• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.501-509
• /
• 2012

This paper proposes a joint timing synchronization, channel estimation, and data detection for the impulse radio ultra-wideband systems. The proposed timing synchronizer consists of coarse and fine timing estimation. The synchronizer discovers synchronization points in two stages and performs adaptive threshold based on the maximum pulse averaging and maximum (MAX-PA) method for more precise synchronization. Then, iterative channel estimation is performed based on the discovered synchronization points, and data are detected using the selective rake (S-RAKE) detector employing maximal ratio combining. The proposed synchronizer produces two signals-the start signal for channel estimation and the start signal for start frame delimiter (SFD) detection that detects the packet synchronization signal. With the proposed synchronization, channel estimation, and SFD detection, an S-RAKE receiver with binary pulse position modulation binary phase-shift keying modulation was constructed. In addition, an IEEE 802.15.4a channel model was used for performance comparison. The comparison results show that the constructed receiver yields high performance close to perfect synchronization.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.50-54
• /
• 2010

A Container Security Device (CSD) which is different existing RFID Tag strengthens the physical security as mounted inside the container and the information security as encrypts doubly a data. CSD must use the resources efficiently in order to operate with the battery. Therefore, it needs low-power mechanism which repeats the sleep period and channel scan period. However, by adjusting these periods, the trade-off occurs between energy efficiency and network connectivity. In this paper, we implement low-power CSD and resolve this problem by adjusting beacon period and channel scan time. As a result, We guarantee the network connectivity 95% or more and maximum life up to 16 days using common AA batteries.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.8
• /
• pp.735-742
• /
• 2016

The Low-Rate WPAN is a short range wireless networking technology characterized by low-rate, low-power, low complexity and low-cost. The LR-WPAN controls wireless channel access among network devices based on the contention-based CSMA/CA algorithm. Therefore, frame collisions may take place at any time, leading to the severe degradation of network performance. This paper proposes a new algorithm that changes back-off periods adaptively in the CSMA/CA process depending on network conditions, resulting in the reduction of frame collisions. Throughout extensive simulations, it turns out that varying the back-off periods dynamically shows better performance than maintaining the fixed back-off periods.

• Journal of Sensor Science and Technology
• /
• v.17 no.3
• /
• pp.168-177
• /
• 2008

An indoor environmental monitoring system using IEEE 802.15.4 based wireless sensor network is proposed to monitor the amount of pollutant entering to the room from outside and also the amount of pollutant that is generated in indoor by the building materials itself or human activities. Small-size, low-power wireless sensor node and low power electrochemical sensor board is designed to measure the condition of indoor environment in buildings such as home, offices, commercial premises and schools. In this paper, two query models, the broadcasting query protocol and flooding query protocol, were designed and programmed as a query-based routing protocol in wireless sensor network for an environment monitoring system. The flooding query routing protocol in environment monitoring is very effective as a power saving routing protocol and reliable data transmission between sensor nodes.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.2
• /
• pp.104-112
• /
• 2006

ZigBee is the emerging industrial standard for ad hoc networks based on IEEE 802.15.4. It is used for low data rate and low power wireless network applications. Expected applications of ZigBee include wireless sensor networks for remote monitoring, home control, and industrial automation. Since one of the most important design goals of ZigBee is to reduce the installation and running costs, the ZigBee stack is embedded in the cheap and small micro-controller unit. The hierarchical routing algorithm is used for ZigBee end devices which have very limited resources. Using the block addressing scheme, end devices can send data to the destination without a routing table. However, hierarchical routing has the problem that the packets follow the tree hierarchy to the destination even if the destination is located nearby. In this paper, we propose a scheme to improve the hierarchical routing algorithm in ZigBee networks by employing the neighbor table that is originally used together with the routing table. We suggest selecting the neighbor node that has the minimum remaining hops to the destination as the next hop node. Simulation result shows that the proposed scheme saves more than 30% of the hop counts compared with the original hierarchical routing.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.269-274
• /
• 2013

In this paper, we propose the design and implementation method of picking system using zigbee wireless communication in order to solve problems of the conventional picking system which has expensive labors and maintenance costs. We use multi router based star-tree topology as a default routing topology to provide the reliable data transmission and define the method of ID configuration and data transmission. We confirm that successful data transmission ratio of multi router based picking system is maximum 20% higher than that of single router based picking system.

