• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권1호
• /
• pp.17-25
• /
• 2012

Purpose: Recently, a three dimensional approach to hard and soft tissues of the maxillofacial area has been widely used. This study was to evaluate the reproducibility and accuracy of a stereocamera compared to actual measurement methods using a digital caliper and digitizer. Methods: The stereoscopies of 7 head dummies with different sizes and shapes were obtained using a Di3D system (Dimensional Imaging, Glasgow, UK) after marking reference points on facial areas. From the obtained stereoscopy, 10 measurements representing the width, height and depth of each of the facial sections of the dummy were measured twice using a three dimensional reverse engineering software program (RapidForm$^{TM}$ 2006, Inus, Seoul, Korea). The x, y, and z coordinates of each of the three dimensional measurements were obtained and distances between two points were calculated. All procedures were repeated twice. The actual measurement method was performed twice, directly on dummies, using a digital caliper and values were compared with the previously determined values. Results: The results were as follows. In the ANOVA analysis, there were no significant statistical differences among the three measurement methods. In the Bonferroni analysis, with adjustments applied for multiple comparisons, there was no difference between actual measurement methods using a digitizer and a digital caliper. However, there was some difference between using a stereocamera and actual measurement methods using a digitizer and a digital caliper in values of $Ex_{Rt}-Ex_{Lt}$, $En_{Rt}-En_{Lt}$, $Ala_{Rt}-Ala_{Lt}$, $Ch_{Rt}-Ch_{Lt}$, G-Pg', $Ala_{Rt}$-Prn, $Ala_{Rt}$-Prn. The mean value for technical error in measurement (TEM) in Di3D (0.98 mm) was slightly higher than for a digital caliper (0.17 mm) and a digitizer (0.30 mm). In an intraclass correlation coefficient (ICC) there were no significant differences among the three measurement methods, but the Di3D system with the stereocamera showed relatively lower reproducibility compared to actual measurement methods using a digitizer and a digital caliper. Conclusion: These results indicate that some complementary measures may be needed to improve accuracy and reproducibility in the Di3D system with stereocamera.

• 무역상무연구
• /
• 제20권
• /
• pp.387-421
• /
• 2003

On the above, a comparison between preliminary draft conventions and comments by the Int'l Chamber of Commerce, contents of preliminary draft convention, problems and alternative are discussed. The conclusions are as follows thereof : The laws of MLEC and MLES made preparation for electronic era of CISG. But electronic circumstances are more changed than the time of regulation of them. Therefore the business world needs a stand-alone convention dealing broadly with the issues of contract formation in electronic commerce. At last, preliminary draft convention delivered a second round. But the base of the instrument was also MLEC and MLES. The revised preliminary draft convention is much amended beyond preliminary draft convention. At its forty-one sessions, the working group reviewed articles 1-11 of the revised preliminary draft convention presented by the secretariat. The remainder was pending until the time of its forty-two sessions. Therefore, on the base of deliberations and decisions of that sessions and them of thirty-six sessions of UNCITRAL, which will be held on comming november, the draft convention which will be prepared by the secretariate, be re-revised preliminary draft convention. According to review of working group on them, preliminary draft convention will officially be draft convention or revise by secretariate. Under these situations, my points of view on draft convention are as follows : As though e-UCP is used carring out side by side with UCP, after e-CISG making in order to adjust CISG to "on" transaction, it is very easy and prompt for business worked to use CISG with e-CISG. This will facilitate ratification of the CISG. For this case, I already presented contents of e-CISG. It is very important for the preliminary draft convention to deal specially with issues related to electronic contracting or to electronic transaction, because according to which way, its contents and scope of application will be different. But the revised draft convention is regretably compromising both them. Consequently, its contents are very confusing and we could not expect its success. If e-CISG will regulate, it is desirable that, if possible, working group has to make the general rule, and the making of useful, practical, affordable rule for electronic commerce, for example Uniform Customs and Practices for Electronic Commerce(e-UEC) in order to solve the specific practical problems, if any, which business currently faces regarding electronic contracting, has to entrust ICC. If working group want to make e-CISG, it is important not to hesitate and take a significant amount of time.

