification and comparison of chemically complex mixtures. The authenticity about inks analysis of a questioned document may be examined through the analysis of inks used to TLC, HPLC/MS, GC/MS, LDI/MS. We collected 56 difference types of black ballpoint pen inks manufactured from 5 country groups. We identified major 6 species volatile organic components (VOCs), ethylbenzene ($0.089-0.244\;{\mu}g$/mL), o-xylene ($0.072-0.331\;{\mu}g$/mL), m,p-xylene ($0.062-0.318\;{\mu}g$/mL), benzene ($0.003-0.173\;{\mu}g$/mL), 1,1-dichloroethylene ($0.003-0.295\;{\mu}g$/mL), toluene ($0.007-0.484\;{\mu}g$/mL) using HS-SPME GC/MS. The results of this study indicated that determined VOCs of black ballpoint pen inks could make a discriminating tool of inks analysis for forensic question document and can supply methodology for classification and identification of between ballpoints pen inks.