• KSBB Journal
• /
• v.30 no.6
• /
• pp.307-312
• /
• 2015

Transgenic rice cells using RAmy3D promoter can provide high productivity, and the production of recombinant protein is induced by sugar starvation. In this system, productivity was reduced during the scale-up processes. To ensure the influences of shear stress and oxygen transfer rate, working volume and mixing performances were investigated under various agitation speeds and working volumes. In addition, inoculation methods including suspended cells and filtered cells were compared. Working volumes and shaking speeds were 300, 450 mL and 80, 120 rpm, respectively. Hydrodynamic environment of each condition was measured numerically like mixing time and $k_La$. Good mixing performance and high shear stress were measured at high agitation speed and low volume. The highest level of hCTLA4Ig was 30.7 mg/L at 120 rpm, 300 mL. When conditioned medium was used for inoculation, increased cell growth was noticed during the day 0~4 and decreased slower than filtered cells. Compared with filtered cells, the maximum hCTLA4Ig level reached 37.8 mg/L at 120 rpm, 300 mL and lower protease activity level was observed. In conclusion mixing performance is critical factor for productivity and conditioned medium can have a positive effect on damaged cells caused by hydrodynamic shear stress.

• BMB Reports
• /
• v.43 no.8
• /
• pp.561-566
• /
• 2010

Though protein transduction domains (PTDs) are well known for the delivery of exogenous therapeutic proteins into living cells, the overall low efficiency of transduction is a serious obstacle. We investigated the effect of bog blueberry anthocyanins (BBA) on protein transduction efficiency and found that BBA enhanced the transduction efficiencies of Tat-SOD fusion protein into HeLa cells and mice skin. The enzymatic activities in the cells and skin tissue in the presence of BBA were markedly increased compared to controls. Further, BBA did not demonstrate any cell toxicity at various concentrations. Although the mechanism is not fully understood, we suggest that BBA might alter the conformation of the membrane, which would indicate that BBA can be used as a protein transduction enhancer for the efficient delivery of therapeutic proteins for a variety of disorders.

• Korean Journal of Microbiology
• /
• v.32 no.3
• /
• pp.186-191
• /
• 1994

The origin of the leading strand replication (ori) and of lagging strand replication (M-O) of R-plasmid pSBK203 was identified and its base sequence was determined. About 50 bp of ori sequence residues overlapped with the structural gene of rep. Sequence comparison reveals that pSBK-ori shares obvious identities with those of pT181 family and consists of two regions, one is conserved and the other is variable region. Of two palindrome sequence located one after another in upstream region of rep gene, palA' instead of palA which shares sequence homology with diverse family of plasmids such as pOX6, pC194, and pE194 seems to act as a signal for conversion of primarily replicated ssDNA to dsDNA (minus origin (M-O)).

• Research in Community and Public Health Nursing
• /
• v.14 no.2
• /
• pp.253-262
• /
• 2003

Purpose: This study was carried out to identify factors influencing osteoporosis in women at pre- and post-menopausal state. Methods: The subjects of this study were 52 pre-menopausal and 125 post-menopausal women who were assessed of bone density in one general hospital. The data were collected through review of clinical records and telephone interviews using a questionnaire. Results: In the pre-menopausal women, the factors influencing osteoporosis were regular exercise (protective factor) and age (risk factor). Regression analysis showed that the factors attributable to osteoporosis included educational level, weight, age and number of pregnancy, accounted for 41.89% of the total variance. In the post-menopausal women. the factors influencing osteoporosis were age (risk factor), low educational level (risk factor), low economical state (risk factor), high parity (risk factor), and intake of coffee (protective factor). Regression analysis also showed that factors attributable to their osteoporosis included age, educational level, number of delivery, intake of the coffee, regular exercise, number of pregnancy and duration of oral pill intake, accounted for 37.41 % of the total variance. Conclusion: In pre-menopausal women, regular exercise was one of the most powerful determinant of their bone mass. Therefore, it is necessary to participate in a regular exercise program to maintain peak bone mass density prior to the onset of menopause. In post-menopausal women, increased age was the most influencing factor of their bone mass. Therefore, it is essential to establish early diagnosis and management of osteoporosis after menopause.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.3
• /
• pp.385-393
• /
• 2006

In Korea, the effective utilization of wod structure is encour aged to preserve natural resources and the global environment.ote demand for wod. The efective combination of structural la minated timber and other materials is expected to extend the potential of building structures. This research examines the moment resis tance-type jointing method using structural laminated timber and H-section stel aiming at development of the two-direction frame for lar ge 9 mm and 12 mm) of the H section. Therefore, we conducted the experiment with bending test of the joints to investigate the s tifnes, strength, strain distributions of laminated timber an d of the flange of the H section, and failure paterns. As shown in the results, t he joints with a flange thicknes of 9 mm and 12 m have superi or strength with a flange thicknes of 9 mm and 12 mm were very large, whic h confirmed the high level of energy absorption of such structure s.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.6
• /
• pp.1-12
• /
• 2006

Remote sensing cannot provide a direct measurement of vegetation index (VI) but it can provide a reasonably good estimate of vegetation index, defined as the ratio of satellite bands. The monitoring of vegetation in nearby urban regions is made difficult by the low spatial resolution and temporal resolution image captures. In this study, enhancing spatial resolution method is adapted as to improve a low spatial resolution. Recent studies have successfully estimated normalized difference vegetation index (NDVI) using improved resolution method such as from the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard EOS Terra satellite. Image enhancing spatial resolution is an important tool in remote sensing, as many Earth observation satellites provide both high-resolution and low-resolution multi-spectral images. Examples of enhancement of a MODIS multi-spectral image and a MODIS NDVI image of Cheongju using a Landsat TM high-resolution multi-spectral image are presented. The results are compared with that of the IHS technique is presented for enhancing spatial resolution of multi-spectral bands using a higher resolution data set. To provide a continuous monitoring capability for NDVI, in situ measurements of NDVI from paddy field was carried out in 2004 for comparison with remotely sensed MODIS data. We compare and discuss NDVI estimates from MODIS sensors and in-situ spectroradiometer data over Ochang plain region. These results indicate that the MODIS NDVI is underestimated by approximately 50%.