• 재활치료과학
• /
• 제9권4호
• /
• pp.69-81
• /
• 2020

목적 : 본 연구의 목적은 인지기능저하 노인을 선별할 수 있는 이중과제를 활용한 노인인지기능 선별검사를 개발하는 것이다. 연구방법 : 2019년 5월부터 8월까지 경기도 및 충청도에 있는 지역사회 기관에서 60세 이상 노인 229명을 대상으로 개발된 Y-DuCog(Yonsei Dual Task Cognitive Screening Test)의 신뢰도 및 타당도 검증과 인지기능저하 노인의 분류 기준점을 확인하였다. 결과 : MMSE-K, MoCA-K와 Y-DuCog와의 상관분석을 실시한 결과 Y-DuCog의 이중과제 효과와 이중과제 초당 정답 수에서 상관관계를 보였다. 내적 일치도 분석 결과 이중과제 효과와 이중과제 초당 정답 수의 Cronbach's-α 값은 각각 .848(p<.01), .916(p<.01)의 신뢰도를 보였고, 검사-재검사 신뢰도는 ICCs가 .969~.996으로 높게 나타났다. 선별기준점은 총 수행시간 DTE에서 31.76초를 기준으로 88.7%의 민감도와 83.5%의 특이도를, 총 이중과제 CRR에서 0.38개를 기준으로 84.5%의 민감도와 76.6%의 특이도를 보였다. 결론 : 본 연구를 통해 Y-DuCog의 신뢰도 및 타당도가 검증되었다. Y-DuCog는 기존 지필 평가의 제한점인 교육수준과 문자에 영향을 받지 않으며 간편하고 빠르게 검사를 시행할 수 있어 노인의 인지기능 평가 및 중재 방법에 대한 효과성 검증 시 사용될 수 있을 것으로 기대한다.

• 대한치과교정학회지
• /
• 제48권3호
• /
• pp.182-188
• /
• 2018

Objective: This study was performed to validate the autonomous maximal smile (AMS) as a new reference for evaluating dental and gingival exposure. Methods: Digital video clips of 100 volunteers showing posed smiles and AMS at different verbal directives were recorded for evaluation a total of three times at 1-week intervals. Lip-teeth relationship width (LTRW) and buccal corridor width (BCW) were measured. LTRW represented the vertical distance between the inferior border of the upper vermilion and the edge of the maxillary central incisors. Intraclass correlation coefficients (ICCs) for reproducibility, and the m-value (minimum number of repeated measurements required for an ICC level over 0.75), were calculated. Results: LTRW and BCW of the AMS were 1.41 and 2.04 mm, respectively, greater than those of the posed smile (p < 0.05), indicating significantly larger dental and gingival exposure in the AMS. The reproducibility of the AMS (0.74 to 0.77) was excellent, and higher than that of the posed smile (0.62 to 0.65), which had fair-to-good reproducibility. Moreover, the m-value of the AMS (0.88 to 1.05) was lower than that of the posed smile (1.59 to 1.85). Conclusions: Compared to the posed smile, the AMS shows significantly larger LTRW and BCW, with significantly higher reproducibility. The AMS might serve as an adjunctive reference, in addition to the posed smile, in orthodontic and other dentomaxillofacial treatments.

• 재활복지공학회논문지
• /
• 제11권2호
• /
• pp.157-163
• /
• 2017

본 연구의 목적은 국내에 거주하고 있는 뇌졸중 환자 및 일반인을 대상으로 국외에서 표준화된 운전 적합성 평가도구인 UFOV(Useful Field of View Test) 검사 도구의 신뢰도와 타당도를 분석하는 것이다. 2014년 10월부터 11월까지 서울시 소재 병원에 입원중인 뇌졸중 환자 19명과 일반인 23명을 대상으로 인구사회학적 정보와 UFOV 검사-재검사 신뢰도, 검사자간 신뢰도, UFOV와 TMT A&B, MVPT 점수를 비교한 동시타당도, 뇌졸중 환자와 일반인의 UFOV 검사결과로 판별타당도를 분석하였다. 그 결과 UFOV 검사의 검사-재검사 신뢰도는 하위항목 1~3에서 모두 .83(p<.01)이상을 보였으며, 검사자간 신뢰도(ICC=2,1)는 하위 항목 1~3에서 모두 .92(p<.001)이상을 보였다. 동시타당도를 알아보기 위한 TMT A&B, MVPT와 UFOV 검사의 세 하위항목과의 상관에서 모두 통계학적으로 유의한 관계를 보였으며, 판별타당도는 모든 항목에서 뇌졸중 환자와 일반인의 경우 통계학적으로 유의한 차이를 나타냈다(p<.001). 따라서 UFOV 검사는 작업치료 임상 분야에서 뇌졸중 환자의 운전사고 예방 및 운전능력을 평가하기 위한 도구로 사용될 수 있을 것이다.

