• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.4
• /
• pp.9-19
• /
• 2008

In this paper, it is studied anti-collision algorithm based on the transmission protocol for RFID baseband system of the lSO/IEC 18000-6 Type-C regulation and designed the baseband part of RFID reader system using FPGA. To compensate this weak point of the slot random aloha algorithm which must have a long time to be dumped before deciding an appropriate slot size according to the number of surrounding tag, we suggested how to apply Bit By Bit algorithm to be able to recognize the tag when the tag is clashing. The design of the baseband part in the RFID reader system is accomplish by use of the ISE9.1i and I made an experiment on it targeting Spartan2. Construction verification is measured each block through Logic Analyzer and I can verify it has no error. I also compared and analyzed the performance between proposed algorithm and past algorithm and verified the improvement of performance.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.299-306
• /
• 2009

Followed by the popularity of the Internet, a number of access technologies to the Internet have been developed. EAP is an authentication framework. It is designed to provide the authentication functionality in the access network. Because of its flexibility and extensibility EAP poses a global solution for the authentication supported by many access networks. However, EAP has critical weaknesses in the protocol which may, in turn, decrease the EAP performance. Some of the weaknesses are caused by the "lock-step" flow control which only supports a single packet in flight. Considering the weaknesses, we propose a solution for the flow control. Using simulation we prove that our solutions improve the EAP performance.

• Journal of the Korean Chemical Society
• /
• v.56 no.2
• /
• pp.246-250
• /
• 2012

An efficient access, single step and environmentally benign synthesis of a new series of pyrazole containing isoxazolines derivatives were prepared by the condensation of chalcones bearing pyrazole moiety with hydroxyl amine hydrochloride in basic condition by using polyethylene glycol-400 (PEG) as a greener reaction solvent. The advantages of the present methodology are mild reaction condition and avoidance of volatile organic solvent. Furthermore, these newly synthesized compounds were screened for their antimicrobial activity against various pathogens like Escherichia coli (MTCC 2939), Salmonella typhi (MTCC 98), Staphylococcus aureus (MTCC 96), Bacillus subtilis (MTCC 441), Aspergillus niger (MTCC 281), Aspergillus flavus (MTCC 2501), Penicillium chrsogenum (MTCC 160) and Fusarium moniliformae (MTCC 156). Especially compound containing the hydroxyl group in C2-position and presence of halo (I, Br and Cl) groups as substituents at $C_3$ and $C_5$ position on the benzene nucleus showed the higher activity. Furthermore, compounds bearing methyl groups in combination with I and Br which enhanced the activity.

• Electronics and Telecommunications Trends
• /
• v.28 no.6
• /
• pp.133-140
• /
• 2013

기존의 센서 접속 기술은 그 분야에 띠라 다양한 표준과 규격이 존재하였다. 빌딩 자동제어 및 제어 네트워크용으로는 BACnet이 있으며, 공장제어 및 계측제어를 위한 Modbus 등이 다양한 프로토콜이 존재한다. 최근 M2M(Machine-to-Machine) 및 IoT(Internet of Things), WoT(Web of Things) 시대로 접어 들음에 따라 센서 및 각종 디바이스 간에 상호 통신할 수 있는 공통 프로토콜이 필요하게 되었다. IoT 프로토콜로 IEIF(Internet Engineering Task Force) CoAP(Constrained Application Protocol) 프로토콜이 핵심 역할을 하고 있으며, 차세대 센서 접속 프로토콜로 IETF CoAP이 많이 사용될 것으로 예상된다. 본고에서는 IETF CoAP 표준화 동향 및 규격에 대해 살펴본다.

• Journal of Sensor Science and Technology
• /
• v.16 no.4
• /
• pp.247-253
• /
• 2007

Low power consumption sensor network platform (sensor node) for sensor networking with IEEE 802.15.4 protocol was fabricated. The sensor node used ceramic bar type antenna for increasing RF signal performance and decreasing PCB size occupied by antenna. The communication range of the fabricated sensor node was about $20{\sim}30$ m in open environment with 915 MHz frequency bandwidth and well supported by Tiny OS. The sensor node have good connectivity with various external devices by RS-232, I2C, analogue and digital expansion board, hence, this sensor node can be applied to various applications in wireless sensor network and ubiquitous sensor network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.542-558
• /
• 2016

Vehicular Ad Hoc Networks (VANETs) are self-configuring networks where the nodes are vehicles equipped with wireless communication technologies. In such networks, limitation of signal coverage and fast topology changes impose difficulties to the proper functioning of the routing protocols. Traditional Mobile Ad Hoc Networks (MANET) routing protocols lose their performance, when communicating between vehicles, compromising information exchange. Obviously, most applications critically rely on routing protocols. Thus, in this work, we propose a methodology for investigating the performance of well-established protocols for MANETs in the VANET arena and, at the same time, we introduce a routing protocol, called Genetic Network Protocol (G-NET). It is based in part on Dynamic Source Routing Protocol (DSR) and on the use of Genetic Algorithms (GAs) for maintenance and route optimization. As G-NET update routes periodically, this work investigates its performance compared to DSR and Ad Hoc on demand Distance Vector (AODV). For more realistic simulation of vehicle movement in urban environments, an analysis was performed by using the VanetMobiSim mobility generator and the Network Simulator (NS-3). Experiments were conducted with different number of vehicles and the results show that, despite the increased routing overhead with respect to DSR, G-NET is better than AODV and provides comparable data delivery rate to the other protocols in the analyzed scenarios.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.3
• /
• pp.353-357
• /
• 2008