• Tuberculosis and Respiratory Diseases
• /
• v.69 no.5
• /
• pp.375-380
• /
• 2010

Lymphoid interstitial pneumonia (LIP) is a rare benign lymphoproliferative interstitial lung disease. LIP has been associated with autoimmune disorders, HIV, viral infections, and so on. Once underlying systemic diseases have been excluded, a diagnosis of idiopathic LIP can be made. Although 6 cases of pathologically confirmed LIP have occurred in Korea, thus far none has been associated with primary Sjogren's syndrome. A 44-year-old man was admitted to hospital due to a dry cough and dypsnea on exertion that had been ongoing for 2 months. A chest radiography showed multiple and variable-sized cystic lesions, on both lungs and both interstitial infiltration and consolidation in both lower lung fields. Tests for autoantibody showed positive results of anti-nuclear antibody and anti-Ro/La antibody. The patient underwent a video assisted thoracoscopic surgery biopsy and pathologically confirmed LIP. We report the first known case of LIP-associated with primary Sjogren's syndrome in Korea.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.330-330
• /
• 2010

이동통신 시스템의 소형화, 경량화, 다기능화 추세에 따라 이동통신 부품도 단위 부피당 소자의 집적도를 증가시키기 위하여 고집적화 추세로 급진전되고 있다. 이에 따라 세라믹 공정 기술도 고집적 추세로 다층화 되고 있어 수동소자의 내장화에 대한 필요성이 증대되고 있다. 이를 위하여 다양한 유전율 대역의 이종소재간 접합을 시도하지만 de-lamination, 내부 crack 등의 결함들이 발생하므로 열팽창계수 조절이 용이한 동종의 글라스를 사용하는 것이 유용하다. 본 연구에서는 공통의 글라스를 개발한 후 다양한 필러들을 혼합하여 mm파 대역에서 다양한 유전율을 갖는 LTCC 소재를 개발함으로써, 수동소자의 내장화에 따른 이종접합시의 매칭성을 극대화하고자 하였다. 이를 위하여 CaO-$Al_2O_3-SiO_2-B_2O_3$계 공통글라스에 $CaZrO_3$, $1.3MgTiO_3$, $2La_2O_3TiO_2$ 필러를 혼합하여 소결체의 미세구조, 유전특성 및 열기계적 특성을 고찰하였다. 이때 유전율 6에서 20에 이르는 저손실 소재를 개발할 수 있었다.

• Journal of Periodontal and Implant Science
• /
• v.24 no.3
• /
• pp.541-560
• /
• 1994

The present study was performed to evaluate the relationship between the serotype or the genotype of Actnobacillus actinomycetemcomitans (A. a.) and the severity of periodontal disease. Total 64 A. a. clinical isolates were sampled from 46 sites of 20 subjects classified into the group I (1 periodontally healthy subject, 2 gingivitis patients, 5 ealry adult periodontitis patients), group II (3 moderatelly adult periodontitis patients) and group III (1 advanced adult periodontitis patient, 8 RPP patients). Southern bolt hybridization (fingerprinting) patterns of the five reference strains, A. a. strain ATCC 29523 (serotype a), ATCC 29522 (Serotype b), ATCC 43719 (serotype c), IDH 781 (serotype d) and IDH 1705 (serotype e), were used as the five basic genotypic patterns (A, B, C, D, E). NT type was designated as one which did dnot represent any of those five basic types. The serotypes were determined by ELISA technique with the serum samples from pre-immunized rabbit. Based on subject-based analysis, it was noted that genotypes A and C, NT, and B, D, E were significantly related to the disease groups I, II, and III, respectively. It was also noted that both the serotypes a and c were significantly related to the disease group I and II, while serotypes were significantly related bm), and serotypes b and nd were frequently found in sites with severe attachment loss (LA>6mm). The results indicated that the significant relationship can be delineated beteen the genotypes and the serotypes of Acinobacillus actinomycetemcomitans and the periodontal disease severity. The results also indicated that genotyping can provide more detailed information on its relationship with the disease severity based on both the patient-based and the site-based analyses.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.743-751
• /
• 2000

Because welding residual stress is formidable result in electric resistance spot welding process, and it detrimentally affect to fatigue crack initiation and growth at nugget edge of spot welded la p joints, it should be considered in fatigue analysis. Thus, accurate prediction of residual stress is very important. In this study, nonlinear finite element analysis on welding residual stress generated in process of the spot welding was conducted, and their results were compared with experimental data measured by X-ray diffraction method. By using their results, the maximum principal stress considered welding residual stress at nugget edge of the spot welded lap joint subjected to tension-shear load was calculated by superposition method. And, the $\Delta$P- $N_f$ relations obtained through fatigue, tests on the IB-type spot welded lap joints was systematically rearranged with the maximum principal stress considered welding residual stress. From the results, it was found th2at fatigue strength of the IB-type spot welded lap joints could be systematically and more reasonably rearranged by the maximum principal stress($\sigma$1max-res considered welding residual stress at nugget edge of the spot welding point.