• Journal of Environmental Health Sciences
• /
• v.45 no.6
• /
• pp.594-604
• /
• 2019

Objectives: This study developed and validated an analysis method of urinary metals and metalloids that can be applied inductively with coupled plasma mass spectrometry (ICP-MS). Methods: 0.3 mL of urine was used to analyze 25 metal and metalloid compounds using ICP-MS. The validation of the analytical method included linearity, accuracy, precision, and the calculation of detection limits. In addition, a comparison test was performed with the graphite furnace atomic absorption spectrometry (GF-AAS) method, which is the current standard method, with urine samples of 66 healthy subjects. Results: The linearities (R²) of calibration curves of all 25 compounds were ≥ 0.999. Of the 25 compounds, the intra-day and inter-day accuracy% of 17 and 20 met ≤15%, respectively. In addition, fifteen compounds showed ≤15% recovery% for certificated reference materials. Intraclass correlation coefficients of the comparison between the current methods and new methods in this study were 0.952 (p-value<0.001) and 0.911 (p-value<0.001) for urinary cadmium and mercury, respectively. Conclusion: This study proposes an efficient simultaneous methodology that can analyze multi elements in smaller sample amounts. More reproduction experiments are needed in the future.

• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.576-584
• /
• 1994

The method described offers rapid and efficient sample preparation using on-line microwave digestion of metal oxides in water sample with direct elemental detection by ICP-AES. The open tubing digestion system(OTD) and the restraint tubing digestion system(RTD) for flow injection(FI) were designed and tested to find the optimum conditions. Comparison of OTD and RTD indicated that RTD was 3 times faster on the digestion time, and 10 times higher on sample mass. Finally, the results of RTD agree well with those by conventional microwave open vessel in all cases and show good precision; Fe and Cu show good with about 5% of RSD, while Zn and Co more or less than 10% RSD.

• Analytical Science and Technology
• /
• v.21 no.5
• /
• pp.364-374
• /
• 2008

Antarctic Environmental Monitoring Handbook' was published by COMNAP/SCAR in 2000. The standardized method described in this handbook is recommended for monitoring of antarctic environment. High pressure bomb technique in this guide was used to decompose soil samples. In compliance with this guide book, high pressure bomb technique was applied to decompose the antarctic soil sampled at the King Sejong Station. An Isotope Dilution-Inductively Coupled Plasma-Mass Spectrometry (ID-ICP-MS) was applied to determine mass concentrations of Pb, Cu and Zn in the soil. The accuracy in this method was verified by the analysis of certified reference materials (CRM) of NIST 2702 (marine sediment). The analytical results agreed with certified value within the range from 99.5~100.8%. Matrix separation was necessitated for the determination of Cu and Zn by Chelex 100 ion exchange resin. As a result, the average mass concentrations of Pb, Cu and Zn which are suspected to be caused by anthropogenic pollution were 332.9 mg/kg, 95.6 mg/kg and 115.3 mg/kg, respectively. Those for the metals sampled in the soils of the remote regions from the station were 28.1 mg/kg, 101.8 mg/kg and 115.6 mg/kg, respectively.

