• 유통과학연구
• /
• 제16권5호
• /
• pp.71-81
• /
• 2018

Purpose - Our research aims to investigate the mediating effect of employee creativity on the relationship between intrinsic motivation and job performance using relationship using Chinese department salespeople samples. Another objective of this study is to be clear boundary conditions that strengthen or weaken the effects of intrinsic motivation on work outcomes (i.e., employee creativity and job performance). Drawing on JD-R theory, we suggest that the two types of coworker support play differential moderating roles in the intrinsic motivation, employee creativity relationship by increasing or decreasing job resources and demands in different ways. Research design, data, and methodology - This empirical study data were collected from gathered from a sample of full time salespeople in China. A total of 550 questionnaires were distributed and 300 responses were collected, indicating a response rate of 84.0%. Working with a sample of 300 salespeople working in a department store in China. SPSS 18.0, Process 2.16 Macro, and M-Plus 8.0 software were used in the data analysis. Descriptive statistics were used to evaluate the distribution of the employee profiles and correlations between variables. M-Plus 8.0 software was used to test the model fit, validity and reliability of the variables. Finally, all research hypotheses was estimated by SPSS Macro 2.16. Results - To test our research hypotheses, we employed an analytical strategy suggested by Hayes (2013; 2015) and Shrout and Bolger (2002). In this study, we tested the relationship between intrinsic motivation and job performance throughout employee creativity. Results showed intrinsic motivation and job performance was partially mediated by employee creativity. The positive relationship between intrinsic motivation and employee creativity when coworker emotional support was high than when it was low. In contrast, the positive association between intrinsic motivation and employee creativity was stronger when coworker instrumental support was low than when it was high. Coworker emotional and instrumental support further moderated the indirect effect of intrinsic motivation on job performance through employee creativity. Conclusions - This study extends the conceptual model and empirical researches in coworker supports literature by representing a fundamental mechanism of how salespeople's intrinsic motivation and job performance throughout employee creativity.

• 핵의학기술
• /
• 제18권1호
• /
• pp.153-157
• /
• 2014

Anti double-stranded DNA (Anti-ds DNA)항체의 검출은 SLE의 진단에 중요하며 American College of Rheumatologists의 SLE 진단기준에 포함되어 있다. 또한 SLE 질병의 활성도와 Anti-ds DNA 항체 수준의 상관성이 보고되어 있으며 Anti-ds DNA 항체 정량검사는 SLE의 치료 전, 후 추적에 매우 유용하다. Anti-ds DNA 항체의 검출을 위한 검사 방법으로 방사면역측정법(radioimmunoassay, RIA)을 이용한 Farr assay, Crithidia luciliae를 이용한 면역형광 측정법(immunofluorescence Test, CLIFT), 효소면역측정법(enzyme-linked immunosorbent assay, ELISA), 화학발광면역 측정법(chemiluminescence immunoassay, CLIA)이 있다. 본원에서 방사면역측정법(radioimmunoassay, RIA)으로 Anti-ds DNA 항체 검사 과정에서 lipemic한 검체의 경우 침전물의 형성이 원활하지 않거나 침전물도 같이 흡입되는 상황이 발생 하였고, 이러한 문제점을 해결하기 위해 lipemic 검체가 분석 결과에 미치는 영향 정도를 평가하였다. 2012년 9월부터 2013년 2월까지 Anti-ds DNA 항체 검사가 의뢰된 검체 중 lipemic한 검체(n=81)를 선택하여 마이크로 원심분리기로 전처리(고속 원심분리: 14,000 rpm 5 mins)한 후 동시에 Anti-ds DNA 항체 검사(Anti-ds DNA kit, Trinity Biotech, Ireland)를 시행하였다. 실험군 1 (lipemic 검체의 Anti-ds DNA 항체 농도 ${\leq}7IU/mL$)에서 y=0.3636x+4.7322, $R^2=0.0238$, Pearson 상관계수는 0.154, paired t-test (P=0.003), Difference (%) mean 65.7의 결과를 얻었으며 통계적으로 유의한 차이를 보였다. 그러나 실험군 2 (lipemic 검체의 Anti-ds DNA 항체 농도 ${\geq}8IU/mL$)에서 y=0.9837x+0.2982, $R^2=0.994$, Pearson 상관계수는 0.997, paired t-test (P=0.181), Difference (%) mean -5.53을 보였고 통계적으로 유의한 차이가 없음을 확인할 수 있었다. 임상에서 SLE (systemic lupus erythematosus)의 진단에 중요한 역할을 하는 Anti-ds DNA 항체 검사는 lipemic 검체의 영향을 배제하기 위해서 반드시 전처리(고속 원심분리: 14,000 rpm 5 mins) 과정을 통해 혈청 내 지질 성분을 제거한 후 검사를 시행하여야 한다.

