• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.774-776
• /
• 2007

Because many people suffer physical and mental damage from the noise of the traffic facilities including road, rail, airport, the advanced countries have conducted the researches of predicting and solving the impact of the human health exposed to traffic noise. Therefore, this study suggests the fundamental plans which can assess the health impact of traffic noise on the basis of the prediction results about the health impact of traffic noise.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.43-47
• /
• 2007

Based on experimental impact testing data, due to changing of velocity and mass of the impactor simultaneously under constant impact energy, crashworthiness of polyurethane foam has been observed. Dynamic tests were carried out in an instrumented impact-testing machine. Also, modified Sherwood-Frost model was proposed to investigate the crashworthy behaviour of rigid polyurethane foam under the condition of constant impact energy.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1996년도 제30회 학술발표회
• /
• pp.7-16
• /
• 1996

In this paper a modeling paradigm is described for answering the following questions: What would be the economic impact A, the social impact B, the demographic impact C, the land-use impact D, the environmental impact E and the user benefit F, over geographic scale G for a transport investment H at time T. The paradigm is illustrated for two ITS technologies: Advanced Transportation Management System (ATMS)and Advanced Vehicle Control Systems (AVCS).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.372.1-372
• /
• 2002

Although impact hammer is widely used as a convenient excitation tool in structural modal testing, little is known about the dynamic charateristics of its impulse mechanism. Transmission of the impulsive force to the structure depends on the dynamic properties of the impact hammer as well as the stiffness of the tip. An improved dynamic model of the impact hammer is proposed in this study with numerical simulations based on this model. (omitted)

• 한국대기환경학회지
• /
• 제15권6호
• /
• pp.827-841
• /
• 1999

The air quality simulation models in wide use for air quality impact assessmetns are reviewed. After an intensive survey and comparative study upon the environmental impact assessment reports submitted to Ministry of Environment during 1990~1998, we could identify the major common problems with the air quality impact assessment procedures. Several remedies are presented here, including use of the screening models applicable to the complex terrain.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.949-953
• /
• 1996

Force shape control for impact test is required in order to simulate dynamic reponse of structures which is subjected to impact force. In this paper, the mechanisms of contact and impact force generation are analyzed and tested with a simple test equipment. It was carried out for the pre-design of impact force reconstruction apparatus.

• Structural Engineering and Mechanics
• /
• 제60권2호
• /
• pp.225-235
• /
• 2016

Fluid impact tests on plates containing mesh reinforcement and polypropylene fibers were modeled and simulated using explicit finite element analysis software, LS-DYNA. The scabbing dimensions obtained by the experiments and the simulations were compared and crack formations were matched. The objective was to test the accuracy and fidelity of the model and to confirm that damage caused by fluid impact on the plates can be estimated with a reasonable accuracy over a wide range of impact velocity.

• 선박안전
• /
• 통권31호
• /
• pp.60-70
• /
• 2011

The slamming impact pressures at the bottom area of the Open60' are evaluated by the rules and regulations of various organizations - ISO and classification societies. The enhanced performance of the modern racing yacht in terms of speed which achieves well over 20 knots needs special consideration. The calculated design impact pressures are compared a experimental results. Severe difference can be found in these calculation results but the final conclusion shall be obtained after the scantling calculation under the evaluated design impact pressure so far.

• 전산구조공학
• /
• 제11권3호
• /
• pp.165-172
• /
• 1998

본 연구에서는 종이 충격흡수의 효율적인 기하형상이 연구되었다. 일반적으로 충격흡수재는 골판지, 스폰지, 종이, 고무등으로 제작된다. 에너지 흡수거동에 대한 종이 충격 흡수재의 보강형태, 크기., 재료 특성에 대한 영향이 ABAQUS/Explicit5.5에 의한 유한요소 해석과 미끄럼 충격시험을 통해 연구되었다. 종이 충격 흡수재의 최대 변위는 충격속도에 따라 증가하며, 내부단수에 따라 감소하였다. 충격이력 특성은 내부단수가 7단일 때 5 msee까지 급속히 변형되며, 그 이후에는 영구변형으로 존재한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.262-267
• /
• 2002

Impact behavior of polycarbonate in various defect state was investigated using an instrumented impact fester. A mettled of analyzing raw impact data was developed and successfully demonstrated the impact behavior in terms of load-displacement and energy-displacement curves. This technique was shown to be capable of separating defect, no-defect initiated fractures as well as their propagation behaviors.