• Steel and Composite Structures
• /
• 제46권3호
• /
• pp.345-352
• /
• 2023

A thermal-mechanical coupling finite element model of the steel-plate concrete composite (SC) wall is established, taking into account the strain rate effect and variation in mechanical and thermal properties under different temperatures. Verifications of the model against previous fire test and impact test results are carried out. The impact response of the SC wall under elevated temperatures is further investigated. The influences of the fire exposure time on the impact force and displacement histories are discussed. The results show that as the fire exposure time increases, the deflection increases and the impact resistance decreases. A formula is proposed to calculate the reduction of the allowable impact energy considering the fire exposure time.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.331-337
• /
• 2011

Purpose: The purpose of this study was to impact of force system change in finger spring that add helical coil one round on orthodontic force. Methods: The following conclusions were drawn from the experiment conducted after bending 90 samples with a CNC wire forming machine while changing the height and lumen size to 1mm - 3mm - 5mm and 2mm - 3mm - 4mm respectively in the coil of the force system in finger spring added with one wheel of helical coil of 18-8 stainless steel round wire (${\Phi}0.5mm$, spring hard) from Jinsung Co. in domestic market under the following conditions: Laboratory name = Instron 5942; Temperature($deg^{\circ}C$) = 18.00; Humidity(%) = 50.00; Rate 1 = 10.00000 mm/min; Compressive extension = 5.0mm. Results: When Coil height is 1, 3, 5mm and lumen size is 2, 3, 4mm reduce finger spring as mean value of compressive extension occasion maximum load(mN) increases as coil height rises, and lumen size grows to 5.0mm. And was expose that compressive load(mN) increases as coil position of finger spring rises and increase as lumen size is decrescent. Conclusion: As the adherence height of coil was raised from 1mm through 3mm to 5mm, compressive load increased. As the lumen size increased from 2mm through 3mm to 4mm, compressive load decreased. Therefore, these results suggest that it is desirable to lower the coil height and enlarge the lumen size to enhance the biomechanical efficiency of finger spring when manufacturing the finger spring for removable orthodontic devices.

• 수산해양기술연구
• /
• 제59권4호
• /
• pp.344-353
• /
• 2023

In the actual sea, the additional resistance due to external force such as wind, current and wave is accompanied, and the required power is added in response to these resistance. Especially when the ship is sailing at low speed, the effects of wind and current have a great impact on the safe control of the ship. Likewise, it is thought that the effects of wind and current have a great impact on the trawl ship control since the towing speed of a bottom trawl ship is a low speed of 3 to 4 knots. If the reduce of ship speed and the increase of engine power due to the influence of wind and current can be identified, the safe towing power can be calculated based on a given engine output. Thus, the appropriate size of a fishing gear can be determined. In this study, a total of 20 trawl operations were conducted for seasonal maritime research in the same research area according to the operation mode of propeller. Based on navigation data, trawl fishing data, and engine performance data acquired during the towing fishing gear, and data of ship speed, hull resistance, fishing gear resistance, wind force and current force according to an incidence angle were estimated. The overall power for these loads was calculated and compared with the measured engine power, and the effects of wind force and current force on the engine power were investigated.

• 한국전산구조공학회논문집
• /
• 제32권2호
• /
• pp.75-86
• /
• 2019

원자력발전의 최대 걸림돌은 사용 후 핵연료인 고준위폐기물이다. 높은 방사능과 발생하는 열은 사용 후 핵연료의 안전한 처분을 어렵게 하고 있다. 현재 유일한 처리방법은 심지층 처분기술이다. 본 논문은 이와 같은 심지층 처분기술의 핵심기술 중의 하나인 처분용기의 구조안전성 설계문제를 다루고 있다. 특히 처분장에서 처분용기 처분 시 사고로 운송차량에서 추락낙하 하여 지면과 충돌하는 경우 처분용기에 가해지는 충격력에 의하여 처분용기에 발생하는 응력 및 변형에 대한 비선형구조해석을 수행하였다. 해석의 주된 내용은 심지층 처분장에서 운반차량으로 처분용기 운반 중 사고로 추락낙하 하여 지면과의 충돌 시에 처분용기에 가해지는 충격력을 기구동역학해석 상용 컴퓨터코드인 RecurDyn으로 구하고 이 충격력에 의하여 처분용기에 발생하는 응력 및 변형을 유한요소 정적 구조해석 상용 컴퓨터코드인 NISA를 이용하여 구한 것이다. 해석결과는 충돌 충격 시간 중 발생하여 처분용기에 가해지는 충격력에 의하여 처분용기, 특히 처분용기의 위 덮개 혹은 아래 덮개에 큰 응력과 대변형이 발생함을 보여주고 있다.

