• 한국항행학회논문지
• /
• 제15권5호
• /
• pp.823-832
• /
• 2011

최근 공공기관 및 금융권에서는 경쟁력 향상을 위한 정보시스템의 통합으로 프로젝트 규모가 대형화되고 있으며, 프로젝트 수도 날로 증가하고 있어 정보시스템 프로젝트 관리를 위한 적절한 방안이 필요하다. 프로젝트 관리, 성공요인 및 실패요인에 대한 연구는 많이 수행되었으나, 프로젝트 관리 영역 간에 미치는 영향에 대하여 체계적인 연구가 미흡하였다. 본 연구는 선행 연구와 발주자, 개발 PM과 정보시스템 구축 전문가들인 정보처리기술사를 대상으로 설문 및 인터뷰를 통하여 범위, 일정, 품질, 인력, 위험 프로젝트 관리영역으로 도출하였다. 그리고 도출된 각 관리영역들에 대하여 상호 미치는 영향도 및 관리영역간의 상대적인 중요도의 분석하였고, 관리영역의 진행 상태를 계획, 실행, 완료 단계로 구분하고, 각 진행단계의 수행상태를 평가하는 틀을 제시하였다.

• 농촌계획
• /
• 제22권4호
• /
• pp.103-114
• /
• 2016

The global trade partners have been diversified and mixed in agricultural market, which is expended the international agri-food market through the Regional Trade Agreement and World Trade Organization, etc. The aim of this study is to derive influential factors for exports increases of agricultural products targeting to Association of South-East Asian Nations (ASEAN). We set the equation for agricultural products exports referred to panel gravity model considering panel fixed effect for controlling endogeneity within variables. The results of this study are the follows; (1) Social economic distance considering international oil price negatively affects in the mushroom model; (2) Korean GDP affects (-) in a mushroom model and (+) in a vegetable model, however, ASEAN's per capita GDP indicates opposite influence in the same model; (3) Relative exchange rate shows negative impact in a vegetable model; (4) The entry status into WTO and the status in force of FTA have converse effects in mushroom and vegetable model, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권7호
• /
• pp.844-853
• /
• 2014

수상함정에 사용되는 능동소나는 통상적으로 구상선수부에 설치하게 된다. 따라서 구상선수부에 설치된 소나의 항해 중 유체력 및 수중 부유물에 의한 충돌 파손을 막기 위해 밀도가 낮으면서 강도가 높은 복합소재 재질의 소나돔 윈도우를 설치하게 된다. 외부 유체력 및 충격 발생 시 소나돔 윈도우의 안정도는 소나돔 윈도우 내외부의 압력 분포에 따라 달라지므로 본 연구에서는 소나돔 충, 배수 밸브의 상태에 따른 소나돔 윈도우의 내외부 압력변화를 해석적으로 검토하고 이에 따른 응력변화를 파악하고자 한다.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1849-1856
• /
• 2010

유리/레진/유리의 샌드위치 구조는 자동차, 바이오, 디스플레이 산업 등에서 이미 상용화되고 있는 구조이다. 이러한 유리/레진/유리의 샌드위치 구조는 최근 반도체, MEMS분야 등에서 대량생산기술로 관심을 일으키고 있는 임프린트 리소그래피 공정에서도 다루어지고 있다. 나노 임프린트 공정 기술은 몰드의 마이크로, 나노패턴을 기판에 반복적으로 전사함으로써 반도체 제조공정에서 5나노미터(nm) 이하의 선폭까지 구현할 수 있는 기술이다. 이 과정에서 사용되는 레진은 패터닝된 몰드에 의해 변형되고 UV(Ultraviolet rays)에 의해 경화되어 패턴의 전사과정을 거친다. 이 때 몰드와 기판의 이형거동은 나노 단위의 정밀한 정렬과 공정의 생산성과 직결된다. 따라서 본 연구에 서는 4점 굽힘 실험을 통해 유리/레진/유리 구조의 굽힘 강도를 측정하였고, 특히 이 과정에서 계면해방률을 도출함으로써 나노 임프린트 공정 시 몰드와 레진 층의 이형거동을 기계적 측면에서 고찰하였다.

