• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.216-219
• /
• 2003

In this paper, we present performance analysis of an IEEE P802.15.3a high rate wireless personal area network transceiver. This physical layer standard uses QOSK as its sub-channel modulation scheme and orthogonal frequency domain modulation (OFDM) for sub-bands. OFDM is used for each sub-band so that multi-path effects are absorbed by equalizer and guard, and fading can be approximately modeled as additive white Gaussian noise. In multi-band ultra-wideband system, DAC quantization error is important noise source since high resolution conversion cannot be used due to high power consumption. Simulation result shows that, to get 640-Mbps throughput, at least 5-bits precision is necessary to maintain bit-error rate under 10$\^$-2/, which can be lowered, with channel coding, to 10$\^$-6/ that is the bit-error rate required by IEEE 802.15 upper protocol layer, in 4-meter LOS fading channel.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.65-70
• /
• 2024

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN (Wireless Smart Utility Network) Alliance proposed a Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e Receiver Initiated Transmission(RIT) Mode Media Access Control (MAC) in terms of throughput and latency, and looks at considerations for efficient operation. RIT mode shows that as the check interval becomes longer, delay time and throughput decrease. It was shown that as the traffic load increases, if the RIT check interval is shortened, the delay time can be shortened and throughput can be increased. RIT mode has the advantage of low power consumption and has neutral characteristics between IEEE802.15.4 and CSL mode in terms of delay time and throughput.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.2
• /
• pp.82-94
• /
• 2007

Wireless sensor networking technology is one of the basic infrastructures for ubiquitous environment. It enables us to gather various sensory data such as temperature, humidity, gas leakage, and speed from the remote sensor devices. To support these networking functions, IEEE WPAN working group makes standards for PHY and MAC, while ZigBee Alliance defines the standards for the network, security, and applications. The low-rate WPAN was emerged to have the characteristics of network resilience, low cost, and low power consumption. It has a broad range of applications including, but not limit to industrial control and monitoring, home automation, disaster forecast and monitoring, health care. In order to provide more intelligent and robust services, users want voice-based solutions to accommodate to low-rate WPAN. In this paper, we have evaluated voice quality of an IEEE 802.15.4 standard compliant voice node. Specifically, it includes the design of a voice node and experiments based on the prediction of voice quality using the E-model suggested by ITU-T G.107, and the network communication mechanisms considering beacon-enabled and nonbeacon-enabled networks for real-time voice communications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.820-827
• /
• 2010

In these days, video applications for special purposes such as video conference systems among multiple users and video surveillance systems require multiple video connections and QoS guarantee. The video systems employ IEEE 802.11 Wireless LAN devices to support broadband wireless interfaces and easy internet accesses for cheaper prices. However, according to the current IEEE 802.11e HCCA standard, if more than three video sessions are established in WSTA services, some of them must share the TXOP because the available number of TSIDs for video transmission is two. In order to resolve the problem, we devised a method which can establish up to 15 video sessions by slightly modifying the frame structure while maintaining the compatibility with current standard. Our method is implemented on the NCTUns 4.0 network simulator, and evaluated not only numerically in terms of throughput, delay, and PSNR, but also experimentally in the sense of real video clips that are used as input to our simulation. The results showed that our method sufficiently guarantees the transmission bandwidth requested by each video session.

• International Journal of Contents
• /
• v.15 no.4
• /
• pp.27-35
• /
• 2019

In this paper, we propose an advanced Minimum Mean Square Error (MMSE) channel estimation method for IEEE 802.11p/Wireless Access in Vehicular Environments (WAVE) systems. To improve the performance of MMSE method, we apply the Weighted Sum using Update Matrix (WSUM) scheme to the step of calculating the instantaneously estimated channel and then, a time domain selectively averaging method is applied after the WSUM scheme. Based on that, the accuracy of instantaneously estimated channel increases and then, the accuracy of auto covariance matrix also increases. Consequently, we can achieve the performance gain over the conventional MMSE method. Through simulations based on the IEEE 802.11p standard, it is confirmed that the proposed scheme can outperform the existing channel estimation schemes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.23-28
• /
• 2021

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN(Wireless Smart Utility Network) Alliance proposed Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e CSL(Coordinated Sampled Listening) Mode MAC(Media Access Control) in terms of latency and looks at considerations for efficient operation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.53-65
• /
• 2012

Recently wireless intra-vehicle communication has received a great interest from the automotive industry and ultra wideband (UWB) technology is considered as one of the potential candidate for this system. Many research works have been done on the measurement and modeling of intra-vehicle communication channel. However, very little work has been reported for the performance analysis of various PHY layer methods under the intra-vehicle communication environment. This paper is to study IEEE 802.15.4a standard in intra-vehicle channel and to evaluate its performance. Channel model in chassis and engine compartment is considered for evaluation. Through simulation BER performance of system with different receiver structures is analyzed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.32-40
• /
• 2016

IEEE 802.15.4 is the one of the protocols for radio communication in a personal area network. Because of low cost and low power communication for IoT communication, it requires the highest optimization level in the implementation. Recently, the studies of location aware algorithm based on IEEE802.15.4 standard has been achieved. Location estimation is performed basically in equal consideration of reference node information and blind node information. However, an error is not calculated in this algorithm despite the fact that the coordinates of the estimated location of the blind node include an error. In this paper, we enhanced a conventual maximum likelihood estimation using weighted coefficient and implement the hardwired location aware engine for small code size and low power consumption. On the field test using test-beds, the suggested hardware based location awareness method results better accuracy by 10 percents and reduces both calculation and memory access by 30 percents, which improves the systems power consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1925-1932
• /
• 2016

One of the major challenges in the design of wireless sensor network (WSN) is to reduce the energy consumption of sensor nodes for prolonging the network lifetime. In the sensor network, communication is the most energy consuming event. Therefore, most of the energy saving techniques conserve energy by adjusting different parameters of the trans-receiver. Among them, one of the promising methods is the transmission power control (TPC). In this paper, we investigated the effects of the link quality based TPC scheme employed to the IEEE 802.15.4 standard for energy saving. The simulation results demonstrated that the link quality based TPC scheme works effectively in conserving energy as compared to the conventional IEEE 802.15.4.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.176-180
• /
• 2009

This paper investigates protocol architecture for a web-sensor gateway interconnecting internet and wireless sensor network, in which Zigbee sensors are connected over the IEEE802.15.4 communication protocol standard. The web-sensor gateway is to deliver data between TCP/IP and Zigbee/IEEE802.15.4 protocols, transparently. Since the gateway provides a means to remotely control and aggregate sensor data over the internet, it needs to be designed in the view point of users and in their convenience. In accordance, the common gateway interface technology satisfying users on the web browser to efficiently manage and query the sensors in the wireless sensor networks, ubiquitously, is also introduced. Finally, a simulation prototype for the web-sensor gateway is proposed and verified using OPNET simulation tool.