• Herbal Formula Science
• /
• v.24 no.2
• /
• pp.80-99
• /
• 2016

Objectives : Instrumental chemical analysis was utilized to investigate the effect of Add-Omit-Saenghyeoryunbu-eum(AO-SHU) on diabetic treatment. One of the most exciting, yet also controversial, arguments is the safety and biological mechanisms of the natural medicine on human body. Therefore, the aim of this study is to provide a better understanding on bioactive chemical components, hazards of heavy metal contamination and biological mechanism of the diabetic medicine composed of 12 different natural herbs. Methods : To study bioactive compound and metallic component in the diabetic medicine in detail, LC-MS/MS (Liquid Chromatography-Mass/Mass), GC (Gas Chromatography) and ICP (Inductively Coupled Plasma) were utilized to characterize the extract of the diabetic medicine and the result was compared with 18 marker substances selected from literature survey. In addition, in vitro assay experiments including GPR 119 activity and human DGAT-1 inhibition, and OGTT (Oral Glucose Tolerance Test) were performed to verify the effectiveness of this medicine on diabetic treatment. Results : Out of 18 marker substances, 9 bioactive compounds were identified from LC-MS/MS analysis which include Citruline, Catalpol, Berberine, Ginsenoside Rb1, Ginsenoside Rg1, Oleanolic acid, β-Sitosterol, Mangiferin, and Schizandrin. ICP study on 245 residual pesticides revealed that 239 species were not detected but 6 species, Dimethomorph, Trifloxystrobin, Pyraclostrobin, Isoprocarb, Carbaryl and Flubendiamide, while the amounts are trace levels, below permitted concentrations. The biological activity was observed in vitro assay and Oral Glucose Tolerance Test(OGTT), which are consistent with a preliminary clinical test result, a drop in blood sugar level after taking this herbal medicine. Conclusions : Instrumental chemical analysis using LC-MS/MS, GC, and ICP was conducted successfully to identify bioactive compounds in AO-SHU for the treatment of diabetes, finding 9 bioactive compounds. Furthermore, in vitro assay experiments and OGTT show that AO-SHU has its biological activities, which imply that it can be a candidate for the future diabetes remedy.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.1
• /
• pp.77-84
• /
• 2024

Four children's cosmetic sets were purchased online, labeled for use from 4 years of age, and 81 components of each were analyzed for lead, cadmium, arsenic, antimony, nickel, cobalt, copper, chromium, and mercury by inductive coupled plasma - mass spectrometry (ICP - MS). The average metal concentrations were as follows: 0.82 ㎍/g for lead, 0.03 ㎍/g for cadmium, 0.97 ㎍/g for arsenic, 0.52 ㎍/g for antimony, 2.32 ㎍/g for nickel and 0.01 ㎍/g for mercury which was lower than the acceptable standards for all products. Higher mean values of lead, antimony, cobalt, and copper were detected in imported than domestic products (p < 0.05). There was a statistically significant difference in the average values of heavy metals according to the type of cosmetics (p < 0.05), with eyeshadow showing the highest mean values of arsenic 2.47 ㎍/g, nickel 6.36 ㎍/g, and chromium 11.06 ㎍/g. and the highest mean concentrations were 1.20 ㎍/g for lead, 1.17 ㎍/g for antimony, and 23.60 ㎍/g for copper in blusher. The levels of cobalt in the 81 children's cosmetics were ND ~ 5.23 ㎍/g, copper were ND ~ 379.61 ㎍/g, and chromium were detected ND ~ 36.95 ㎍/g, respectively. Brown colored cosmetics had the highest mean concentrations of nickel and cobalt. Purple-colored cosmetics had the highest mean concentration of lead and chromium.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.25.1-28
• /
• 2000

In this study, $Y_2O_3$ thin films were etched with inductively coupled plasma (ICP). The etch rate of $Y_2O_3$ , and the selectivity of $Y_2O_3$ to YMnO$_3$were investigated by varying $Cl_2$/($Cl_2$+Ar) gas mixing ratio. The maximum etch rate of $Y_2O_3$ , and the selectivity of $Y_2O_3$ to YMnO$_3$ were 302/min, and 2.4 at $Cl_2$/($Cl_2$+Ar) gas mixing ratio of 0.2 repetitively. In x-ray photoelectron spectroscopy (XPS) analysis, $Y_2O_3$ thin film was dominantly etched by Ar ion bombardment, and was assisted by chemical reaction of Cl radical. These results were confirmed by secondary ion mass spectroscopy(SIMS) analysis. YCl, and $YC_3$ existed at 126.03 a.m.u, and 192.3 a.m.u, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05b
• /
• pp.12-16
• /
• 2001

