• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.255-261
• /
• 2010

In this paper, a substation HMI based on IEC 61850 is proposed that uses SCL to have all information in substation to include standard concept of IEC 61850. A proposed substation HMI using SCL based on IEC 61850 expresses different display by each substation structure and component device change in substation. A proposed substation HMI is designed by IEC 61850 standard, and it suits for future substation HMI based on IEC 61850. A proposed HMI is proved by a program that is made by Visual C++ to use SCL file based on XML.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.436-444
• /
• 2018

Currently, the new substation automation uses the international standard IEC 61850 communication protocol. KEPCO is also constructing a new substation based on IEC 61850 from 2013 through the pilot application and research and development starting from 2007. However, there are few cases where existing substations(Transformer, T/L GIS, D/L GIS, etc.) have been used, and RTU based substations operating systems have been changed to SA substations based on IEC 61850. Therefore, the introduction of IEC 61850 in existing substation facilities has the advantage of enhancing the substantiality of the substation by reusing existing facilities, improving the interoperability with the latest substations introduced, and converting existing substations into systems suitable for unmanned operation. In this paper, we introduce a case of changing the existing RTU based substation operation system to digital substation using IEC 61850 field information processor, Ethernet switch and SA operation system. Also, IEC 61850 client authentication program and Wireshark, which is a packet analysis tool, verify IEC 61850 conformance and its feasibility.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.249-253
• /
• 1991

Barnyard millet (Echinochloa crusgalli var. frumentacea) has been detected as the best fodder crop in Korea for earlier and/or later season crop. The objective of the study was to examine varieal differences among the varieties introduced from ICRISAT and cultivated in Korea for salt tolerance and green fodder and grain yield under the saline and normal upland soil conditions, IEC 514, IEC 515, IEC 518 and IEC 528 introduced from ICRISAT were relatively highly tolerant to saline soil and with higher green fodder and grain yields, and also were very earlier headed and matured as compared with the Korean local varieties and King.

• Journal of IKEEE
• /
• v.12 no.3
• /
• pp.151-157
• /
• 2008

The DNP3.0 and the IEC61850 are the most important standards in the SCADA systems for the power. Each standard has strength and weakness, so they will coexist for a while. This paper presents a design of the gateway function between DNP3.0 and IEC61850. Both standards use object-oriented modelling methods, so, they have some similarities. However, the DNP3.0 objects are described by object number and index, and the IEC61850 objects are described by name. So there should be mapping function between the object number and index of DNP3.0 objects and the object name of IEC61850 objects. We analyse the communication profiles of both standards, and shows the service-primitive mapping table and the procedure of the gateway function.

• Journal of Biomedical Engineering Research
• /
• v.36 no.3
• /
• pp.69-78
• /
• 2015

Ultrasonic physiotherapy systems should comply with IEC 60601-2-5(particular requirements for safety of ultrasonic physiotherapy equipment) standard for safety of patients and clinical performances. One of the most important parameters in the standard is the effective radiating area ($A_{ER}$). It has to be measured in accordance with IEC 61689 (field specifications and methods of measurement in the frequency range 0.5MHz to 5MHz). Typical ultrasonic physiotherapy system works in the frequency range 1MHz ~ 3MHz to comply with the IEC 61689. However, ultrasonic physiotherapy system using frequencies over 5MHz is out of the IEC 61689's scope. That is, even if such ultrasonic physiotherapy systems are developed by demands of the market, there is no standard to apply. It is the motivation for this study. Whereas there are other parameters to be considered, this study focuses on the effective radiating area and shows effectiveness of applying IEC 61689 in measuring effective radiating area of ultrasonic physiotherapy systems using frequency range over 5MHz by comparing the results of computer simulation and experiment. Results of this study shows that applying the IEC 61689 standard to ultrasonic physiotherapy system using frequency range over 5MHz is possible.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.372-380
• /
• 2009

In this paper, we analyze the active RFID systems ISO/IEC 18000-7 and ISO/IEC 18000-4. In order to improve the coverage in sensor networks, which consist active RFID tag, we propose RFID multi-hop relay system using active RFID relay tag. To compare the performance between the existing ISO/IEC 18000-7 system and the proposed RFID multi-hop relay system, we introduce new system efficiency measure and sensitivity-based measure of achieved coverage. Also, we analyze the performance of the proposed system and compare it with that of the existing system through MCL (Minimum Coupling Loss) analysis and SLS (System Level Simulation) analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.522-531
• /
• 2010

Appropriate networks are required for the processing of various kinds of data generated on shipboard. The international standards, NMEA 2000 and IEC 61161-4, meet this requirement. NMEA 2000 is good for the processing of real time data, and IEC 61162-4 is better for the integrated management of such data. Therefore, NMEA 2000 data should be conversed into IEC 61162-4 format for the integrated management. This paper presents files and algorithm for the format conversion, and also describes their implementation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.36-41
• /
• 2009

In this paper an Investigation into the actual condition of electrical equipment installation for the inspection method development based on IEC 60364. The analysis objects are the difference between electrical equipments installation in korea & electrical equipments installation based on the IEC 60364. The measurement elements are loop impedance, operating characteristic of circuit breaker and protective conductor continuance. As a result, the korea electrical equipments installation was almost same the TT system but some different of protective conductor continuance. Electrical equipments installed TN-C-S has noting problem about installation but manager dose not understand about IEC 60364.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.5
• /
• pp.939-946
• /
• 2013

This paper proposes normal behavior profiling methods for anomaly detection in IEC 61850 based substation network. Signature based security solutions, currently used primarily, are inadequate for APT attack using zero-day vulnerabilities. Recently, some researches about anomaly detection in control network are ongoing. However, there are no published result for IEC 61850 substation network. Our proposed methods includes 3-phase preprocessing for MMS/GOOSE packets and normal behavior profiling using one-class SVM algorithm. These approaches are beneficial to detect APT attacks on IEC 61850 substation network.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.4
• /
• pp.515-522
• /
• 2015

Through the correspondence works with IEC in the smart grid fields and power IT fields, we set up the interpretation work procedure and defined the work rule for correspondence by analyzing the work results. In addition, we suggest cases for discussion of terms and definitions in the IEC and analyze them and then propose a matrix classification system for standardization to solve the cases for discussion. The matrix classification system with 3-axes of classification has been applied to newly emerging terminologies followed by smart gird. We drew the usefulness in search of terms in application fields and showed the cases of applying the matrix classification. The IEC Electropedia classification standard is unclear and the classification is mixed with principle, application and product areas. We proposed a new working group in IEC TC1 for research on the matrix classification system and then TC 1 decided to organize a new WG titled in the "IEV structure and supporting tools".