• 한국음향학회지
• /
• 제30권2호
• /
• pp.92-99
• /
• 2011

본 연구의 목적은 일본의 표준 중량충격원인 임팩트 볼을 국내의 표준중량충격원으로 도입시 바닥충격음 실험에 있어서 정확성에 대해 실험을 통해 알아보고자 했다. 이를 위하여 임팩트 볼을 이용하여 낙하 높이별, 가진위치를 바꾸어서, 수음점 높이에 대한 논의를 진행하였고, 임팩트 볼을 이용한 바닥충격음을 측정하고 이를 실제 충격원인 뛰는 충격음과 비교하여 실제 충격음과 가장 유사한 낙하 높이에 대한 검토를 실시하였다. 또한 일본 주택에서 주로 사용되고 있는 목구조와 국내 공동주택의 기본 구조인 콘크리트 구조에서의 바닥충격음 특성차이를 알아보기 위해 실험동에서 같은 조건으로 시험을 실시하여 시공재료 및 구법에 따른 차이를 알아보고자 하였다. 이에 대한 결과는 목구조에서는 낙하 높이가 10 cm에서 30 cm사이의 충격음이 실제 충격음과 비슷한 음압레벨을 갖는 것으로 나타났고 콘크리트 구조에서는 유사한 음압의 높이는 없었다. 또한 사람이 임팩트 볼을 운용하면서 표준낙하높이를 기준으로 상 하 10 cm 높이차로 생기는 오차는 역 A특성 값에서 약 1 dB이하 정도로 작은 오차를 나타내긴 하지만 우리나라에 표준 중량충격원으로 도입할 때에는 다양한 콘크리트 바닥구법에 따른 바닥충격음의 특성에 따른 적합한 임팩트 볼의 낙하 높이 및 측정 마이크로폰의 높이에 대한 고려는 신중히 하여야 한다.

• Computers and Concrete
• /
• 제30권1호
• /
• pp.19-32
• /
• 2022

This paper presents an investigation into the failure of RC columns under impact loadings. A numerical simulation of 19 identical RC columns subjected to single and repeated impact loadings was performed. A free-falling hammer was dropped at midspan with the same total kinetic energy input but varying mass and momentum. The specimens under the repeated impact test were struck two times at the same location. The colliding index, defined as the impact energy-momentum ratio, was proposed to explain the different impact responses under equal-energy impacts. The increase of colliding index from low to high indicates the transition of the impact response from static to dynamic and failure mode from flexure to shear. This phenomenon was more evident when the column had a greater axial load and was impacted with a high colliding index. The existence of the axial load had an inhibitory effect on the crack development and increased the shear resistance. The second impact changes the failure mode from flexural to brittle shear as found in the specimen with 20% axial load subjected to high a colliding index. Moreover, a deflection prediction equation based on the impact energy and force was limited to the low colliding index impact.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.38-42
• /
• 2000

In this study, the low velocity impact behavior of the composite laminates has been described by using 3 dimensional nonlinear finite elements. To describe the geometric nonlinearity due to large deformation, the dynamic contact problem is formulated using the exterior penalty finite element method on the base of Total Lagrangian formulation. The incremental decomposition is introduced, and the converged solution is attained by Newton-Raphson Method. The Newmark's constant-acceleration time integration algorithm is used. To make verification of the finite element program developed in this study, the solution of the nonlinear static problem with occurrence of large deformation is compared with ABAQUS, and the solution of the static contact problem with indentation is compared with the Hertz solution. And, the solution of low velocity impact problem for isotropic material is verificated by comparison with that of LS-DYNA3D. Finally the contact force of impact response from the nonlinear analysis are compared with those from the linear analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.117-120
• /
• 2007

The floor slabs of building structures are often subjected to the periodic force which is induced by vibrating machines or human activity(walking, jumping, running etc). These periodic forces cause excessive oscillation. In order to examine the dynamic characteristics of floor slabs, the dynamic characteristics test is accomplished. Generally, the Impact Hammer and Dynamic Exciter test is used to dynamic characteristics test. But the Impact Hammer test is not suitable to apply in building slabs. In this paper, It compared the performance of the Exciter and Impact Hammer test for dynamic characteristics analysis of floor slabs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.745-748
• /
• 2002

Many malfunctions take place in container crane spreader due to impact. So we designed a 2DOF hydraulic impact absorbing system and studied the change of impulse with respect to the variation of falling height and weight. The falling height becomes higher than 1m and the falling weight goes up heavier than 100kg, the impact absorbing rate was lower. When spreader is bumped against container and impulse force concentrates on one point, impact absorbing equipment would not be operated properly and make some trouble.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.16-16
• /
• 2003

In this study, for a safety assessment of wheelchair occupant in side impact, we used a dynamic sled impact test results. The test was carried out total 6 times and impact speed was 13g$\pm$0.43/28km/h$\pm$0.95, By using EURO SID-1 dummy, head performance criteria(HPC), abdominal peak force, etc. were measured. We evaluated wheelchair occupant safety by motion criteria(MC) which was measured by head, trunk and side deformation change of wheelchair and Head & Neck injury criteria(HNI) measured by using head and neck deformation angle and time relation. When we assumed that the maximum injury value in side impact was 100%, the results of motion criteria(MC) of wheelchair occupant were max 80.3, mim 32.3 and average 60.3%, Head & Neck injury criteria(HNI) value were max 118.4, min 14.5 and average 59.7%.