• 제목/요약/키워드: IEEE 802.16m,

검색결과 77건 처리시간 0.036초

다중 셀 환경에서 하향 링크 OFDMA 중계 네트워크를 위한 전력 및 부반송파 할당 기법 (Joint Subcarrier and Power Allocation for a Downlink OFDMA Relay Network in Multi-Cell Environments)

  • 최동욱;이재홍
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 2009년도 추계학술대회
    • /
    • pp.15-18
    • /
    • 2009
  • 현재 ITU (International Telecommunications Union)에서는 4세대 무선 광대역 표준에 대한 제안을 모색하고 있다. 4세대 표준의 유력한 후보군인 LTE-Advanced와 IEEE 802.16m은 고속이용 환경에서도 안정적으로 통신할 수 있도록 상형링크 및 하향링크에 변조기법으로 OFDMA을 사용하고 있다. 또한 셀(Cell) 변두리 지역에서 통신용량을 늘리기 위에 중계단말기를 사용하려고 한다. 이에 따라서 OFDMA 중계 네트워크에 대한 관심이 높아자고 있다. 이에 본 논문은 단일 셀 환경에서 확장된 다중 셀 환경의 OFDMA 중계 네트워크에서 부반송파 및 전력 할당 기법용 제안한다. 제안된 기법에서는 채널정보를 인접 셀과 공유하여 셀 간 간섭을 줄이고 부반송파와 전력을 적응적으로 분배함으로서 각 수신단말기의 최소통신용량을 확보하고 네트워크 지속시간을 늘리는 것을 목적으로 한다.

  • PDF

Crest Factor 감소를 위한 효율적인 피크 윈도윙 기법 (Efficient Peak Windowing Techniques for Crest Factor Reduction)

  • 유병욱;황유선;;이규하;이충용
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 2011년도 하계학술대회
    • /
    • pp.462-465
    • /
    • 2011
  • 본 논문에서는 다중 반송파, 특히 OFDM 시스템의 PAPR 을 감소시킬 수 있는 CFR 알고리즘을 다룬다. 기존의 피크 윈도윙 기법이 윈도우 길이 내에 피크들이 여러 개 있을 경우, 과도 clipping 으로 인하여 성능이 열화되는 현상을 개선하기 위하여 포락선 기반 피크 윈도윙 기법을 적용한다. 뿐만 아니라, 피크 윈도윙이 가지고 있는 EVM 열화를 완화하기 위하여 기존의 단순 clipping 기법과 혼합하여 시스템에서 요구하는 EVM 성능뿐 아니라 ACLR 성능까지도 만족하도록 한다. MATLAB 을 이용하여 알고리즘을 검증하고, 하드웨어 구현을 위하여 Xilinx Virtex5 를 이용하여 검증하여 제안하는 기법의 복잡도는 높지만 EVM 과 ACLR 성능이 우수함을 알 수 있다. 효율적인 주파수 이용과 수신 성능 측면에서 우수한 성능을 보인다. 따라서 DVB-T 나 LTE, IEEE 802.16m 등의 차세대 방송 및 통신의 전송에 이용되는 OFDM 신호의 PAPR 을 효과적으로 줄일 수 있는 기법으로 적용될 수 있다.

  • PDF

A Multi-mode LDPC Decoder for IEEE 802.16e Mobile WiMAX

  • Shin, Kyung-Wook;Kim, Hae-Ju
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제12권1호
    • /
    • pp.24-33
    • /
    • 2012
  • This paper describes a multi-mode LDPC decoder which supports 19 block lengths and 6 code rates of Quasi-Cyclic LDPC code for Mobile WiMAX system. To achieve an efficient implementation of 114 operation modes, some design optimizations are considered including block-serial layered decoding scheme, a memory reduction technique based on the min-sum decoding algorithm and a novel method for generating the cyclic shift values of parity check matrix. From fixed-point simulations, decoding performance and optimal hardware parameters are analyzed. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a $0.18-{\mu}m$ CMOS cell library. It has 380,000 gates and 52,992 bits RAM, and the estimated throughput is about 164 ~ 222 Mbps at 56 MHz@1.8 V.

