• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2317-2322
• /
• 2009

In this paper, look into the applicable communication for unmanned vehicle system development, and make an alternative idea to IEEE 802.11a. "IEEE 802.11a" is differently from "IEEE 802.11b/g"-which used to 2.4GHz ISM band-as it use OFDM modulation system of 5GHz band, as contrasted with "IEEE 802.11b/g" of ISM band, it has advantage against falling-off the capability caused by interfered, and provide maximum 54Mbps communication speed. Made a priority tested Soft Roaming and Hard Roaming to ensure the sound boom of unmanned vehicle in the flat parking. According to the each effect value, Present a most suitable method of applicable to "IEEE 802.11a" to unmanned vehicle system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.2
• /
• pp.1-11
• /
• 2011

A lot of works on the throughput analysis of the IEEE 802.11 DCF have been studied since last few years. However, we should predict the throughput of the IEEE 802.11g that we mostly use today because the existing numerical results do not consider exactly the IEEE 802.11g with the physical layer ERP-OFDM parameters. In particular, we might have different results in the working WLAN s compared with the simple predictions of the throughput using the previous results. In this paper, we directly monitor the ERP-OFDM physical layer parameters on the operating WLANs, and then analyze the saturated DCF throughput with the well-known analytic model. Moreover, we measure the bandwidth utilization on the real WLANs working with FTP services, and then compare them with the analytic results. According to the experiment results, we confirm the usefulness of the analytic models which assume the saturated traffic sources.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.640-647
• /
• 2009

IEEE 802.11i is an amendment to the original IEEE 802.11/b,a,g standard specifying security mechanism by stipulating RSNA for tighter security. The RSNA uses TKIP(Temporal Key Integrity Protocol) and CCMP(Counter with CBC-MAC Protocol) instead of old-fashioned WEP(Wired Equivalent Privacy) for data encryption. This paper describes a design of a communication security engine for IEEE 802.11i MAC layer. The design includes WEP and TKIP modules based on the RC4 encryption algorithm, and CCMP module based on the AES encryption algorism. The WEP module suffices for compatibility with the IEEE 802.11 b,a,g MAC layer. The CCMP module has about 816.7Mbps throughput at 134MHz, hence it satisfies maximum 600Mbps data rate described in the IEEE 802.11n specifications. We propose a pipelined AES-CCMP cipher core architecture, which has lower hardware cost than existing AES cores, because CBC mode and CTR mode operate at the same time.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.161-168
• /
• 2011

This paper provides the performance measurement and analysis of Wireless LAN IEEE 802.11 in a mobile environment. The performances of IEEE802.11b/g and IEEE802.11p designed for Vehicle-to-Vehicle(V2V) communication are measured and analyzed. Diameter of communication and link access time are compared under variation of speed of the vehicle.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10A
• /
• pp.816-822
• /
• 2011

This paper provides the performance measurement and analysis of Wireless LAN IEEE 802.11 in a mobile environment. The performance of IEEE802.11b/g and IEEE802.11p that is designed for Vehicle-to-Vehicle(V2V) communication is measured and analyzed. Diameter of communication, link access time and delay are measured as vehicle's speed varies. Also, the performance is checked in a situation that the load to network varies. In conclusion, the futher research topics are discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.9
• /
• pp.740-745
• /
• 2013

This paper presents BER, FER performance comparison, especially on PHY mode of IEEE 802.15.4g and IEEE 802.11 under AWGN channel through a simulation, which is communication method using identical frequency bandwidth in M2M environment. This considers suitable communication method of required parameter. It is advantageous that FSK method is used in situations where the system require low complexity and inexpensive structure. And OFDM method is considered for system performance. Further, when the high throughput and various traffic characteristics of the system are required, it can be considered that the method of IEEE 802.11 OFDM PHY mode is used.

• 한국ITS학회:학술대회논문집
• /
• v.2006 no.10
• /
• pp.108-112
• /
• 2006

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1320-1328
• /
• 2007

In recent year, the popularity of WLAN has generated much interests on improvement and performance analysis of the IEEE 802.11 protocol. In this paper, we analyze two medium access methods of the IEEE 802.11 MAC protocol by investigating the MAC layer packet service times when arrival packet sizes have a general probability distribution. We use the M/G/1/K queueing model to analyze the throughput and the delay performance of IEEE 802.11 MAC protocol in a wireless LAN. We compare the performances of Basic access method and RTS/CTS access method. We take some numerical examples for the system throughput and the queue dynamics including the mean packet delay and packet blocking probability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.412-420
• /
• 2006

With the appearance of various types of traffic services in communication networks, a study on QoS(Quality of Service) packet scheduling mechanisms which can support differentiated service to each traffic service becomes very important. To meet this requirement, IEEE 802.11 Working Group established the IEEE 802.11e MAC protocol which categorizes every traffic services into 4 access categories(AC) and provides the differentiated service to each AC. In addition, the physical layer of IEEE 802.11a/g standards provide up to 54 Mbps transmission rate per one wireless LAN terminal. However, since the radio resource is hardly limited in wireless channel, it is necessary to find an efficient packet scheduling scheme to maximize the transmission efficiency. Therefore, in this paper, we proposed a new packet scheduling scheme that can enhance the total throughput by setting different contention windows(CW) of CSMA-CA channel access scheme to each wireless LAN terminal according its current channel states. Numerical results derived from using NS-2 network simulator have shown that our proposed packet scheduling scheme can enhance the performance of IEEE 802.11e more and more.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1613-1621
• /
• 2015

This paper analyzes the rate adaptation scheme and suggests applicable strategy of the MCS(Modulation and Coding Scheme) for improving DCF throughput in the IEEE 802.11ad and 802.11ad wireless LAN. IEEE 802.11ac and 802.11ad wireless LAN provide MCS technique that dynamically adjusts modulation level and code rate to the time-varying channel conditions in order to obtain considerably high data rates. But these standards did not provide rate adaptation algorithm, so this paper surveyes rate adaptation algorithm and suggests MCS scheme applied to IEEE 802.11ac and 802.11ad wireless LAN. Specially A MAC(Medium Access Control) layer throughput is evaluated over error-prone channel in the IEEE 802.11ac-based wireless LAN. In this evaluation, DCF (Distributed Coordination Function) protocol and A-MPDU (MAC Protocol Data Unit Aggregation) scheme are used. Using theoretical analysis method, the MAC saturation throughput is evaluated with the PER (Packet Error Rate) on the condition that the number of station, transmission probability, the number of parallel beams and the number of frames in each A-MPDU are variables.