• 제목/요약/키워드: IEC 60811-1-1

검색결과 6건 처리시간 0.027초

FMEA에 근거한 LV URD 케이블의 고장분석 (Failure Analysis of LV URD Cable based on FMEA)

  • 송길목;한운기;김영석;김선구;곽희로
    • 조명전기설비학회논문지
    • /
    • 제21권5호
    • /
    • pp.90-98
    • /
    • 2007
  • 본 연구의 목적은 고장 케이블(LV URD(low voltage underground) cable)의 원인을 밝히는데 있다. 분석방법은 외형패턴, 열패턴, 표면구조 분석, 열분석, 성분분포 등 다양한 분석기기를 이용하여 분석되었다. 국제기준과 사고케이블 제작회사가 제시하고 있는 규정이 일치하는지의 여부를 분석하였으며, 국내산 케이블과의 비교분석하였다. 그 내용을 요약하면 다음과 같다. (1) 사고케이블 자체의 절연성능을 저하시키는 요인으로 IEC 60502-1과 IEC 60811-1-1에 의한 절연피복의 최소 두께가 시방(specification)과 일치하지 알음을 확인하였다. (2) 적외선분광기에 의해 적외선흡광피크가 동일 재료에서 일치하지 않는 것으로 나타났다. (3) PVC bedding 부분이 열적으로 취약하여 장시간 현장에 노출되어 사용되는 경우 이와 유사한 패턴의 사고를 유발할 것으로 판단된다.

22.9[kV]이하 XLPE 전력케이블의 열 충격 시험 및 절연파괴 특성 (The Properties of Dielectric Breakdown and Thermal Stresses below 22.9[kV] Class XLPE Power Cable)

  • 김영석;송길목;김선구
    • 조명전기설비학회논문지
    • /
    • 제22권4호
    • /
    • pp.54-60
    • /
    • 2008
  • 2002년부터 시행되어오고 있는 제조물 책임법에 의해 사고케이블의 원인분석과 사고패턴에 대한 데이터베이스화가 중요하다. 더욱이 가속열화상태에서 전력케이블 사고의 패턴 및 모의실험은 데이터베이스 시스템 구축에 필요하다. 본 논문에서는 열 열화 따른 22.9[kV]이하 케이블의 열 충격시험을 수행하였다. 이 시험은 IEC60811-3-1에 따른다. 시험결과로부터, 22.9[kV]급 A사 전력케이블은 표면이 변색되었고 길이방향으로 급격하게 감소되었다. 특히, A사 전력케이블의 열 중량 특성이 심하게 변함에 따라, 케이블 제조상의 문제일 것이라 추측된다. 만약 전력케이블의 제조상의 결함에 의한 것이라면, 피해자들은 PL환경 하에 손해배상을 받을 수 있을 것이다.

오염물질에 따른 HFIX 절연전선 피복의 특성 변화에 관한 연구 (Characteristics of HFIX Insulated Wire Sheaths Contaminated by Pollutants)

  • 최수길;남영재;진세영;김시국
    • 한국화재소방학회논문지
    • /
    • 제34권3호
    • /
    • pp.8-17
    • /
    • 2020
  • 본 논문은 오염물질에 따른 HFIX 절연전선 피복의 특성변화에 관한 연구이다. HFIX 절연전선 피복을 오염시키기 위해 전선의 내수성시험 항목인 KS C IEC 60811-1-3 규격을 인용, 오염물질을 선정하고 선정된 오염물질에 시료를 노출시켜 주차 별 최대 4주간 노출된 실험시료를 제작하였다. 그 후 주차 별 시료들을 대상으로 최대인장하중 및 신장률을 측정하였다. 오염노출 기간이 길어짐에 따라 최대인장하중이 상온시료의 경우 6.22%, 고온시료 6.52%, 방청윤활제 19.94% 감소하였고, 신장률 또한 급격하게 감소하여 피복 특성저하가 뚜렷하게 나타났다. 추가적인 주사전자현미경을 이용한 표면 분석결과 오염기간이 길어짐에 따라 천공, 갈라짐, 용융 등의 구조 변경 현상이 발생되어 기계적 특성이 감소되는 것으로 나타났다. 따라서 절연전선의 성능저하를 방지하기 위해 검사주기 및 보수시기의 마련이 필요할 것으로 생각된다.

