• Ocean and Polar Research
• /
• v.28 no.2
• /
• pp.129-144
• /
• 2006

Small-scale effects of sand mining on macrobenthic communities have been reported previously. However, little information is available as to how dredging affects the macrobenthic community structure. The objective of this study was to determine the impacts of large-scale exhibition dredging on the macrobenthic community of Gyeonggi Bay, Korea, where sand mining has continued for 20 years. Prior to dredging, the macrobenthic species composition was similar to that of areas near the dredging site, with several common dominant species found before dredging. After dredging, the number of species, density, and diversity (H') in the experimental area (sites 0 and 1) decreased significantly, but no difference was observed at other sites. Multivariate analysis (multidimensional scaling) revealed significant differences in community structure before and after dredging. The amphipod Urothoe grimaldii japonica, which was the most dominant species at sites 0,1, and 2, decreased rapidly at sites 0 and 1 after dredging, but no difference was observed at site 2. In addition, the index of multivariate dispersion (IMD) and the relative IMD (r. IMD) were large at sites 0 and 1, suggesting that the effects of dredging were direct at site 0 and 1, but indirect at site 2. The macrobenthic communities at sites 3 and 4 were not affected by dredging, but they were affected by physical conditions and biological interactions. We suggest that benthic biotope indices such as the IMD and r.IMD may constitute a valid tool for assessing the effects of dredging on the macrobenthic community; long-term monitoring is required to verify this.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.183-184
• /
• 2010

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.437-441
• /
• 2003

In this paper, the 30 W power amplifier for an IMT-2000 repeater was developed a gain flatness and the third IMD (Intermodulation distortion) by microwave absorber. The absorption ability of the absorber is shown up to -10 dB and -4 dB at 3.6 GHz, 2.3 GHz band, respectively. The power amplifier without absorber has the gain over 57 dB, the gain flatness of $\pm$0.33 dB and the third IMD of 27 dBc at 33.3 W output. Otherwise, the power amplifier with absorber has the gain over 58 dB, the gain flatness of less than $\pm$0.9, the third IMD over 29 dBc at the same output power. As a result, the characteristic of the different type shows improvement of 1 dB in gain, 0.3 dB in gain flatness and 1.77 dBc in IMD.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.88-93
• /
• 2006

In this paper, smaller load has been used compared with the conventional Doherty amplifier and PBG structure have been employed to suppress IMD (Inter-modulation Distortion) and improve PAE (Power Added Efficiency). And The PBG structure has been employed on the output macthing network of Doherty amplifier. The proposed power amplifier has been improved more the IMD3 by 5.5 dBc, and the average PAE by $5\%,$ at peak output power, $18\%$ at 8dB back-off point respectively than the conventional Doherty power amplifier.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.129-133
• /
• 2006

In spite of the advantage of simple circuit, small size, and low price, predistortered power amplifier does not satisfy the IMD specification at low power range because of an IMD hump characteristic. To reduce the performance degradation by IMD hump, the method which is to control the operating point of amplifier according to its output power is presented. This method using envelope detection bias control is applied to the implemented class AB predistortered 16 W power amplifier. The measured result shows 10 dB improvement of $3^{rd}$ IMD performance in wide dynamic range of output power.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.124-128
• /
• 2006

In this paper, Compact Microstrip Resonant Cell(CMRC)s have been employed to suppress IMD(Intermodulation Distortion) of the 3-Way Doherty amplifier. This method can not only improve the linearity and the efficiency but also be simpler, smaller and more inexpensive than existing linearity methods; (for example harmonic feedback, back off, feed-forward, predistortion and so on) Also, using only one divider reduces the size of the proposed 3-Way Doherty amplifier. As a result, the IMD3 and the PAE have been improved by 4.5 dB and by $9.2\%$, respectively, using the proposed Doherty amplifier with CMRC.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.62-69
• /
• 2008

This paper proposes linearization technique that the linearity is improved by controlling IMD between the drive stage and the output stage. From the experimental results of W-CDMA 4FA input signal, this amplifier has ACLR of -48dBc@5MHz offset at 50W average power. Proposed linearization technique provides predistortion effect for using drive amplifier without additional circuit, which is the significant in this paper that it makes up for the weak point of analog predistortion method and feedforward method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.7 s.361
• /
• pp.12-16
• /
• 2007

In this paper, The 3rd-IMD of class-F power amplifier is improved using CMRC structure in order to remove the parasitic End harmonic at the output load of class-F power amplifier. The total size is very small more than class-F power amplifier using PBG. (Photonicband Gap) structure during improved 3rd-IMD characteristic performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.707-713
• /
• 2001

As the integrated circuit device shrinks to smaller dimensions, chemical mechanical polishing (CMP) process was requirdfo the global planarization of inter-metal dielectric (IMD) layer with free-defect. However, as the IMD layer gest thinner, micro-scratches are becoming as major defects. However, as the IMD layer gets thinner, micro-scratches are becoming as major defects. Micro-scratches are generated by agglomerated slurry, solidified and attached slurry in pipe line of slurry supply system. To prevent agglomerated slurry particle from inflow, we installed 0.5${\mu}{\textrm}{m}$ point of use (POU) filter, which is depth-type filter and has 80% filtering efficiency for the 1.0${\mu}{\textrm}{m}$ size particle. In this paper, we studied the relationship between defect generation and polished wafer counts to understand the exact efficiency fo the slurry filteration, and to find out the appropriate pad usage. Our experimental results showed that it sis impossible to prevent defect-causing particles perfectly through the depth-type filter. Thus, we suggest that it is necessary to optimize the slurry flow rate, and to install the high spray bar of de-ionized water (DIW) with high pressure, to overcome the weak-point of depth type filter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12A
• /
• pp.1019-1024
• /
• 2003

In the thesis, we propose a new type of the predistortion linearizer using frequency multiplier The linearizer utilizing the 2nd and 3th harmonic used the individual control of the 3rd and 5th order intermodulation distortion(IMD) component. This structure is composed of wilkinson power combiner for combine and isolation of output signal, 3rd order IMD product controller using doubler and 5th order IMD product controller using tripler. The proposed predistortion linearizer controlled by individual order is obtained for about -16 dBc and 18 dBc of 3rd order and 5th order IMD components, respectively, over the frequency band 870 MHz to 880 MHz at the output power of 34 dBm/tone.