• Journal of information and communication convergence engineering
• /
• 제8권2호
• /
• pp.155-158
• /
• 2010

In this article, we proposed a new interference canceller using the adaptive algorithm. We designed constant modulus algorithm-correlation normailized least mean square (CMA-CNLMS) for wireless system. This structure is normalized LMS algorithm using correlation between the desired and input signal for cancelling the interference signals in the wideband code division multiple access (WCDMA) system. We showed that the proposed algorithm could improve the Mean Square Error (MSE) performance of LMS algorithm. MATLAB (Matrix Laboratory) is employed to analyze the proposed algorithm and to compare it with the experimental results. The MSE value of the LMS with mu=0.0001 was measured as - 12.5 dB, and that of the proposed algorithm was -19.5 dB which showed an improvement of 7dB.

• 한국전자파학회논문지
• /
• 제14권2호
• /
• pp.183-191
• /
• 2003

본 논문은 동일 주파수 무선통신 시스템에서 발생되는 궤환신호를 상쇄하기 위한 간섭잡음제거기에 관한 연구이다. 송신 안테나에서 수신 안테나로 시변 궤환되는 신호는 수신 시스템의 성능을 저하시킨다. 따라서, 본 논문에서는 이러한 시변 궤환신호를 제거하므로써 수신기의 발진현상을 방지하고 전력증폭기의 최대 출력을 지속적으로 유지하도록 하는 적응성 궤환방식을 이용한 간섭잡음제거기를 제안하였다.

• 한국전기전자재료학회논문지
• /
• 제16권3호
• /
• pp.253-262
• /
• 2003

In this paper, the interference cancellation system, which is used to cancel the feedback signal in the wireless communication system with the same frequency, is studied. The time varying feedback signal generated from transmitter antenna to receiver antenna reduces the performance of the receiver system. the interference cancellation system using adaptive feedback method(AF-ICS) is suggested to prevent the oscillation of the receiver system and maintain the maximum output power of the power amplifier by the reduction of time-varying feedback signal and also this paper conforms that the oscillation disappears from the output signal by cancellation of the feedback signal and the total output power is satisfied the system specification.

• 한국통신학회논문지
• /
• 제33권3A호
• /
• pp.327-334
• /
• 2008

동일 채널 중계기에서는 송 수신 신호간의 간섭으로 인해 중계기의 출력이 제한되는 문제점이 있다. 이러한 문제를 해결하기 위해 중계기에서 수신 신호를 복조하여 궤환채널을 추정하고 궤환신호를 제거하는 방법이 제시되었으나, T-DMB 시스템과 같이 파일럿 간격이 넓은 시스템에 복조형 궤환신호 제거방법을 적용할 경우 궤환채널 추정 속도가 느리다는 단점이 있다. 이를 극복하기 위해 본 논문에서는 시간영역의 파일럿을 여러 개의 서브 그룹으로 분할하여 궤환채널을 추정함으로써 적응 필터의 갱신 횟수를 증가시킬 수 있는 방법을 제안한다. 제안된 방법은 궤환채널 추정 속도를 개선하여 궁극적으로 궤환신호 제거 성능을 향상시킨다. 모의실험을 통해 제안된 방법이 기존 방법에 비해 궤환채널 추정 속도와 잔류 궤환신호 전력 (RFP) 측면에서 우수함을 보인다.

• 방사선산업학회지
• /
• 제6권1호
• /
• pp.31-40
• /
• 2012

There are two methods to fabricate the readout electronic to a large-area CMOS image sensor (LACIS). One is to design and manufacture the sensor part and signal processing electronics in a single chip and the other is to integrate both parts with bump bonding or wire bonding after manufacturing both parts separately. The latter method has an advantage of the high yield because the optimized and specialized fabrication process can be chosen in designing and manufacturing each part. In this paper, LACIS chip, that is optimized design for the latter method of fabrication, is presented. The LACIS chip consists of a 3-TR pixel photodiode array, row driver (or called as a gate driver) circuit, and bonding pads to the external readout ICs. Among 4 types of the photodiode structure available in a standard CMOS process, $N_{photo}/P_{epi}$ type photodiode showed the highest quantum efficiency in the simulation study, though it requires one additional mask to control the doping concentration of $N_{photo}$ layer. The optimized channel widths and lengths of 3 pixel transistors are also determined by simulation. The select transistor is not significantly affected by channel length and width. But source follower transistor is strongly influenced by length and width. In row driver, to reduce signal time delay by high capacitance at output node, three stage inverter drivers are used. And channel width of the inverter driver increases gradually in each step. The sensor has very long metal wire that is about 170 mm. The repeater consisted of inverters is applied proper amount of pixel rows. It can help to reduce the long metal-line delay.