PL법 대응을 위한 전력케이블의 열 충격 및 절연파괴 특성 (The Properties of Breakdown and Test for Resistance to Cracking of Power Cable for PL Countermeasure)

  • 김영석;송길목;김선구
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2007년도 추계학술대회 논문집
    • /
    • pp.349-352
    • /
    • 2007
  • It is impossible to database(DB) the patterns of cable events and cause analysis of faulted cable because the product liability(PL) law have been enforced in Korea, since 2002. In additions, simulation and pattern of cable events are needed for DB system under accelerated deterioration. In this paper, we tested for resistance to nicking of cable below the 22.9kV class due to thermal stresses. This method of exam is following IEC 60811-3-1(Common test methods for insulating and sheathing materials of electric cables). First of all, set the cable in the thermal stress instrument, temperature changed from -20 degree to 120 degree. After thermal stress, we observed a surface crack of cable through microscope and carried out AC withstand voltage test.

  • PDF

PL법 환경하에서 열 충격에 따른 전력케이블의 재료분석 및 사고위험성 (The Accident Hazard and Material Analysis of Power Cable due to Thermal Stress under PL System)

  • 김영석;송길목;정진수;정종욱;김선구;김상현
    • 전기학회논문지
    • /
    • 제57권1호
    • /
    • pp.82-87
    • /
    • 2008
  • It is impossible to database(DB) the patterns of power cable events and cause analysis of faulted cable because the product liability(PL) law have been enforced in Korea, since 2002. In additions, simulation and pattern of power cable events are needed for DB system under accelerated deterioration. In this paper, we tested for resistance to cracking of cable below the 22.9kV class due to thermal stresses. This method of exam is following IEC 60811-3-1(Common test methods for insulating and sheathing materials of electric cables). From the results, The 22.9kV calss A power cable was discolored on the surface and significantly reduced in the longitudinal direction. As the thermal weight properties of A power cable was definitely varied, we are able to guess the problem of manufacture. If the cable was defect by the manufacture, the victims would be able to claim for damage in the PL system.

절연링형 금속플렉시블호스(CSST)의 저항 특성 및 신뢰성 평가 (The Resistance Characteristics and Reliability Evaluation of an Insulation Ring Type of Corrugated Stainless Steel Tubing(CSST))

  • 이장우;김점식;최충석
    • 한국안전학회지
    • /
    • 제31권6호
    • /
    • pp.25-31
    • /
    • 2016
  • This paper has analyzed the structure, applicable regulations and the resistance characteristics of insulation ring type of CSST (Corrugated Stainless Steel Tubing for Gas). With the flammability test conducted in accordance with KS C IEC 60811-1-1, the evaluation of insulation resistance, temperature characteristics, and reliability has been conducted. An insulation ring type CSST consists of protective coating, tube, nut, insulation ring, packing, socket, and ball valve. Connecting an insulation ring type CSST to gas tubings for gas appliance is not permitted, moreover, the product shall be installed inside a sleeve pipe in case of buried installation such as the ceiling. Damages on protective coating and tube were detected when fire was applied to the test sample with a portable torch for 60 seconds. The insulation resistance of a normal product was $49.59M{\Omega}$, while that of the product completed the flammability test reduced to $9.21M{\Omega}$. The mean insulation resistance within the confidence Interval of 95% using the mini tap program 17 was $49.59M{\Omega}$ and the mean insulation resistance within the confidence interval reduced to $9.21M{\Omega}$. In the normal distribution analysis of 95% confidence interval, the value-P of the normal product was stable at 0.075 and AD(Anderson-Darling) statistic value was turned out to be 0.063, which is very normal, and the standard deviation was analyzed as 0.2586. The value P of the product completed the flammability test resulted in 0.005, the AD was 1.355 and the standard deviation reduced to 0.07908.