• Korean Journal of Radiology
• /
• 제24권7호
• /
• pp.647-659
• /
• 2023

Objective: The study was conducted to investigate the effect of correct occlusion of the left atrial appendage (LAA) on intracardiac blood flow and thrombus formation in patients with atrial fibrillation (AF) using four-dimensional (4D) flow magnetic resonance imaging (MRI) and three-dimensional (3D)-printed phantoms. Materials and Methods: Three life-sized 3D-printed left atrium (LA) phantoms, including a pre-occlusion (i.e., before the occlusion procedure) model and correctly and incorrectly occluded post-procedural models, were constructed based on cardiac computed tomography images from an 86-year-old male with long-standing persistent AF. A custom-made closed-loop flow circuit was set up, and pulsatile simulated pulmonary venous flow was delivered by a pump. 4D flow MRI was performed using a 3T scanner, and the images were analyzed using MATLAB-based software (R2020b; Mathworks). Flow metrics associated with blood stasis and thrombogenicity, such as the volume of stasis defined by the velocity threshold ($\left|\vec{V}\right|$ < 3 cm/s), surface-and-time-averaged wall shear stress (WSS), and endothelial cell activation potential (ECAP), were analyzed and compared among the three LA phantom models. Results: Different spatial distributions, orientations, and magnitudes of LA flow were directly visualized within the three LA phantoms using 4D flow MRI. The time-averaged volume and its ratio to the corresponding entire volume of LA flow stasis were consistently reduced in the correctly occluded model (70.82 mL and 39.0%, respectively), followed by the incorrectly occluded (73.17 mL and 39.0%, respectively) and pre-occlusion (79.11 mL and 39.7%, respectively) models. The surfaceand-time-averaged WSS and ECAP were also lowest in the correctly occluded model (0.048 Pa and 4.004 Pa^-1, respectively), followed by the incorrectly occluded (0.059 Pa and 4.792 Pa^-1, respectively) and pre-occlusion (0.072 Pa and 5.861 Pa^-1, respectively) models. Conclusion: These findings suggest that a correctly occluded LAA leads to the greatest reduction in LA flow stasis and thrombogenicity, presenting a tentative procedural goal to maximize clinical benefits in patients with AF.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.1-6
• /
• 1976

This paper is the third one of the study on balanced type oscillating mole-drainer, the first one was presented in No 9. Gyeongsang College Report and the second one in Vol. 17, No.4 of the KSAE. In the first part of this study, the characteristics of traction forces between the nonoscillating earth working equipments and oscillating ones was compared. A model of the balanced type oscillating mole-drainer, which composed of a mechanism that may reduce the machine vibration, was designed following the dimensional analysis and similitude technique. The model test was carried out to clarify the balancing mechanism of the oscillating parts and other parts of the machine. In the light of the results from the model tests, a prototype machine was made for experimental purpose. Results from the field test by a reported in the near future. In the second report, the model tests were carried out under the same soil conditions, i.e, . oscillating frequency, running velocity, and oscillating amplitude, etc. It was clear that use of balanced type oscillating model could substantially reduce the vibration of the whole system of the machine, when compared with the nonoscillating type model. In this paper(the third report), results of investigation on the traction force, power requirement, and moment. etc, is presented. Analysis of variance technique was used for analyzing the effect of the frequency, amplitude, and running velocity on the draft force, torque, power requirements, and moments. The results obtained from the model tests are as follows, 1) By practicing a balanced-type oscillating mole-drainer, it was possible to reduce the traction resistance by 55.1-61. 2 percent of traction resistance, however, was 1.75 - 1.95 times greater than the value of resistance which was induced by use of a mole-drainer with single bullet. The resistance of rear shank against soil was considered as a main causing factor of the above results. 2) As the oscillation frequency was increased, the traction resistance was decreased. Considering on the effect of oscillation the greater the amplitude, and the slower the running velocity was, the greater the reduction ratio of traction resistance was. 3) The ratio of the traction resistance of oscillating mole-drainer to that of non-oscillating one could be represented as a function of dimensionless variable (V/$Af$). The results from the tests were well agreed with the reported results from the experim ents on oscillation plow or hoe. 4) By taking a lower value of (V/$Af$), reducing the traction resistance was possible. This fact meant, however, that the efficiency of mole drain practice would be lower. 5) It was experimentally confirmed under the same condition of soil that the variable (R/$rD1^3$) could be represented as a function of a variable($V^2/gD$) when a non\ulcornerocillating mole-drainer was used. 6) When a oscillating mole-drainer was used, the variable(R/$rD_1^{3}$) could be represented as a function of two variables ($v^2/gD_1$) and (V^2/gD_1$). 7) The torque was not affected by a change of frequency. However, a relation of proportionality existed between torque and amplitude, running velocity, and ratio of bullet diameter. When a balanced type oscillating mole-drainer with two bullets was used, torque was increased by 52.8-78. 4 percent and total power requirement was also increased. 8) Total power requirement was increased linearly in accordance with the increasing frequency, 41.96 percent of total power was used for oscillating action. The magnitude of total power requirement was 1. 8-9. 4 times greater than that of a non-oscillating mechanism. In the view point of power requirement, it was not advisable to increase the frequency, amplitude, running velocity, and ratio of bullet diameter at the same time. 9) Only the positive moment occured in the rear shank. Change of the diameter of a rear bullet, could not affect the balancing against the soil resistance. It was necessary for rear bullet to have a large resistance against soil only when the rear bullet was in backward motion. 10) Within an extent of the experimental base, optimum limits for several design factors were A=0.5cm, $f$=22.5Hz, V=O. 05m/sec, and $\lambda$=1.0 By adapting these values traction resistance was reduced by 40 percent and vibration acceleration wa s reduced by 60 percent. Even though the total , power requirements for operating a balanced type oscillation mechanism was greater ~than that of non-oscillating one, using a oscillating mechanism would be more effective. Because a balanced type oscillating mechanism is used, tractive resistance will be reduced and then the lighter . tractive equipment could be used.

