• 자원ㆍ환경경제연구
• /
• 제11권1호
• /
• pp.145-184
• /
• 2002

This paper analyzes the impact of imposing carbon tax on the Seoul economy to reduce Greenhouse Gas(GHG) emission. We construct the social accounting matrix of Seoul, specifying energy and transport sectors which is closely related to air pollution. Then, we formulated the computable general equilibrium (CGE) model of seoul and performed scenario analysis. The main result shows that the economic cost of GHG reduction is quite large but the health benefit is also considerable. It also suggests the importance of cost effective measures such as the development of new energy technology and the improvement of energy efficiency.

• 한국표면공학회지
• /
• 제35권4호
• /
• pp.206-210
• /
• 2002

The use of Spectra fibers as fiber cloth is increasing because of their excellent impact resistance. However, a major limitation on the use of Spectra fibers is a chemical inertness. In this Study, Spectra fibers were surface-treated using Ar$^{+}$ ion beam under oxygen environment to improve the tensile property of Spectra/vinylester composites. The effect of surface treatment of Spectra fibers on the tensile property of Spectra/vinylester composites was determined from tensile tests using Spectra/vinylester composite specimens with and without a hole. It was found that the tensile stiffness and strength of surface-treated case were 22% and 17% higher than those of untreated case for specimens with no hole. The maximum load of surface-treated case was about 15% higher than that of untreated case for specimens with a hole.

• 한국표면공학회지
• /
• 제35권4호
• /
• pp.218-231
• /
• 2002

As the environmental regulation worldwide emerges, most notably in Europe and Japan, the elimination of Pb usage in electronic assemblies has been an important issue for microelectronics assembly due to the inherent toxicity of Pb. This has provided an impetus towards the development of Pb-free solders. A major factor affecting alloy selection is the melting point, since this will have a major impact on the other polymeric materials used in microelectronic assembly and encapsulation. Other important manufacturing issues are cost, availability, and wetting characteristics. Reliability related properties include mechanical strength, fatigue resistance, coefficient of thermal expansion and reactivity with substrate. In this article, Pb-free solder alloys have been proposed so far have been reviewed and are summarized.

• 한국통신학회논문지
• /
• 제27권7B호
• /
• pp.737-743
• /
• 2002

It is an essential design process to analyze the performance of Synthetic Aperture Radar (SAR) processor before implementation. The contribution of this paper is to identify the chief sources and types of errors, to assess their impact on system performance, and to suggest the analysis technique for principal performance of the space-based SAR processor using Range-Doppler Algorithm (RDA). Also, simulation is performed by the Experimental-SAR (E-SAR) processor to examine the practicability and efficiency of the technique, the results are discussed, and solutions for the problems are recommended. Therefore, this technique can be used to analyze the performance of the space-based SAR processor using RDA.

• KIEE International Transactions on Power Engineering
• /
• 제2A권4호
• /
• pp.166-173
• /
• 2002

Dispersed Generation (DG) units significantly effect the existing distribution protection practices. Therefore, new protection practices of the distribution system interconnected with DG units should be reevaluated and developed. In this paper, a new inter-tie protection scheme of DG units for distribution automatic reclosing is proposed. The impact of DG units on existing radial-sectionaliser coordination is analyzed. And the effects of the distribution reclosing type (radial and passive reclosing) on DG dynamics are analyzed and classified. From the results of the DG dynamic responses by the reclosing type, i.e. radial and passive reclosing, the inter-tie protection schemes of DG are introduced to improve the reliability and availability of utility interactive DG. The proposed schemes are proved and evaluated by a case study using PSCAD/EMTDC simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2252-2254
• /
• 2002

The Reactor internal structures which consist of many complex components are subjected to flow-induced vibration due to high temperature and pressure in Reactor coolant system. The above flow-induced vibration causes degradation of structural integrity of the Reactor and may result in loosing mechanical binding component which might impact other equipment and component or cause flow blockage. It is important to analyze reactor noise signal for the early detection of potential problem or failure in order to diagnosis reactor integrity in the point of view of safety and plant economics. Detailed composition of diagnostic system reactor internal structures using neutron noise(RIDS).

• 접착 및 계면
• /
• 제3권3호
• /
• pp.1-6
• /
• 2002

본 연구에서는 고무 재료의 설계 인자 중 어떤 것이 소음에 주된 영향을 주는지 검토하였고, 저소음 타이어 개발을 위한 고무 재료의 설계 방향을 제시하였다. 소음은 무향실 타이에 소음과 고무 시편의 충격 소음을 측정하였고, 고무 시편의 물성은 경도, 인장 물성 및 동적 점탄성을 측정하였다. 타이어 소음에 영향을 주는 고무 재료의 주된 설계 인자는 경도 또는 300% 모듈러스이고 양자간에는 정의 상관관계가 있다. 따라서 고무 재료의 경도 또는 300% 모듈러스를 낮게 설계하면 소음을 저감시킬 수 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.78-85
• /
• 2002

This paper deals with the finite element model of the monitor for the simulation of directional free drop tests such as backward, sideward, edge and vertex drop. The model was made for an unconditional stable solution for the explicit integration algorithm. The general behaviors at the time of impact were found to well correlate with the actual situation in terms of acceleration, displacement, contact force and stress of monitor components even though the experiment of the associated drop is performed for the validity of the model.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.489-496
• /
• 2002

Monitoring frequency change is a tool to indicate the change ill structural parameters. However, even critical reduction of stiffness is predicted in the range of indication errors due to the effect of temperature on the frequency change. In this study, an experimental work to examine the effect of various temperatures on modal characteristics of steel plate-girders is presented. A model plate-girder used for the experiment is described. Natural frequencies are monitored by using two different excitation sources-impact and shaker. The relation between measurement temperatures and natural frequencies are analyzed.

• Journal of Welding and Joining
• /
• 제20권5호
• /
• pp.63-71
• /
• 2002

One of the shortcoming of ferritic stainless steels is their limited toughness. The most important factor governing the toughness of ferritic stainless steels is hewn to be their interstitial contents. Due to the limited solubility of carbon and nitrogen in the ferrite matrix, it is difficult to avoid carbide and nitride precipitates. In the study, the role of nitrogen on the toughness of 260r-2Mo superferritic stainless steel welds has been investigated using alloys containing various nitrogen levels between 100 and 1640 ppm. Mechanical properties of weld metals have been evaluated by microhardness, Charpy impact test and notch tensile test. The alloys are mainly embrittled by the grain boundary and intragranular nitride precipitation. Grain boundary precipitates are considered to be more deleterious than intrauanular nitrides. Fracture mechanism have been elucidated through microscopic evaluation of notch tensile test