• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1086-1092
• /
• 2020

일상 환경에서 동작하는 자율 에이전트를 구현하기 위해서는 이미지나 객체에 존재하는 텍스트를 인식하는 기능이 필수적이다. 주어진 이미지에 입력 변환, 특성 인식, 워드 예측을 적용하여 인식된 텍스트에 존재하는 워드를 출력하는 과정에 다양한 딥러닝 모델이 활용되고 있으며, 딥뉴럴넷의 놀라운 객체 인식 능력으로 인식 성능이 매우 향상되었지만 실제 환경에 적용하기에는 아직 부족한 점이 많다. 본 논문에서는 인식 성능 향상을 위하여 텍스트 존재 영역 감지, 텍스트 인식, 워드 예측의 파이프라인에 OCR 엔진과 분류기로 구성된 애드온을 추가하여 기존 파이프라인이 인식하지 못한 텍스트의 인식을 시도하는 접근법을 제안한다. IC13, IC15의 데이터 셋에 제안 방법을 적용한 결과, 문자 단위에서 기존 파이프라인이 인식하는데 실패한 문자의 최대 10.92%를 인식함을 확인하였다.

• 한국음향학회지
• /
• 제40권6호
• /
• pp.571-577
• /
• 2021

본 연구는 기존의 엔진 없이 전기로 운행되는 자동차에 가상의 엔진소리를 구현해주는 반도체 에 관한 연구로, 운전자의 욕구 및 보행자의 안전을 지키기 위해 Adaptive Difference PCM(ADPCM) 방식과 Frequency modulation 방식을 조합하여 생생한 엔진음을 구현하였다. 또한 미디를 응용하는 전자음 합성 알고리즘을 제안하여 엔진음 합성방법, 엔진음 발생 시스템의 구성 모델을 제시한다. 본 연구는 운전자와 보행자를 모두 만족시키기 위해 캔 통신을 이용하여 운전자의 운전 습관에 따라 전해지는 엔진회전량, 차량 속도, 가속 페달 눌림 량, 토크 등의 정보를 받은 후, 미리 설정된 적절한 파라미터에 따라 주파수 변조를 위한 인터폴레이션, 정보량 축소를 위하 ADPCM 알고리즘, 엔진음을 쉽게 만들기 위한 미디 포맷을 이용하여 시스템과 운전자의 의도를 정확히 반영할 수 있는 인터렉션 알고리즘을 구현하였다.

• International Journal of Automotive Technology
• /
• 제2권4호
• /
• pp.147-155
• /
• 2001

Analysis of the thermodynamic cycle of IC engine from the point of view of economy and emissions was carried out. From this analysis potential capability of engine development was derived. This potential capability is lean-burn engine, fuelled with homogeneous mixture with $\lambda \geq$ 1.4. Several different modes of fuelling were proposed and tested on one-cylinder test engine from the point of view of extending lean operating limit of the engine, emissions and fuel economy. Among them were: fuelling with evaporated preheated gasoline, with gas (LPG evaporated) and with liquid butane. From these modes, fuelling with liquid butane injected to inlet port was selected and finally tested. This novel system of fuelling offered better than standard engine performances and emissions at lean operating limit. These results were validated on full-scale two-cylinder engine.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권6호
• /
• pp.755-760
• /
• 1999

To remove nitrogen oxides(NOx) in exhaust gas of diesel engine three-way catalytic process with plasma discharger has great possibilities. Characteristics of NOx removal depends on NO conver-sion to $NO_2$ and /or $HNO_3$ due to high activation energies for NO oxidation and reduction, NOx removal efficiency by using three-way catalytic with plasma discharger indicated about 50% at 40watt power consumption condition.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 춘계 학술대회논문집
• /
• pp.121-127
• /
• 2002

The transient flow fields in direct injection engine was analyzed by using the STAR-CD CFD code during the intake/compression processes. The grids are generated by using the IC3M. The CFD results were compared with experimental data. The results showed that the used techniques were well suited for the flow analyses on any internal combustion engines.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권4호
• /
• pp.54-60
• /
• 2001

This paper deals with control design method having anticipation delay which is proposed for the discrete nonlinear engine where system dynamics is not accurate. Due to the induction-to-power delay in internal combustion(IC) engine having abrupt torque loss, underdamping and chattering in engine idle speed becomes a serious problem and it could make drivers uncomfortable. For this reason, Three types of the closed-loop controller are developed for the stable engine idle speed control. The inputs of the controllers are an engine idle speed and air conditioning signal. The output of the controllers is an duty cycle to operate the idle speed control valve(ISCV). The proposed controllers will be useful for improving actual vehicles since these shows good test

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.992-997
• /
• 2003

The flow characteristics along a intake/compression process are very important for the combustion process. The intake/compression flow fields are related to the piston shape of engine. The flow fields are analysed by using the ICEM-CFD IC3M code for the rapid mesh-generation and by using the STAR-CD code for the calculations. The influences of the piston bowl shapes were investigated. The results showed that piston shapes had influences on a intake/compression flow and offered the definite basic data in a design side.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.96-103
• /
• 2005

One of the major problems limiting the accuracy of piezoelectric transducers fur cylinder pressure measurements in an internal combustion (IC) engine is the thermal shock. Thermal shock is generated from the temperature variation during the cycle. This temperature variation results in contraction and expansion of the diaphragm and consequently changes the force acting on the quartz in the pressure transducer An empirical equation for compensation of the thermal shock error was derived from consideration of the diaphragm thermal deformation and actual pressure data. The result indicate that the thermal shock equation provides reliable correction based on known surface temperature swing.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.289-294
• /
• 2006

Better fundamental understanding of the interactions between the in-cylinder flows and combustion process is an important requirement for further improvement in the fuel economy and emissions of internal combustion(IC) engines. Flow near a spark plug at the time of ignition plays an important role for early flame kernel development(EFKD). Velocity data measurements in this study were made with a two-component laser Doppler velocimetry(LDV) near a spark plug in a single cylinder optical spark ignition(SI) engine with a heart-shaped combustion chamber. LDV velocity data were collected on an individual cycle basis under wide-open motored conditions with an engine speed of 1,000rpm. This study examines and compares the flow fields as interpreted through ensemble, cyclic and discrete wavelet transformation(DWT) analysis. The energy distributions in the non-stationary engine flows are also investigated over crank angle phase and frequency through continuous wavelet transformation(CWT) for a position near a spark plug. Wavelet analysis is appropriate for analyzing the flow fields in engines because it gives information about the transient events in a time and frequency plane. The results of CWT analysis are provided and compared with the mean flows of DWT first decomposition level for all cycles at a position. Low frequency high energy found with CWT corresponds well with the peak locations of the mean velocity. The high frequency flows caused by the intake jet gradually decay as the piston approaches the bottom dead center(BDC).

• 한국전산유체공학회지
• /
• 제7권2호
• /
• pp.17-24
• /
• 2002

The transient flow fields in a direct injection engine was analyzed by using the STAR-CD CFD code doting the intake/compression processes. The analyses were focused on the computation grid generation by using the IC3M code which is a pre-developed and especially well adapted for the analyses of internal combustion engine. The results showed that the used grid generation technique was well suited for the flow analyses on any internal combustion engine.