• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.7
• /
• pp.199-204
• /
• 2021

Digital substation refers to a substation that digitizes functions and communication methods of power facilities such as monitoring, measuring, control, protection, and operation based on IEC 61850, an international standard for the purpose of intelligent power grids. Based on the intelligent operating system, efficient monitoring and control of power facilities is possible, and automatic recovery function and remote control are possible in the event of an accident, enabling rapid power failure recovery. With the development of digital technology and the expansion of the introduction of eco-friendly renewable energy and electric vehicles, the spread of direct current distribution systems is expected to expand. MVDC is a system that utilizes direct current lines with voltage levels and transmission capacities between HVDCs applied to conventional transmission systems and LVDCs from consumers. Converting existing lines in substations, where most power equipment is alternating current centric, to direct current lines will reduce transmission losses and ensure greater current capacity. The process bus of a digital substation is a communication network consisting of communication equipment such as Ethernet switches that connect installed devices between bay level and process level. For MVDC linkage to existing digital substations, the process level was divided into two buses: AC and DC, and a system that can be comprehensively managed in conjunction with diagnostic IEDs as well as surveillance and control was proposed.

• Journal of Broadcast Engineering
• /
• v.17 no.5
• /
• pp.725-733
• /
• 2012

MPEG and VCEG have constituted a collaboration team called JCT-VC(Joint Collaborative Team on Video Coding) and have been developing the HEVC(High Efficiency Video Coding) standard. The next generation video coding standard HEVC shows higher compression rate compared with the H.264/AVC standard, but the encoder computational complexity of the HEVC encoder is significantly high. In order to reduce this computational complexity in the HEVC encoder, a fast prediction unit decision is proposed. The proposed fast prediction unit decision method reduces the encoder complexity by skipping the remaining prediction units if the current prediction unit does not have any non-zero quantized transform coefficient. The proposed method reduces the encoder computational complexity by 50.3% comparing with HM6.0 but it maintains the same level of coding efficiency.

• Journal of the Korean Society of Safety
• /
• v.31 no.6
• /
• pp.25-31
• /
• 2016

This paper has analyzed the structure, applicable regulations and the resistance characteristics of insulation ring type of CSST (Corrugated Stainless Steel Tubing for Gas). With the flammability test conducted in accordance with KS C IEC 60811-1-1, the evaluation of insulation resistance, temperature characteristics, and reliability has been conducted. An insulation ring type CSST consists of protective coating, tube, nut, insulation ring, packing, socket, and ball valve. Connecting an insulation ring type CSST to gas tubings for gas appliance is not permitted, moreover, the product shall be installed inside a sleeve pipe in case of buried installation such as the ceiling. Damages on protective coating and tube were detected when fire was applied to the test sample with a portable torch for 60 seconds. The insulation resistance of a normal product was $49.59M{\Omega}$, while that of the product completed the flammability test reduced to $9.21M{\Omega}$. The mean insulation resistance within the confidence Interval of 95% using the mini tap program 17 was $49.59M{\Omega}$ and the mean insulation resistance within the confidence interval reduced to $9.21M{\Omega}$. In the normal distribution analysis of 95% confidence interval, the value-P of the normal product was stable at 0.075 and AD(Anderson-Darling) statistic value was turned out to be 0.063, which is very normal, and the standard deviation was analyzed as 0.2586. The value P of the product completed the flammability test resulted in 0.005, the AD was 1.355 and the standard deviation reduced to 0.07908.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.409-412
• /
• 2005

A digital content have been utilized extensively without being limited to one territory of communication, computer, broadcasting, Mobile etc. A digital contents industry have been raised to a key point industry of a knowledge information society. An information infra setup of a global unit was processing to the development of Internet therefor copyright protection a digital contents and system for the officer have been desired. Like this, according as digital contents do fetters to MPEG-4 is circulated, copyright problem was risen. So, people had a lot of interests to protect and manage copyright. Hereupon, MPEG of the IS0/IEC established IPMP(Intellectual Property Management and Protection) standard, and supplements and corrects continuously standard. Therefore, existing system does fetters to MPEG-4 need system that process IPMP information. Hereupon. in this paper, designed system module that is processed by IPMP extension standard that progress now, and embodied copyright protection and management system that user can insert and update IPMP information efficiently within whole or specification part of MPEG-4 digital contents.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.33-40
• /
• 2014

One of the most important requirements for the Ethernet-based automobile is the reliability. In order to achieve this goal, we propose using the High-availability Seamless Redundancy (HSR) protocol (IEC 62439-3 clause 5) in these networks. The HSR protocol provides duplicated frame copies for each sent frame, which means that the destination node will receive at least one copy in case the second copy is lost due to a failure. In other words, there will be no network stoppage even if failure occurs. Moreover, the destination node will receive at least one frame copy with zero-recovery time (seamless) and it will not need to wait to receive the other copy if the first one is lost, which occurs it in the Ethernet standard, as a result of reconfiguration of the network paths. However, the main drawback of the HSR protocol is the unnecessary redundant traffic that is caused by the duplicated frames. Several solutions, including QR, VRing, RURT, and DVP, have already been proposed to improve the traffic performance of the HSR protocol. In this paper, we propose three automobile network topologies. each of which has pros and cons depending on the automobile requirements. Then we applied the HSR protocol with and without the QR and VRing approaches to each scenario. The comparison among these topologies depend on the traffic performance result for each of them. The QR and VRing approaches give a better traffic reduction percentage, ranging from 48% to 75% compared to the standard HSR protocol. Therefore they could limit the redundant traffic in automobile networks when the HSR protocol is used instead of the Ethernet network, which does not provide any seamless recovery if a failure occurs.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.4
• /
• pp.47-58
• /
• 2008

