• Journal of Communications and Networks
• /
• v.11 no.6
• /
• pp.615-625
• /
• 2009

Worldwide inter-operability for microwave access (WiMAX) is a promising technology that provides high data throughput with low delays for various user types and modes of operation. While much research had been conducted on physical and MAC layers, little attention has been paid to a comprehensive and efficient security solution for WiMAX. We propose a hybrid security solution combining identity-based cryptography (IBC) and certificate based approaches. We provide detailed message exchange steps in order to achieve a complete security that addresses the various kind of threats identified in previous research. While attaining this goal, efficient fusion of both techniques resulted in a 53% bandwidth improvement compared to the standard's approach, PKMv2. Also, in this hybrid approach, we have clarified the key revocation procedures and key lifetimes. Consequently, to the best of knowledge our approach is the first work that unites the advantages of both techniques for improved security while maintaining the low overhead forWiMAX.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.20-21
• /
• 2008

In the IEEE 802.16 Wireless MAN standard, the best effort service class is ranked on the lowest position in priority so that only scarce resource may be available for it. Also, the best effort service is usually assisted by a MAC scheme based on reservation ALOHA without explicit acknowledgement. However, the standard only specifies the skeleton of the MAC scheme. In this paper, we propose some rules to specify the indefinite part of the MAC scheme as well as to improve the throughput and delay performance of the MAC scheme. As generic rules for demanding and granting resource, we first propose non-gated exhaustive, gated exhaustive, non-gated limited, and gated limited demand rules, and deficient and full grant rules. Secondly, we propose grant regulation rules, identified as replacement and lifetime rules, to avoid excessive grant incurred by not giving acknowledgement. Noting the residual resource is inflated by adopting a grant regulation rule, we finally propose a rule for investing the residual resource to a subscriber station. Simulation results confirm that a combination of proposed rules improves the performance of the MAC scheme.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.9-16
• /
• 2006

In this paper, we analyzed and measured the electrical crosstalk characteristics of a 1.25 Gbps triplexer module for Ethernet passive optical networks to realize fiber-tothe-home services. Electrical crosstalk characteristic of the 1.25 Gbps optical triplexer module on a resistive silicon substrate should be more serious than on a dielectric substrate. Consequently, using the finite element method, we analyze the electrical crosstalk phenomena and propose a silicon substrate structure with a dummy ground line that is the simplest low-crosstalk layout configuration in the 1.25 Gbps optical triplexer module. The triplexer module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and an analog photodetector as a cable television signal receiver. According to IEEE 802.3ah and ITU-T G.983.3, the digital receiver and analog receiver sensitivities have to meet -24 dBm at $BER=10^{-12}$ and -7.7 dBm at 44 dB SNR. The electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the dummy line with $100\;{\mu}m$ space from the signal lines and 4 mm separations among the devices satisfies the electrical crosstalk level compared to a simple structure. This proposed structure can be easily implemented with design convenience and greatly reduce the silicon substrate size by about 50 %.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.10
• /
• pp.989-995
• /
• 2006

This paper shows that the OFDM(Orthogonal Frequency Division Multiplex) system is robust to multipath than CDMA (Code Division Multiple Access) system and it has a strong possibility to be utilized as a supplementing wireless location system for the forthcoming portable internet network. The OFDM system based on IEEE 802.16e is a wireless TDD (Time Division Duplex) OFDMA (Orthogonal Frequency Division Multiple Access) system providing portable internet services in 2.3 GHz frequency band and is scheduled in service in Korea starting in 2006. In this paper, multipath error is calculated using a two-ray model and compared with that of a CDMA system which is following IS-95. The OFDM system shows a maximum multipath error of 3 m while a CDMA system shows a maximum multipath error of 61 m. For this simulation, an early-late technique is used. This technique is usually used to match synchronization of signal in DLL(Delay Lock Loop).

• ETRI Journal
• /
• v.33 no.3
• /
• pp.326-334
• /
• 2011

This paper outlines the time jitter effect of a sampling clock on a software-defined radio technology-based digital intermediate frequency (IF) transceiver for a mobile communication base station. The implemented digital IF transceiver is reconfigurable to high-speed data packet access (HSDPA) and three bandwidth profiles: 1.75 MHz, 3.5 MHz, and 7 MHz, each incorporating the IEEE 802.16d worldwide interoperability for microwave access (WiMAX) standard. This paper examines the relationship between the signal-to-noise ratio (SNR) characteristics of a digital IF transceiver with an under-sampling scheme and the sampling jitter effect on a multichannel orthogonal frequency-division multiplexing (OFDM) signal. The simulation and experimental results show that the SNR of the OFDM system with narrower band profiles is more susceptible to sampling clock jitter than systems with relatively wider band profiles. Further, for systems with a comparable bandwidth, HSDPA outperforms WiMAX, for example, a 5 dB error vector magnitude improvement at 15 picoseconds time jitter for a bandwidth of WiMAX 3.5 MHz profile.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.1-8
• /
• 2008