IEEE 802.16e 기반 와이브로 기지국용 복조기 설계 (Implementation of the WiBro RAS(Radio Access Station) Demodulator)

  • 김경민;김지호;김재석
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.643-644
    • /
    • 2006
  • In this paper, WiBro system which is one of the mobile wireless metropolitan area network systems is presented. WiBro is an OFDMA system which has a sub-channelization process unlike conventional OFDM systems. The sub-channelization is the time consuming processing, so a time-efficient hardware architecture is needed. WiBro RAS(Radio Access Station) demodulator is designed with Verilog HDL, and the gate count is 81k using the $0.18{\mu}m$ processing.

  • PDF

광대역의 우수한 이득평탄도를 갖는 V-밴드 전력증폭기 MMIC (V-Band Power Amplifier MMIC with Excellent Gain-Flatness)

  • 장우진;지홍구;임종원;안호균;김해천;오승엽
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.623-624
    • /
    • 2006
  • In this paper, we introduce the design and fabrication of V-band power amplifier MMIC with excellent gain-flatness for IEEE 802.15.3c WPAN system. The V-band power amplifier was designed using ETRI' $0.12{\mu}m$ PHEMT process. The PHEMT shows a peak transconductance ($G_{m,peak}$) of 500 mS/mm, a threshold voltage of -1.2 V, and a drain saturation current of 49 mA for 2 fingers and $100{\mu}m$ total gate width (2f100) at $V_{ds}$=2 V. The RF characteristics of the PHEMT show a cutoff frequency, $f_T$, of 97 GHz, and a maximum oscillation frequency, $f_{max}$, of 166 GHz. The gains of the each stages of the amplifier were modified to have broadband characteristics of input/output matching for first and fourth stages and get more gains of edge regions of operating frequency range for second and third stages in order to make the gain-flatness of the amplifier excellently for wide band. The performances of the fabricated 60 GHz power amplifier MMIC are operating frequency of $56.25{\sim}62.25\;GHz$, bandwidth of 6 GHz, small signal gain ($S_{21}$) of $16.5{\sim}17.2\;dB$, gain flatness of 0.7 dB, an input reflection coefficient ($S_{11}$) of $-16{\sim}-9\;dB$, output reflection coefficient ($S_{22}$) of $-16{\sim}-4\;dB$ and output power ($P_{out}$) of 13 dBm. The chip size of the amplifier MMIC was $3.7{\times}1.4mm^2$.

  • PDF

셀룰러 시스템의 섹터 간 협력 전송 시 최적의 안테나 틸팅 각도 결정 방식 (On Optimal Antenna Tilting Angles for Cooperative Transmissions Between Sectors in Cellular Systems)

  • 고진석;김재원;박종현;성원진
    • 대한전자공학회논문지TC
    • /
    • 제47권7호
    • /
    • pp.29-35
    • /
    • 2010
  • 최근 3GPP LTE-Advanced 및 IEEE 802.16m과 같은 차세대 통신 규격에서 섹터 간 협력 전송이 중요 연구주제가 되었고, 그에 따라 기존 비협력 전송에서와 마찬가지로 섹터 간 협력 전송 시에도 최적의 안테나 틸팅 각도를 결정하는 방식의 필요성이 대두되고 있다. 본 논문에서는 섹터 간 협력 전송 및 비협력 전송 시 최적의 안테나 틸팅 각도를 결정하는 방식들을 제안한다. 제안하는 방식은 섹터 반경 내에 동일하게 분포하는 사용자의 전송률 평균인 셀 평균 전송률 또는 셀 평균 로그 전송률을 최대화하는 목적함수를 활용한다. 또한 이론적 용량인 Shannon 전송률 대신 실제 셀룰러 시스템에서 활용되는 AMC (adaptive modulation and coding) 방식을 고려한 셀 평균 AMC 전송률을 최대화하는 목적함수도 함께 활용한다. 협력 및 비협력 전송 시 셀 평균 전송률을 목적함수로 고려하는 경우에는 시스템 전송 효율성을 최대화 하며, 셀 평균 로그 전송률 및 AMC를 목적함수로 활용하는 경우에는 특히 셀 경계 사용자의 전송 효율성 증대를 크게 반영하는 최적의 안테나 틸팅 각도를 결정하는 방식을 제시한다.