• Journal of Acupuncture Research
• /
• 제31권1호
• /
• pp.61-73
• /
• 2014

Objectives : The purpose of this study is to estimate the test-retest reliability and the intratest repeatability in measuring the lumbar range of motion of healthy volunteers with wireless microelectromechanical system inertial measurement unit(MEMS-IMU) system and to discuss the feasibility of this system in the clinical setting to evaluate the lumbar spine movement. Methods : 19 healthy male volunteers were participated, who got under 21 points at oswestry disability index(ODI) were adopted. Their lumbar motion were measured with IMU twice in consecutive an hour for the test-retest reliability study. Intratest repeatability was calculated in the two tests separately. The calculated intraclass correlation coefficients(ICC) were discussed and compared with the those of the previous studies. Results : Lumbar range of motion of flexion $41.45^{\circ}$, extension $16.34^{\circ}$, right lateral bending $16.41^{\circ}$ left lateral bending $13.63^{\circ}$ right rotation $-2.47^{\circ}$, left rotation $-0.61^{\circ}$. ICCs were 0.96~1.00(intratest repeatability) and 0.61~0.92(test-retest reliability). Conclusion : This study shows that MEMS-IMU system demonstrates a high test-retest reliability and intratest repeatability by calculated intraclass correlation coefficients. The results of this study represents that wireless inertial sensor measurement system has portable and economical efficiency. By MEMS-IMU system, we can measures lumbar range of motion and analyze lumbar motion effectively.

• Journal of Acupuncture Research
• /
• 제30권4호
• /
• pp.25-33
• /
• 2013

Objectives : To assess the test-retest reliability and the intratest repeatability in measuring the cervical range of motion of healthy subjects with wireless microelectromechanical system inertial measurement unit(MEMS-IMU) system and to discuss the feasibility of this system in the clinical setting to evaluate the cervical spine musculoskeletal. Methods : 12 healthy people who were evaluated as no- or mild-disability with neck disability index were participated. Their cervical motion were measured with IMU twice in consecutive two days for the test-retest reliability study. Intratest repeatability was calculated in the two tests separately. The calculated intraclass correlation coefficients(ICC) were discussed and compared with the those of the previous studies. Results : Cervical range of motion data were acquired and statistically processed: left rotation($61.64^{\circ}$), right rotation($65.12^{\circ}$), extension($61.98^{\circ}$), flexion($52.81^{\circ}$), left bending($39.31^{\circ}$), right bending($41.08^{\circ}$). ICCs were 0.77~0.98(intratest repeatability) and 0.74~0.93 (test-retest reliability) in the primary motion. In the coupling motion, intratest repeatability ICCs were 0.93~ 0.99(transverse primary plane), 0.88~0.97(saggital primay plane), and 0.77~0.93(coronal primary plane). Test-retest reliability of coupling motion were 0.90~0.97(transverse primary plane), 0.00~0.72(saggital primary plane), and 0.04~0.76(coronal primary plane). Conclusions : Several types of range-of-motion devices are now on use in many fields including medicine, but the practicality of the devices in clinical use is questionable for the convenient and economical aspects. In this study, we presented the reliability of cervical range of motion test with the developed wireless MEMS-IMU system and discussed its potential utility in clinical use.

• 대한소아치과학회지
• /
• 제39권2호
• /
• pp.139-144
• /
• 2012

본 연구는 CBCT(Cone-beam computed tomography)영상에서 미맹출 치아 크기 측정의 재현성과 정확성을 평가하기 위해 시행되었다. 매복치를 주소로 부산대학교 치과병원 소아치과에 내원한 혼합치열기 환자 중 진단 목적으로 CBCT 채득에 동의한 환자의 미맹출 견치 및 소구치 69개를 대상으로 하였다. CBCT 영상에서 측정한 미맹출 치아의 최대 근원심 폭경 계측치와 동일한 치아가 구강 내로 완전히 맹출한 후 채득한 석고 모형에서 대상 치아를 digital caliper로 측정한 최대 근원심 폭경 계측치를 비교하여 다음과 같은 결론을 얻었다. 1. CBCT 영상에서 미맹출 치아를 계측하는 방법은 재현성이 높다(ICC=0.91). 2. CBCT 영상에서 측정한 미맹출 치아의 최대 근원심 폭경 계측치와 석고 모형에서 측정한 대상 치아의 최대 근원심 폭경 계측치는 높은 상관 관계가 있었다(r=0.91). 3. CBCT 영상에서 측정한 미맹출 치아 최대 근원심 폭경 계측치와 석고 모형에서 측정한 대상 치아의 최대 근원심 폭경 계측치는 통계적으로 유의한 차이가 있었다($p$ <0.05). CBCT 영상에서 측정한 미맹출 치아 최대 근원심 폭경의 계측치가 석고 모형에서 측정한 대상 치아의 최대 근원심 폭경 계측치보다 평균 0.2 mm 작게 측정되었다. 그러나 이러한 차이는 임상적으로 수용 가능한 수준이라 생각된다.