• International journal of advanced smart convergence
• /
• v.1 no.2
• /
• pp.1-11
• /
• 2012

IP-based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health care, home automation, environmental monitoring, industrial control, vehicle telematics, and agricultural monitoring. In all these applications, a fundamental issue is the mobility in the sensor network, particularly with regards to energy efficiency. Because of the energy inefficiency of network-based mobility management protocols, they can be supported via IP-WSNs. In this paper, we propose a network-based mobility-supported IP-WSN protocol called mSFP, or the mSFP: "Multicasting-supported Inter-Domain Mobility Management Scheme in Sensor-based Fast Proxy Mobile IPv6 Networks". Based on [8,20], we present its network architecture and evaluate its performance by considering the signaling and mobility cost. Our analysis shows that the proposed scheme reduces the signaling cost, total cost, and mobility cost. With respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 7% and the total cost by 3%. With respect to the number of hops, the proposed scheme reduces the signaling cost by 6.9%, the total cost by 2.5%, and the mobility cost by 1.5%. With respect to the number of IP-WSN nodes, the proposed scheme reduces the mobility cost by 1.6%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.365-368
• /
• 2008

This paper presents a new concept of IP-based wireless sensor networks and also introduces a routing protocol that is based on clustering for global healthcare information system. Low-power wireless personal area networks (LoWPANs) conform the standard by IEEE 802.15.4-2003 to IPv6 that makes 6lowpan. It characterized by low bit rate, low power, and low cost as well as protocol for wireless connections. The 6lowpan node with biomedical sensor devices fixed on the patient body area network that should be connected to the gateway in personal area network. Each 6lowpan nodes have IP-addresses that would be directly connected to the internet. With the help of IP-address service provider can recognize or analysis patient biomedical data from anywhere on globe by internet service provider equipments such as cell phone, PDA, note book. The system has been evaluated by technical verification, clinical test, user survey and current status of patient. We used NS-2.33 simulator for our prototype and also simulate the routing protocols. The result shows the performance of biomedical data packets in multi-hope routing as well as represents the topology of the networks.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.7
• /
• pp.1302-1308
• /
• 2010

In this study, Zigbee Sensor Node to transmit harmful gases CO and $CO_2$ information using wireless communication within the ground and underground structures were developed. Wireless communication protocol was used Zigbee Stack included IEEE 802. 15.4 MAC protocol. For wireless transmission of detected harmful gas signal from ADC of MCU was implemented Zigbee Sensor Node that was developed protocol using Serial-Port-Profile(SPP) here. The proposed Zigbee Sensor Node was verified transmission distance from experiments. Transmission distance was into 90m in experiments. Distance experiments were measured at 10m intervals using sine & pulse wave input signal at indoors. The proposed Route Sensor Node was applied mesh routing protocol. When built up USN(Ubiquitous Sensor Network)using Route Sensor Node, transmission distance was not limited. On the experimental results, harmful gas values between direct measurements and USN measurements were consistent. The semiconductor CO sensor and N-DIR $CO_2$ sensor module as a harmful sensor was used. Therefore, the proposed Zigbee Sensor Node was verified about reliability and validity to build USN for transmission of harmful gas information.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1C
• /
• pp.97-108
• /
• 2012

This paper introduces a health monitoring system based on a wireless sensor network for weapon asset. This system can estimate the remaining lifetime and decide what should be done and when should it be done using the environmental conditions such as temperature, humidity and shock for weapon assets by sensor tag. And we describes its operating scenario and routing method for this system. Finally we introduce the developments of the sensor tag, portable reader, gateway and monitoring server.