A series of studies has been conducted to establish a base infrastructure for an ovarian follicle culture system in the porcine and this study was designed to develop an effective retrieval protocol of preantral follicles. Five different methods using collagenase type I (A) or IV (B, C1, C2 and C3), which employed different treatment durations and/or conditions, were employed and sliced ovarian tissue of prepubertal gilts was provided for the retrieval. A significant increase in total number of follicles retrieved was detected when collagenase IV (methods B or C) was used. In total, more ovarian follicles were retrieved by method B undertaking agitation and method C2 without the agitation than method C1 and C3, while the number of preantral follicles collected was the largest in method B. Neither incubation in 5% $CO_2$ in air atmosphere instead of the agitation nor increased duration of enzymatic treatment up to 120 minutes improved the efficiency of follicle retrieval. There were no differences in the number of follicles retrieved from intact ovaries and from used ovaries for oocyte collection. These results demonstrate the collagenase IV treatment with agitation is effective for retrieving porcine preantral follicles from the ovaries.

• Mycobiology
• /
• v.34 no.2
• /
• pp.73-78
• /
• 2006

Inter-specific hybridization between Pleurotus pulmonarius and P. florida was attempted through PEG-induced protoplast fusion to select a fusant. The protocol for protoplast release, regeneration and fusion in these two Pleurotus species was standardized using the variables controlling the process. The mixture of mycolytic enzymes, i.e. commercial cellulase, crude chitinase and pectinase, KCl (0.6 M) as osmotic stabilizer, pH 6 of the phosphate buffer and an incubation time of 3 hours resulted in the maximum release of protoplasts from 3-day-old mycelia of P. florida ($5.3{\sim}5.75{\times}10^{7}$ protoplasts/g) and P. pulmonarius ($5.6{\sim}6{\times}10^{7}$ protoplasts/g). The isolated protoplasts of P. florida regenerated mycelium with 3.3% regeneration efficiency while P. pulmonarius showed 4.1% efficiency of regeneration. Polyethyleneglycol (PEG)-induced fusion of protoplasts of these two species resulted in 0.28% fusion frequency. The fusant produced fruiting bodies on paddy straw but required a lower temperature of crop running ($24{\pm}2^{\circ}C$) than its parents which could fruit at $28{\pm}2^{\circ}C$. The stable fusant strain was selected by testing for the selected biochemical markers i.e. Carbendazim tolerance and utilization of the lignin degradation product, vanillin.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.246-256
• /
• 2020

In the future Network Centric Warfare(NCW), changing to IPv6 based network environment is required to enable various future technologies such as the Internet of Things(IoT) and cloud technology which are expected to be introduced to the tactical network evolution. With the change to the IPv6 network, an ID/LOC(Identifier/Location) separation protocol that decomposes context of the IP address to location and identifier can enhance network capacity of increasing number of device and provide efficient mobility management in the tactical network that changes topology dynamically. In this paper, we choose ILNP(Identifier-Locator Network Protocol) as an ID/LOC separation for tactical network environment. In addition to ILNP-based tactical network design, this paper proposes a network-based mobility management scheme for providing efficient mobility management. Through numerical performance analysis, we show that the proposed scheme can reduce network loads more effectively than the conventional IP-based mobility management scheme and common handover procedure in ILNP.

• Journal of Ginseng Research
• /
• v.47 no.3
• /
• pp.366-375
• /
• 2023

Background: Ginseng contains three active components: ginsenosides, gintonin, and polysaccharides. After the separation of 1 of the 3 ingredient fractions, other fractions are usually discarded as waste. In this study, we developed a simple and effective method, called the ginpolin protocol, to separate gintonin-enriched fraction (GEF), ginseng polysaccharide fraction (GPF), and crude ginseng saponin fraction (cGSF). Methods: Dried ginseng (1 kg) was extracted using 70% ethanol (EtOH). The extract was water fractionated to obtain a water-insoluble precipitate (GEF). The upper layer after GEF separation was precipitated with 80% EtOH for GPF preparation, and the remaining upper layer was vacuum dried to obtain cGSF. Results: The yields of GEF, GPF, and cGSF were 14.8, 54.2, and 185.3 g, respectively, from 333 g EtOH extract. We quantified the active ingredients of 3 fractions: L-arginine, galacturonic acid, ginsenosides, glucuronic acid, lysophosphatidic acid (LPA), phosphatidic acid (PA), and polyphenols. The order of the LPA, PA, and polyphenol content was GEF > cGSF > GPF. The order of L-arginine and galacturonic acid was GPF >> GEF = cGSF. Interestingly, GEF contained a high amount of ginsenoside Rb1, whereas cGSF contained more ginsenoside Rg1. GEF and cGSF, but not GPF, induced intracellular [Ca²⁺]_i transient with antiplatelet activity. The order of antioxidant activity was GPF > GEF = cGSF. Immunological activities (related to nitric oxide production, phagocytosis, and IL-6 and TNF-α release) were, in order, GPF > GEF = cGSF. The neuroprotective ability (against reactive oxygen species) order was GEF > cGSP > GPF. Conclusion: We developed a novel ginpolin protocol to isolate 3 fractions in batches and determined that each fraction has distinct biological effects.