• Investigative Magnetic Resonance Imaging
• /
• 제20권2호
• /
• pp.81-87
• /
• 2016

Purpose: To analyze the feasibility of three-dimensional (3D) diffusion-weighted (DW) PSIF (reversed FISP [fast imaging with steady-state free precession]) sequence in order to evaluate peripheral nerves in the elbow. Materials and Methods: Ten normal, asymptomatic volunteers were enrolled (6 men, 4 women, mean age 27.9 years). The following sequences of magnetic resonance images (MRI) of the elbow were obtained using a 3.0-T machine: 3D DW PSIF, 3D T2 SPACE (sampling perfection with application optimized contrasts using different flip angle evolution) with SPAIR (spectral adiabatic inversion recovery) and 2D T2 TSE (turbo spin echo) with modified Dixon (m-Dixon) sequence. Two observers used a 5-point grading system to analyze the image quality of the ulnar, median, and radial nerves. The signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) of each nerve were measured. We compared 3D DW PSIF images with other sequences using the Wilcoxon-signed rank test and Friedman test. Inter-observer agreement was measured using intraclass correlation coefficient (ICC) analysis. Results: The mean 5-point scores of radial, median, and ulnar nerves in 3D DW PSIF (3.9/4.2/4.5, respectively) were higher than those in 3D T2 SPACE SPAIR (1.9/2.8/2.8) and 2D T2 TSE m-Dixon (1.7/2.8/2.9) sequences (P < 0.05). The mean SNR in 3D DW PSIF was lower than 3D T2 SPACE SPAIR, but there was no difference between 3D DW PSIF and 2D T2 TSE m-Dixon in all of the three nerves. The mean CNR in 3D DW PSIF was lower than 3D T2 SPACE SPAIR and 2D T2 TSE m-Dixon in the median and ulnar nerves, but no difference among the three sequences in the radial nerve. Conclusion: The three-dimensional DW PSIF sequence may be feasible to evaluate the peripheral nerves around the elbow in MR imaging. However, further optimization of the image quality (SNR, CNR) is required.

• 대한소아치과학회지
• /
• 제45권4호
• /
• pp.474-483
• /
• 2018

본 연구는 양육방식에 따른 어린이의 치과공포 차이와 부모/자녀 간의 치과공포 일치도에 대해 조사하고자 하였다. 전주시에 거주하는 총 801명의 8세와 11세 어린이와 부모를 대상으로 하였다. 부모들은 자택에서 자녀의 치과공포를 평가하는 Children's Fear Survey Schedule - Dental Subscale(CFSS-DS)와 4가지 양육방식에 대한 질문이 담긴 설문지를 작성하였다. 또한, 어린이들은 교실에서 CFSS-DS에 응답하였다. 권위적과 허용적 양육방식이 각각 53.4%, 45.8%를 차지하였다. 권위적과 허용적 양육방식의 부모는 자녀가 보고한 치과공포점수보다 각각 5.7점과 7.5점 높게 평가하였다. 8세에서만 권위적 양육방식의 어린이가 허용적 양육방식의 어린이보다 치과공포점수가 유의하게 3.9점 높았다(p = 0.002). 부모와 자녀 간의 치과공포일치도는 양육방식에 따른 차이는 없으나, 일치도에 대한 ICC 0.78로 중등도의 일치도를 보였다. 부모의 양육방식은 어린이의 치과공포와 관련이 있으며, 특히 권위적 양육에서 자란 8세 여자 어린이가 치과공포가 가장 높았다. 그러나, 나이가 증가하면서 부모의 양육방식이 자녀의 치과공포에 미치는 영향은 감소하였다.