Low Density Parity Check codes(LDPC) are recently focused on communication systems due to its good performance. The standard of WiBro has also included LDPC codes as a channel coding. The weak point of implementation for LDPC encoder is that conventional binary Matrix Vector Multiplier has many clock cycles which limit throughput. In this paper, we propose semi-parallel architecture by using cyclic shift registers and exclusive-OR without conventional Matrix Vector Multipliers over the standard parity check matrices with Circulant Permutation Matrices(CPM). Furthermore, multi-rate encoder is designed by using proposed architecture. Our encoder with multi-rate for IEEE 802.16e LDPC has lower clock cycles and higher throughput.

• Journal of Communications and Networks
• /
• v.9 no.2
• /
• pp.118-127
• /
• 2007

We propose a link adaptation and selection method for the links constituting an orthogonal frequency division multiplexing (OFDM) based wireless relay network. The proposed link adaptation and selection method selects the forwarding, modulation, and channel coding schemes providing the highest end-to-end throughput and decides whether to use the relay or not. The link adaptation and selection is done for each sub-channel based on instantaneous signal to interference plus noise ratio (SINR) conditions in the source-to-destination, source-to-relay and relay-to-destination links. The considered forwarding schemes are amplify and forward (AF) and simple adaptive decode and forward (DF). Efficient adaptive modulation and coding decision rules are provided for various relaying schemes. The proposed end-to-end link adaptation and selection method ensures that the end-to-end throughput is always larger than or equal to that of transmissions without relay and non-adaptive relayed transmissions. Our evaluations show that over the region where relaying improves the end-to-end throughput, the DF scheme provides significant throughput gain over the AF scheme provided that the error propagation is avoided via error detection techniques. We provide a frame structure to enable the proposed link adaptation and selection method for orthogonal frequency division multiple access (OFDMA)-time division duplex relay networks based on the IEEE 802.16e standard.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.547-550
• /
• 2006

휴대 인터넷은 이동 중에도 무선으로 고속의 데이터 송수신이 가능한 통신 서비스로서 우리나라에서는 WiBro(Wireless Broadband)라고 명명되어 2006년 6월 상용 서비스를 시작하였다. 한국 정보 통신 기술협회(TTA)와 IEEE802.16e 표준에서 제시된 휴대인터넷 서비스는 기본적으로 기지국과 단말을 기반으로 한 CDMA통신 시스템과 유사한 셀룰러 망 구조를 가지고 있다. 와이브로에서 모든 RAS(Radio Access Station)는 매 5msec마다 프레임을 전송하고, 이 프레임의 앞 단에는 Preamble이 위치하고 있어 기지국과 단말의 Synchronization을 가능케 해준다. 각 RAS는 서로 다른 Preamble을 사용하므로 단말은 Preamble detection을 통해 기지국을 구분할 수 있다. 본 논문에서는 휴대인터넷을 이용한 무선측위의 해상도 및 가청성을 현장실험을 통하여 분석한다. 현재 상용화 되어 사용중인Wibro 신호를 기저대역으로 낮추고 이 신호를 디지타이저를 사용하여 20MHz의 샘플링 주파수로 수집한다. 5msec 주기의 Wibro프레임 중에서 Preamble을 Correlation detection 기법을 사용하여 기지국과 단말 사이의 relative delay를 측정하여 기지국들과 단말 사이의 거리의 차를 구한다. 거리측정치를 이용하여 Wibro 망에서의 무선측위 추정치를 구하고 해상도와 정확도 및 가청성 등의 Wibro의 측위성능을 분석한다.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.865-873
• /
• 2010

In this paper, a novel schedulability criteria is developed to provide handover calls with Quality of Service (QoS) guarantees in terms of both minimum available bandwidth, maximum tolerated packet delay, and other additive QoS constraints as required by the real-time mobile traffic. This requires prediction of the handover time using mobility trends on the mobile station, which is used as input to this work. After the handover time and the QoS are negotiated, the destination base station makes attempts to give priority to handover calls over new calls, and pre-reserves resources that will have more chance of being available during the actual handover.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.57-62
• /
• 2005

In this paper, we propose a channel estimation method by impulse signal train in OFDM. In order to estimate the channel response, 4 impulse signals are generated and transmitted during one OFDM (Orthogonal Frequency Division Multiplexing) symbol. The intervals between the impulse signals are all equal in time domain. At the receiver, the impulse response signals are summed and averaged. And then, the averaged impulse response signal is zero padded and fast Fourier transformed to obtain the channel estimation. The BER performance of the proposed method is compared with those of conventional estimation method using the long training sequence in fast fading environments. The simulation results show that the proposed method improves by 3 dB in terms of Eb/No, compared with the conventional method.