CDMA 및 OFDM 기반 무선측위의 다중경로오차 특성 비교분석 (A Comparison of the Multipath Error Property In Wireless Location of CDMA and OFDM)

  • 방혜정;이장규;지규인;김진원;정희;현문필
    • 제어로봇시스템학회논문지
    • /
    • 제12권10호
    • /
    • pp.989-995
    • /
    • 2006
  • This paper shows that the OFDM(Orthogonal Frequency Division Multiplex) system is robust to multipath than CDMA (Code Division Multiple Access) system and it has a strong possibility to be utilized as a supplementing wireless location system for the forthcoming portable internet network. The OFDM system based on IEEE 802.16e is a wireless TDD (Time Division Duplex) OFDMA (Orthogonal Frequency Division Multiple Access) system providing portable internet services in 2.3 GHz frequency band and is scheduled in service in Korea starting in 2006. In this paper, multipath error is calculated using a two-ray model and compared with that of a CDMA system which is following IS-95. The OFDM system shows a maximum multipath error of 3 m while a CDMA system shows a maximum multipath error of 61 m. For this simulation, an early-late technique is used. This technique is usually used to match synchronization of signal in DLL(Delay Lock Loop).

An IBC and Certificate Based Hybrid Approach to WiMAX Security

  • Rodoper, Mete;Trappe, Wade;Jung, Edward Tae-Chul
    • Journal of Communications and Networks
    • /
    • 제11권6호
    • /
    • pp.615-625
    • /
    • 2009
  • Worldwide inter-operability for microwave access (WiMAX) is a promising technology that provides high data throughput with low delays for various user types and modes of operation. While much research had been conducted on physical and MAC layers, little attention has been paid to a comprehensive and efficient security solution for WiMAX. We propose a hybrid security solution combining identity-based cryptography (IBC) and certificate based approaches. We provide detailed message exchange steps in order to achieve a complete security that addresses the various kind of threats identified in previous research. While attaining this goal, efficient fusion of both techniques resulted in a 53% bandwidth improvement compared to the standard's approach, PKMv2. Also, in this hybrid approach, we have clarified the key revocation procedures and key lifetimes. Consequently, to the best of knowledge our approach is the first work that unites the advantages of both techniques for improved security while maintaining the low overhead forWiMAX.

A Low-Crosstalk Design of 1.25 Gbps Optical Triplexer Module for FTTH Systems

  • Kim, Sung-Il;Park, Sun-Tak;Moon, Jong-Tae;Lee, Hai-Young
    • ETRI Journal
    • /
    • 제28권1호
    • /
    • pp.9-16
    • /
    • 2006
  • In this paper, we analyzed and measured the electrical crosstalk characteristics of a 1.25 Gbps triplexer module for Ethernet passive optical networks to realize fiber-tothe-home services. Electrical crosstalk characteristic of the 1.25 Gbps optical triplexer module on a resistive silicon substrate should be more serious than on a dielectric substrate. Consequently, using the finite element method, we analyze the electrical crosstalk phenomena and propose a silicon substrate structure with a dummy ground line that is the simplest low-crosstalk layout configuration in the 1.25 Gbps optical triplexer module. The triplexer module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and an analog photodetector as a cable television signal receiver. According to IEEE 802.3ah and ITU-T G.983.3, the digital receiver and analog receiver sensitivities have to meet -24 dBm at $BER=10^{-12}$ and -7.7 dBm at 44 dB SNR. The electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the dummy line with $100\;{\mu}m$ space from the signal lines and 4 mm separations among the devices satisfies the electrical crosstalk level compared to a simple structure. This proposed structure can be easily implemented with design convenience and greatly reduce the silicon substrate size by about 50 %.

  • PDF

IMT Advanced 시스템에서 예측 스케줄링을 통한 핸드오버시 모바일 QoS 보존 방법 (Preserving Mobile QoS during Handover via Predictive Scheduling in IMT Advanced System)

  • 니라지 포��;이병섭
    • 한국항행학회논문지
    • /
    • 제14권6호
    • /
    • pp.865-873
    • /
    • 2010
  • 본 논문에서의 새로운 스케줄링은 모바일 간에 실시간으로 요구하는 모든 최소 가용 대역폭, 최대 지연 시간 그리고 다른 부수적인 조건들에 대해 QoS를 보장하는 핸드오버 요청들을 제공하기 위해 제안되었다. 입력으로는 모바일 스테이션이 서비스지역 이동간에서 발생하는 핸드오버 시간에 대한 예측이 필요하다. QoS와 핸드오버 시간을 알게 된 후, 목적지 기지국은 새로운 요청을 위한 핸드오버에 우선순위를 둔다. 그리고 이전의 리소스는 실제로 핸드오버 동안 사용할 수 있는 기회를 조금 더 가지게 된다.