• 대한기계학회논문집B
• /
• 제37권3호
• /
• pp.243-248
• /
• 2013

내연기관은 연료로 공급되는 에너지의 30~40%만을 동력에너지로 전환되고 나머지 60~70%는 손실에너지와 배기에너지로 버려지게 된다. 따라서 배기에너지를 회수한다면 기계적 에너지 또는 전기적 에너지로 변환시킬 수 있다. 열전발전기는 배기관에 위치하여 고온 열원과 저온 열원 사이에 온도차를 이용한다. 두 열원 사이에 온도차를 이용하여 전기적 에너지를 발생시켜 동력 에너지 등 여러 에너지로 변환 가능하다. 이 논문에서는 이러한 열전발전기의 특성을 예측하기 위해 수치해석을 통하여 여러 조건에 따른 열전발전기 특성을 예측하였다. 수치해석 결과 고온 열원과 저온 열원 간의 온도 차이가 클수록 발생하는 전력 역시 증가하는 것을 알 수 있었다.

• 전자공학회논문지T
• /
• 제35T권1호
• /
• pp.67-74
• /
• 1998

자동차 배기가스의 증가요인인 실화발생을 감지하고 실화가 발생하는 기통까지 판별하기 위하여 종래에는 크랭크각속도를 측정하는 방법을 이용하였으나 이 방법은 고속의 회전시 감지가 어려운 문제를 가지고 있다. 이러한 문제를 해결하기 위해서 본 논문은 이산 월쉬-푸리에(Walsh Discrete Fourier Transform; WDFT)를 이용하여 고속의 엔진회전수에서도 실화발생여부를 판단 가능하게 하였고, 월쉬함수의 Moving window방식을 이용하여 다기통 실화발생에 대한 기통판별까지 가능하게 하였다. 이상의 내용을 시스템으로 구현하여 무부하 Idle상태와 운전상태(Drive)에서 시험한 결과도 실화발생여부를 감지하는데 기존의 방법보다 더 효과적임을 알 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 추계 학술대회논문집
• /
• pp.63-69
• /
• 2001

The transient flow fields in direct injection engines were analyzed by using the STAR-CD CFD code during the intake/compression processes. The analyses were focused on the computation grid generation by using the IC3M code which is a pre-developed and especially well adapted for the analyses of internal combustion engines. The results showed that the used grid generation technique was well suited for the flow analyses on any internal combustion engines.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.1019-1025
• /
• 2006

Numerical simulations were conducted on the gerotor type oil pump. Three oil pump models having different port and groove shape were considered. Firstly, two original models (baseline & variant.1 model) were simulated in order to validate the accuracy of the simulation results and to better understand the flow characteristics in the pump. It was found that the cavitation phenomenon as well as the teeth tip leakage is most important parameter on the pump performance. Based on the simulation results of the original models, final model (variant.2 model) which has improved port shape and pressure relief valve is suggested to enhance pump performance and to reduce driving torque. The volumetric efficiency and the hydraulic torque of the Variant.2 model is improved 4% and reduced 6.1% each at 2000RPM in experiment.

• Transactions on Electrical and Electronic Materials
• /
• 제11권4호
• /
• pp.178-181
• /
• 2010

An automotive IC voltage regulator which consists of one-chip based on a metal-oxide semiconductor field effect transistor (MOSFET) is investigated experimentally with three types of packaging. The closed type is filled with thermal silicone gel and covered with a plastic lid on the MOSFET. The half-closed type is covered with a plastic case but without thermal silicone gel on the MOSFET. Opened type is no lid without thermal silicone gel. In order to simulate the high temperature condition in engine bay, the operating circuit of the MOSFET is constructed and the surrounding temperature is maintained at $100^{\circ}C$. In the overshoot the maximum was mainly found at the half-closed packaging and the magnitude is dependent on the packaging type and the surrounding temperature. Also the impressed current decreased exponentially during the MOSFET operation.

• 대한기계학회논문집B
• /
• 제39권11호
• /
• pp.843-851
• /
• 2015

질소산화물 저감에 사용하는 solid SCR용 고체상 암모늄 저장물질의 하나인 magnesium ammine chloride에 대한 실험실 규모에서의 제조방법과 제조한 물질의 분석연구를 수행하였다. 기저물질인 염화마그네슘에 암모니아 가스를 흡착하기 위한 실험조건의 도출을 위하여, Van't Hoff Plot으로 평형압 선도를 계산하였고, 간이반응기를 제작한 후, magnesium ammine chloride를 제조하였다. DA, IC, FT-IR, XRD, SDT 등으로 제조한 시료의 성분을 분석하였고, 제조한 시료에 수분이 존재한다는 것을 알 수 있었다. 암모니아 가스 흡착률을 증대하기 위하여 수분 제거에 적절한 새로운 실험방법을 제안하였고, 제안한 방법을 적용한 결과, 암모니아 가스의 흡착률이 대략 100%에 도달하였다.

