• The Journal of Engineering Research
• /
• v.7 no.1
• /
• pp.53-60
• /
• 2005

Community Wireless Networks define the next generation wireless services. Multimedia usages for financial services over community Wireless LAN (WLAN) based mesh networks require link stability. Several new services are being proposed for multimedia over WLANs. Portable Internet Services are implemented by several wireless carriers to proliferate their customer base. However, these services are still expensive and require a central telecom/wireless carrier whose monopoly and preference defines the availability of new services. Our research project identifies the usage of these critical services in public places over the financial services backbone architecture to provide efficient easy-to-use and economical services to their customers and merchants without being dependent on the central wireless carrier. The user connects to the network using his regular WLAN NIC using the Mesh Router/Bridge interconnectivity and obtains the needed multimedia and financial services from the ATM-AP Gateway, In our proposed scenario, the ATN AP-MR use AODV protocol and MR-MC is based on 802.11g/a/b IEEE standard. We use multi path routing protocols for reducing the congestion over a particular route. We demonstrate the results of our simulations and test-bed outcome to evaluate link failure rate and oversubscription factors to eliminate network congestion and non-availability of the critical financial services.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.542-547
• /
• 2019

Autonomous train is investigated to increase the capacity of railroad, and the reliability of wireless communication plays a critical role in terms of decreasing the inter-train distance. In this paper, we propose a transmission scheme for autonomous train communication in highly congested environment. The proposed scheme, namely distributed uplink orthogonal frequency division multiple access (OFDMA) random access (UORA), applies the triggered uplink access (TUA) and the UORA, introduced in the sixth generation WLAN standard, IEEE 802.11ax, for communication devices on vehicle and platform in a distributed manner. The simulation results show that the proposed scheme efficiently improves the packet transmission success rate in highly congested channel conditions compared to the conventional enhanced distributed channel access (EDCA) transmission scheme.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.511-523
• /
• 2007

In broadband convergence network(BcN), heterogeneous broadband wired & wireless subnetworks and various terminal equipments will be interconnected. In order to provide end-to-end realtime multimedia services on such heterogeneous networking environment, as a result, two major problems should be resolved: i) Multimedia session establishment & negotiation that adjusts the differences in the capability of multimedia data processing at the end terminal nodes, ii) quality of service(QoS)-guaranteed connection establishment or resource reservation with connection admission control(CAC) in each heterogeneous subnetworks along the path. The session layer signaling(e.g., SIP/SDP) should be extended for QoS negotiation, and must be tightly cooperating with network layer signaling or resource reservation with CAC function. In this paper we propose a session and connection management architecture for the QoS-guaranteed realtime multimedia service provisioning on BcN, with Q-SIP/SDP, resource reservation protocol with traffic engineering extension, and CAC functions. The detailed interaction scenario and related algorithms for QoS-guaranteed realtime multimedia session, resource reservation and connection establishment are explained and analyzed. From the experimental implementation of the proposed scheme on a small scale BcN testbed, we verified that the proposed architecture is applicable for the realtime multimedia service provisioning. We analyze the network performance and QoS parameters in detail.

• The KIPS Transactions:PartC
• /
• v.18C no.4
• /
• pp.251-254
• /
• 2011

In a WLAN, the data reception rate of a user station depends not only on the received signal strength (RSS) from an AP (Access Point) but also on the contention level of the AP. However, since only the RSSs measured at the physical layer have been used for a station to select an AP to associate with, the station may not satisfy the minimum quality requirements necessary for a seamless IPTV service. Thus, in this paper, we propose an AP selection method to support quality requirements of the IPTV service in a wireless LAN without modifying the IEEE 802.11 standard. A user station keeps monitoring a contention level of APs around it and a quality of an ongoing IPTV service. If the quality deteriorates below a threshold, the station reassociates with another AP having the least load so that the ongoing IPTV program is played without disruption.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.659-665
• /
• 2017

In this paper, a low complexity fast Fourier transform(FFT) processor is proposed for multiple input multiple output(MIMO) systems. The IEEE 802.11ac standard has been adopted along with the demand for a system capable of high channel capacity and Gbps transmission in order to utilize various multimedia services using a wireless LAN. The proposed scalable FFT processor can support the variable length of 64, 128, 256, and 512 for 8x8 antenna configuration as specified in IEEE 802.11ac standard with MIMO-OFDM scheme. By reducing the required number of non-trivial multipliers with mixed-radix(MR) and multipath delay commutator(MDC) architecture, the complexity of the proposed FFT processor was dramatically decreased. Implementation results show that the proposed FFT processor can reduced the logic gate count by 50%, compared with the radix-2 SDF FFT processor. Also, compared with the 8-channel MR-2/2/2/4/2/4/2 MDC processor and 8-channel MR-2/2/2/8/8 MDC processor, it is shown that the gate count is reduced by 18% and 17% respectively.