• Tribology and Lubricants
• /
• 제31권5호
• /
• pp.221-228
• /
• 2015

It is possible to prevent a piston from contacting the cylinder by changing the shape of the piston or by applying micro-textures, such as micro-grooves or micro-holes, over the piston surface. Usually, the minimum radial clearance reaches its minimum value at the beginning of the suction stroke because the pressure around the piston is low and almost axisymmetric such that the net pressure force on the piston is not sufficiently high to support the piston from touching the cylinder. In this study, we apply a series of saw-tooth-shaped grooves on the piston surface, and numerically investigate the effects of groove depth, groove angle, and the number of grooves with radial clearance variations using a finite difference method. We conduct a dynamic analysis of the piston for various changes in groove geometries to obtain the minimum radial clearance variation for the entire compression cycle. The minimum radial clearance increases while friction loss decreases when we apply the series of saw-tooth-shaped grooves on the piston. In addition, we analyze the impact of the change in the groove shape variable due to changes in radial clearance. Leakage variations are relevant to radial clearance, but have almost no effect on the groove parameters.

• Archives of Plastic Surgery
• /
• 제33권6호
• /
• pp.776-779
• /
• 2006

Purpose: Prior to closure of the epiphysis of the distal phalanx, fracture usually occurs through the growth plate, Salter-Harris type I or II, or through the juxtaepiphyseal region 1 to 2 mm distal to the growth plate. The terminal tendon of extensor inserts into the epiphysis only, while insertion site of the flexor digitorum profundus spans both the epiphysis and metaphysis. Because of the difference between these tendon insertions, this injury mimics a mallet deformity. But, this type of injury does not involve a tear or avulsion of the extensor, unlike mallet finger of adults. Seymour was the first to describe this type of injury in children and called after his name, Seymour's fracture. This fracture is prone to infection or remain the residual deformity unless adequate treatment. Methods: We report a case of Seymour's fracture. A 9-year-old boy presented a laceration of the nail matrix, with the nail lies degloved from the nail fold on the right middle finger gotten from an impact against a door. An X-ray examination showed the fracture line lying 1 mm distal to the growth plate. The injury was treated with debridement and the fracture was reduced by applying hyperextension force. Under the C-arm, a single 0.7 mm K-wire was used to immobilize the distal interphalangeal joint. Intravenous antibiotics were applied for 5 days after surgery. Results: The K-wire was removed in the 3rd week. No infection or significant deformity was found until follow-up of 12 months. Conclusions: Seymour's fracture may be at first classically mallet deformity by its appearance. But it is anatomically different and more problematic injury. If it isn't corrected at the time of injury, derangement of the extensor mechanism, and growth deformity of the distal phalanx may occur. The fracture site should be debrided, removed of any interposed soft tissue, and the patient should be given appropriate antibiotics. Reduction should be maintained by K-wire fixation. We experienced no infection or premature epiphyseal closure.

• 수산해양기술연구
• /
• 제53권1호
• /
• pp.41-48
• /
• 2017

Encircling gill net fishery is a kind of gill net which is generally used in shallow coastal waters. After the fish have been encircled by the gill net, noise stimulus such as a stone or sound is used to force them to gill or entangle themselves in the netting surrounding them. Although the fishing by a stone is a traditional fishing method, it is considered as an illegal fishing method by physical stimulus such as explosives and mechanical vibrator. However, this illegal fishing method has raised some problems to the fishing boat of other fisheries or many anglers due to disturb aggregating fish schools. This study is aimed to provide scientific base data to verify whether to impact the ecosystem caused by this encircling gill net. This study exhibited that the impulse noise by concrete sphere in the encircling gill net was $159dB/{\mu}Pa$, the ambient noise from ship engine was $160dB/{\mu}Pa$, and the maximum noise from continuous artificial vibrator was $175dB/{\mu}Pa$. These may be stimulus to the escape of fish distributed in a wide area in its natural state; it is not likely the cause of death due to catastrophic stress. Therefore, it needs to prepare the consideration of standard limit on fishing stimulus in fishing methods of the fishery laws and regulations, prevent fishermen form using illegal fishing gear (i.e. explosive sound standards: $200{\sim}220dB/{\mu}Pa$ and provide them with countermeasures.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.41-47
• /
• 2017