We investigated the etching characteristics of $YMnO_3$ thin films in high-density plasma etching system. In this study. $YMnO_3$ thin films were etched with $CF_{4}/Ar$ gas chemistries in inductively coupled plasma (ICP). Etch rates of $YMnO_3$ were measured according to gas mixing ratios. The maximum etch rate of $YMnO_3$ is 18 nm/min at $CF_{4}/(CF_{4}+Ar)$ of 20%. In optical emission spectroscopy (OES) analysis, F radical and Ar* ions in plasma at various gas chemistries decreased with increasing $CF_4$ content. Chemical states of $YMnO_3$ films exposed in plasma were investigated with x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). There is a chemical reaction between metal (Y, Mn) and F and metal-fluorides were removed effectively by Ar ion sputtering. $YF_x$, $MnF_x$ such as YF, $YF_2$, $YF_3$ and $MnF_3$ Were detected using SIMS analysis. The etch slope is about $65^{\circ}C$ and free of residues.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.25-28
• /
• 2000

In this study, $Y_2$O$_3$ thin films were etched with inductively coupled plasma (ICP). The etch rate of $Y_2$O$_3$, and the selectivity of $Y_2$O$_3$ to YMnO$_3$ were investigated by varying Cl$_2$/(Cl$_2$+Ar) gas mixing ratio. The maximum etch rate of $Y_2$O$_3$, and the selectivity Of $Y_2$O$_3$ to YMnO$_3$ were 302/min, and 2.4 at Cl$_2$/(Cl$_2$+Ar) gas mixing ratio of 0.2 repectively. In x-ray photoelectron spectroscopy (XPS) analysis, $Y_2$O$_3$ thin film was dominantly etched by Ar ion bombardment, and was assisted by chemical reaction of Cl radical. These results were confirmed by secondary ion mass spectroscopy(SIMS) analysis. YCI, and YCl$_3$ existed at 126.03 a.m.u, and 192.3 a.m.u, respectively

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.236-241
• /
• 2005

The purpose of this study is to find out the source(s) and distribution of boron in Nak-dong River. In the year of 2002, the boron has been adopted as a toxic constituent for Korean drinking water standard. In this study, the analytical samples were collected at 11 stations in March, June, September and December 2002. These samples were analyzed by inductively coupled plasma-mass (ICP-MS) method. The recovery, relative standard deviation and method detection limit of the ICP-MS method for boron was $89{\sim}111.3%$, $2.21{\sim}3.81%$ and $5{\mu}g/L$, respectively. The distribution of boron was ranged $65{\sim}155{\mu}g/L$ in March, $26{\sim}125{\mu}g/L$ in June, $22{\sim}140{\mu}g/L$ in September and $50{\sim}162{\mu}g/L$ in December. The higher levels of boron were found at Kum-ho river nearby the industrial complex, which seemed to be greatly affected by domestic sewages and wastewater from the upper streams. Thus, the concentration of boron and that of other components showed strong statistical correlation in this area. In the Nak-dong River, industrial wastewater and domestic sewages is thought to be the sources of boron.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.12
• /
• pp.959-964
• /
• 2001

We investigated the etching characteristics of YMnO$_3$ thin films in high-density plasma etching system. In this study, YMnO$_3$ thin films were etched with CF$_4$/Ar gas chemistries in inductively coupled plasma(ICP). Etch rates of YMnO$_3$ increased up to 20% CF$_4$ in CF$_4$/(CF$_4$+Ar), but decreased with furthermore increasing CF$_4$ in CF$_4$/(CF$_4$+Ar). In optical emission spectroscopy (OES) analysis, F radical and Ar* ions in plasma at various gas chemistries decreased with increasing CF$_4$ content. Chemical states of YMnO$_3$ films exposed in plasma were investigated with x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). There is a chemical reaction between metal (Y, Mn) and F and metal-fluorides were removed effectively by Ar ion sputtering. YF$_{x}$, MnF$_{x}$ such as YF, YF$_2$, YF$_3$ and MnF$_3$ were detected using SIMS analysis. The etch slope is about 65$^{\circ}$ and cleasn surface. surface of the etched YMnO$_3$ thin films was investigated with X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). The etch profile was also investigated by scanning electron microscopy (SEM).EM).