• 한국자동차공학회논문집
• /
• 제23권2호
• /
• pp.199-207
• /
• 2015

Solid materials of ammonia sources with SCR have been considered for the application of lean NOx reduction in automobile industry, to overcome complex problems of liquid urea based SCR. These solid materials produce ammonia gas directly with proper heating and can be packaged by compact size, because of high volumetric ammonia density. Among ammonium salts and metal ammine chlorides, calcium ammine chloride was focused on this paper due to low decomposition temperature. In order to make calcium ammine chloride in lab-scale, simple reactor and glove box was designed and built with ammonium gas tank, regulator, and sensors. Basic test conditions of charging ammonia gas to anhydrous calcium chloride are chosen from equilibrium vapor pressure by Van't Hoff plot based on thermodynamic properties of materials. Synthetic method of calcium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%) from simple weight calculations which were confirmed by IC. Also, lab-made calcium ammine chloride were analyzed by TGA and DSC to clarify decomposition step in the equations of chemical reaction. To understand material characteristics for lab-made calcium ammine chloride, DA, XRD and FT-IR analysis were performed with published data of literature. From analytical results, water content in lab-made calcium ammine chloride can be discovered and new test procedures of water removal were proposed.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.8-14
• /
• 2007

Compression ignition of homogeneous charges in IC engines indicates possibilities of achieving the high efficiency of DI diesel engines with low level of NOx and particulate emissions. The objectives of this study are to further understand the characteristics of the HCCI(Homogeneous charge compression ignition) combustion and to find ways of extending the rich HCCI operation limit in an engine-like environment. DME fuel is supplied either in the form of premixture with air or directly injected in the combustion chamber of a rapid compression and expansion machine under the conditions of various equivalence ratio and injection timing. The cylinder pressure is measured and the rate of heat release is computed from the measured pressure for the analysis of the combustion characteristics. The experimental data show that the RCEM can operate without knock on mixtures of higher equivalence ratio, when DME is directly injected in the combustion chamber than introduced as a fraction of a perfect or nearly perfect premixture. Very early fuel injection timings usually employed in HCCI operation are seen to have only insignificant effects in control of ignition timing.

• 한국IT서비스학회지
• /
• 제19권1호
• /
• pp.17-35
• /
• 2020

The Korea government has been pursuing various policies to find a new industrial growth engine based on ICT (Industry and Communication Technology). However, ICT industry recently faces a serious crisis due to a lack of fundamental competitiveness and capital and technological gap with other countries. Accordingly, it is necessary for ICT industry to recognize the rapidly changing competitive business environment and to establish appropriate value-based strategies. This paper analyses factors affecting value-based strategy in the Korean ICT industry using 10 years data set. The result shows that the value-based strategy in the Korean ICT companies has a significant influence on their financial performance. In addition, it is confirmed that the competition level in the industry has a significant moderating effect on this relationship. In addition, when the companies are categorized based on performance, it is confirmed that there is a significant difference in competition level and value-based strategy in each categories. The results of this paper are expected to suggest implications for the effective use of balanced value-based strategies in the ICT industry.

• Advances in Energy Research
• /
• 제5권2호
• /
• pp.129-145
• /
• 2017

In this study, the use of a micro gas turbine system using biogas to supply heating, cooling and electricity loads of a rural building located in rural area around Tehran has been studied. Initially, the amount of energy needed by the farmhouse was calculated and then the number of needed microturbines was determined. Accordingly, the amount of substances entering biogas digester as well as tank volume were determined. The results of this study showed that village house loads including electrical, heating and cooling and hot water loads can be supplied by using a microturbine with a nominal power of 30 kW and $33.5m^3/day$ of biogas. Digester tank and reservoir tank volumes are $67m^3$ and $31.2m^3$, respectively. The cost of electricity produced by this system is 0.446 US$/kWh. For rural area in Iran, this system is not compatible with micro gas turbine and IC engine system use urban natural gas due to low price of natural gas in Iran, but it can be compatible by wind turbine, photovoltaic and hybrid system (wind turbine& photovoltaic) systems.