Recent studies have shown that there are various systems which can be used to monitor hazardous area in a debris flow location, but lack of methodological research on the exact location where each instrument should be installed has hindered the success of this systems. The objective of this study is to suggest the measurement system for monitoring debris-flow and propose the effective method to determine location of measurement system. Previously studied, from 1991 to 2015, were referred and the applied ratio of every instrument was investigated. The measurement information was divided into 8 categories including rainfall, debris-flow velocity, displacement, fluid pore pressure, ground vibration, image processing, impact force and peak flow depth. The result of this study revealed that the most applied instruments to be rain gauge and geophone for measuring average rainfall and ground vibration respectively. The Analytic Hierarchical Process (AHP) method was selected to determine installation location of instrument and the weighting factors were estimated through fine content, soil thickness, porosity, shear strength, elastic modulus, hydraulic conductivity and saturation. The soil thickness shows highest weights and the fine content relatively demonstrates lowest weights. The score of each position can be calculated through the weighting factors and the lowest score position can be judged as the weak point. The weak point denotes the easily affecting area and thus, the point is suitable for installing the measurement system. This study suggests a better method for safely managing the debris-flow through a precise location for installing measurement system.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.78-84
• /
• 2017

최근 자동차 업계는 연비향상 및 안전성 강화를 위해 경량 신소재를 적용하여 부품의 경량화를 추구하고 있다. 이를 위해 차체 부품 소재로서 고장력강판의 적용 비중이 50%를 넘고 있는 실정이다. 이에, 본 논문에서는 범퍼빔 부품의 소재로 고장력강판 적용을 위한 기초 연구로서 소재 및 두께 변경에 따른 범퍼빔의 구조강성과 에너지 흡수능력을 해석적 방법으로 비교 평가하였다. 우선 고장력강판을 범퍼빔에 적용하기 위해 기존의 범퍼빔 단면형상과는 다른 타입의 범퍼빔 단면형상을 설계하였으며, 굽힘해석을 통해 설계된 범퍼빔이 충분한 구조성능, 즉, 구조강성과 굽힘하중력을 가지고 있는지 조사하였다. 중앙접합부의 형상에 따라 굽힘에 대한 구조성능은 현저한 차이가 관찰되지는 않았으며, 25ton, 7.5ton/mm내외의 충분한 굽힘저항력과 강성을 가지고 있는 것으로 조사된다. 또한, 충돌해석을 통해 소재 및 두께를 변경하였을 경우의 효과를 비교평가하였다. 해석결과 고장력강판을 범퍼빔에 적용하기 위해서는 두께를 줄임으로써 기존소재에 버금가는 에너지흡수성능을 구현할 수 있으며, 동시에 뚜렷한 경량화를 이룰 수 있을 것으로 판단된다. 본 기초연구를 토대로 고장력강판 범퍼빔의 구조성능 개선을 위한 향후 연구방향에 대해 제시하였다.

• 한국제4기학회지
• /
• 제17권2호
• /
• pp.47-54
• /
• 2003

Climate of Mongolia is a driven force on natural conditions as well as socio-economic development of the country. Due to the precariousness of climate conditions and traditional economic structure, natural disasters, specially disasters of meteorological and hydrological origin, have substantial effect upon the natural resources and socio-economic sectors of Mongolia. Mongolia's climate is characterized by high variability of weather parameters, and high frequency and magnitude of extreme climate and weather events. During the last few decades, climate of the country is changing significantly under the global warning. The annual mean air temperature for the whole territory of the country has increased by $1.56^{\circ}C$ during the last 60 years,. The winter temperature has increased by $1.56^{\circ}C$. These changes in temperature are spatially variable: winter warming is more pronounced in the high mountains and wide valleys between the mountains, and less so in the steppe and Gobi regions. There is a slight trend of increased precipitation during the last 60 years. The average precipitation rate is increased during 1940-1998 by 6%. This trend is not seasonally consistent: while summer precipitation increased by 11 %, spring precipitation decreased by 17. The climate change studies in Mongolia show that climate change will have a significant impact on natural resources such as water resources, natural rangeland, land use, snow cover, permafrost as well as major economic activities of arable farming, livestock, and society (i.e. human health, living standards, etc.) of Mongolia. Therefore, in new century, sustainable development of the country is defined by mitigating and adaptation policies of climate change. The objective of the presentation is to contribute one's idea in the how to reflect the changes in climate system and weather extreme events in the country's sustainable development concept.