With the recent development of the ubiquitous computing technology, there are increasing interest and research in technologies such as sensors and RFID related to information recognition and location positioning in various ubiquitous fields. Especially, a standard specification was required for compatibility and interoperability in various RTLS(Real-Time Locating Systems) according to the development of RTLS to provide location and status information of moving objects using the RFID Tag. For these reasons, the ISO/IEC published the RTLS standard specification for compatibility and interoperability in RTLS. Therefore, in this paper, we designed and im plemented RTLS based on the spatial DSMS(Data Stream Management Stream) for efficiently managing and searching the incoming data stream of moving objects. The spatial DSMS is an extended system of STREAM(STanford stREam datA Manager) developed by Standford University to make various spatial operations possible. RTLS based on the spatial DSMS uses the SOAP(Simple Object Access Protocol) message between client and server for interoperability and translates client's SOAP message into CQL(Continuous Query Language) of the spatial DSMS. Finally, we proved the efficiency of RTLS based on the spatial DSMS by applying it for the staff location management service.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.271-282
• /
• 2013

Recently, ITU-T/VCEG and ISO/IEC MPEG have started a new joint standardization activity on video coding, called High Efficiency Video Coding (HEVC). This new standard gives significant improvement in terms of picture quality for high resolution video. The main challenge in this upcoming standard is the time complexity. In this paper we have focused on CU splitting algorithm. We have proposed a novel algorithm which can terminate the CU splitting process early based on the RD cost of the parent and current level and the motion vector value of the current CU. Experimental result shows that our proposed algorithm gives on average more than about 10% decrement in time over ECU [8] with on average 1.78% of BD loss on the original.

• Journal of Broadcast Engineering
• /
• v.25 no.1
• /
• pp.94-104
• /
• 2020

Currently media consumption over fixed/mobile Internet is mostly conducted by adaptive media streaming technology such as DASH (Dynamic Adaptive Streaming over HTTP), which is an ISO/IEC MPEG (Moving Picture Experts Group) standard, or some other technologies similar to DASH. All these heavily depend on the HTTP caches that ISPs (Internet Service Providers) are obliged to provide sufficiently to make sure fast enough Web services. As a result, as the number of media streaming users increases, ISPs' burden for HTTP cache has been greatly increased rather than CDN (Content Delivery Network) providers' server burden. Hence ISPs charge traffic cost to CDN providers to compensate for the increased cost of HTTP caches. Recently in order to reduce the traffic cost of CDN providers, P2P (Peer-to-Peer)-assisted DASH system was proposed and a peer selection algorithm that maximally reduces CDN provides' traffic cost was investigated for this system. This algorithm, however, tends to concentrate the burden upon the selected peer. This paper proposes a new peer selection algorithm that distributes the burden among multiple peers while maintaining the proper reduction level of the CDN providers' cost. Through implementation of the new algorithm in a Web-based media streaming system using WebRTC (Web Real-Time Communication) standard APIs, it demonstrates its effectiveness with experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.730-736
• /
• 2014

Test standards for electrical and electronic equipment required for ship operations is applying the IEC-60533 standard. However, although a test procedure and a specified regulation are clearly defined in the deck and bridge zone and general power distribution zone, they are not regulated in the special power distribution zone with ship propulsion system. For these reasons, the costs for additional research and development have been invested. In this paper, we was measured power noise in a special power distribution zone in ship and we were compared and analyzed values measured. The actual experiments are performed on the ship of Korea Maritime and Ocean University. As a result, the acquired data on Hanbada shows that loop antenna with low frequency band(160kHz) and ultra log antenna with high frequency band(1.97GHz)occur about 6-8dB differences and about 8.7 difference respectively. Also, the acquired data on Hannara shows that each loop antenna of 1MHz, 11MHz, and 25MHz occurs about 7dB difference about 4-5dB differences respectively. so standard of Special distribution zone must be specified by comparative analysis of data obtained by the experiment more.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.415-420
• /
• 2016

The purpose of this study was to evaluation of the performance characteristic for mammography by using edge device that mammography equipment improves essential in the correct diagnosis for the maintenance. We measured the modulation transfer function (MTF), the noise power spectrum (NPS), and the detective quantum efficiency (DQE) using the 61267 RQA-M2 based on commission standard international electro-technical commission (IEC). As a results, spatial resolution of elenia demensions tomo and lorad selenia mammography were maintained at $10mm^{-1}$ and NPS and DQE including the low nyquist frequency indicated to $6.0mm^{-1}$. Therefore, regulary QA of mammography system should be necessary. This study can be contribute to evaluate QA for performance characteristic of mammography of DDR system.