• Journal of KIISE:Information Networking
• /
• v.33 no.1
• /
• pp.16-27
• /
• 2006

The wireless transmission medium inherently broadcasts a signal to all neighbor nodes in the transmission range. Existing asynchronous MAC protocols do not provide a concrete solution for reliable broadcast in link layer. This mainly comes from that an omni-directional broadcasting causes to reduce the network performance due to the explosive collisions and contentions. This paper proposes a reliable broadcast protocol in link taller based on directional antennas, named MDB(MAC protocol for Directional Broadcasting). This protocol makes use of DAST(Directional Antennas Statement Table) information and D-MACA(Directional Multiple Access and Collision Avoidance) scheme through 4-way handshake to resolve the many collision problem wit]1 omni-directional antenna. To analyze its performance, MDB protocol is compared with IEEE 802.11 DCF protocol [9] and the protocol 2 of reference [3], in terms of the success rate of broadcast and the collision rate. As a result of performance analysis through simulation, it was confirmed that the collision rate of the MDB protocol is lower than those of IEEE 802.11 and the protocol 2 of reference [3], and that the completion rate of broadcast of MDB protocol is higher than those of IEEE 802.11 and the protocol 2 of reference [3].

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.91-96
• /
• 2006

High efficiency switching mode circuits such as class I amplifiers have been well known in the MHz frequency range. The class E amplifier is a type of switching mode amplifier offering very high efficiency approaching 100%. In this paper, the class E amplifier has been designed by using the harmonic balance method of circuit simulator. The designed amplifier is realized by using pHEMT and microstrip line, shows 66% power added efficiency (PAE) at 2.4GHz with 17.6dBm output power. With -3dBm input power of wireless LAN, measured output spec01m can meet the required IEEE 802.11g standard spectrum mask. That means the required amplifier back off of 9dB from $P_{ldB}$ to satisfy the required wireless LAN spectrum mask.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.547-551
• /
• 2010

In this paper, Double rectangular patch with 4-bridges is investigated for solution of IEEE 802.11b/g(2.4GHz) and 802.11a(5.7GHz). Rectangular patch for 5.7GHz frequency band is printed on the PCB substrate and connected to another rectangular patch for 2.4GHz frequency band with 4-bridges to obtain dual band operation in a antenna element. The proposed antenna has a low profile and is fed by $50{\Omega}$ coaxial line. The dielectric constant of the designed antenna substrate is 3.27. Two rectangular patches have each resonance frequencies that are 2.4GHz and 5.7GHz. A dual-band characteristic is shown as connecting two rectangular patch using four bridges. Also, the proposed antenna is shown input return loss that is below -10dB at 2.4GHz and 5.7GHz of WLAN(Wireless LAN).

• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.122-125
• /
• 2005

This paper describes a design of a miniature patch antenna and its 4-channle array for 5.25 GHz wireless LAN band. Each patch element is designed for the low mutual coupling between each element and for the small size of the array antenna. The size of the each element is $7 mm{\times}14.5 mm{\times}5.6 mm$ and it satisfy IEEE 802.11a frequency band. It is arrayed for independent 4-channel operation. The total size of the array antenna is $35.6 mm{\times}52.5 mm{\times}5.6 mm$. The measured reflection coefficients and the radiation patterns of the fabricated antennas show the reasonable agreements with prediction.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.310-313
• /
• 2005

5GHz를 사용하고 최소6Mbps에서 최대 54Mbps까지 지원하는 IEEE 802.11a 무선 랜 에서는 데이터의 전송중에 발생하는 랜덤오류 및 연집오류의 정정을 위해서 길쌈부호기와 인터리버를 규정하고 있다. 길쌈부호기에서 다양하고 높은 데이터 전송율을 확보하기 위해서 변조방식과 전송율에 따라 높은 부호율을 얻기 위해 여러 개의 펑쳐링 기법을 사용해서 2/3와 3/4과 같은 높은 부호율이 얻어지도록 하고 있다. 펑쳐링을 거친 데이터는 Coding rate만큼의 비율로 데이터가 많아지고 이 데이터를 처리하기 위해서 가변클럭을 사용해야 한다. 가변클럭의 사용은 동기화 및 back-end 작업 시 여러 가지 문제를 발생시킨다. 본 논문에서 펑쳐링의 출력 비트를 바꾸고 인터리버에서 사용되는 메모리를 8x1의 메모리로 세분화 함으로써 Code rate에 상관없이 하나의 클럭으로 데이터의 병목현상을 처리 할 수 있다.