• Toxicological Research
• /
• 제17권
• /
• pp.305-307
• /
• 2001

Toluene diisocyanate (TDI) is widely used in the manufacture of polyurethanes and is a recognized cause of occupational asthma. Although extensive investigations have been undertaken, the molecular mechanism(s) of the disease is still unclear. We hypothesized that inflammatory cytokines are required during both the sensitization and elicitation phases of the disease and have utilized TNF-R knock-out (KO) mice to address the hypothesis. Black C57 TNFR knock-out mice were exposed to TDI by sc injection and challenged by inhalation of 100 ppb TDI vapor. Control animals included: wild type C57 animals, sham-exposed animals that were challenged with TDI, and animals that were injected with anti-TNF antibodies prior to sensitization and again prior to challenge. Total IgE was increased in the knock-out animals compared with the wild type sensitized and challenged animals whereas TDI-specific IgG antibodies did not differ significantly in KO and wild type animals. There was less inflammation in the nares and trachea in KO animals compared with the wild type animals exposed to TD1 as well as less goblet cell hyperplasia and epithelial damage. Airway reactivity was assessed in animals treated with anti-TNF$\alpha$ antibody and found to be substantially reduced compared with that in sensitized and challenged animals. These results indicate that TNF$\alpha$ plays a role in the immunologic and physiologic responses and in airways inflammation in this animal model and suggests a role for TNF in occupational asthma due to TDI.

• Tribology and Lubricants
• /
• 제34권5호
• /
• pp.197-207
• /
• 2018

Thermal deterioration of fuel due to long-term storage influences engine performance and causes malfunctions. Fuel stability is usually evaluated via heat resistance and thermal stability during a brief heat shock at high temperature; storage stability in this scenario means that there is very little change in the quality of the fuel during long-term storage. In addition, rubber-based products such as oil seals, O-rings, and rubber hoses can influence the quality of the fuel. When these rubber products are in contact with fuel, they can swell, mechanically weaken, and occasionally crack, thus leaking low molar weight rubber and additives including plasticizer and antioxidant into the fuel to degrade its properties and shorten its useful lifetime. This study determines the thermal stabilities of three kinds of synthetic fuels by evaluating their low temperature kinematic viscosities, chemical composition changes via GC analyses, gross heat of combustion, and color changes. We evaluate the compression set of O-rings by immersing one NBR and two FKM rubber O-rings in the three synthetic fuel samples in airtight containers at variable storage temperatures for six months; from this, we estimate the lifetimes of the O-rings using the Power law model. There were very little changes in the chemical compositions and gross heat of combustion after six months of the experiment. The lifetimes are thus dependent on the materials of the rubber products, and in particular, the FKM O-ring was calculated to have a theoretical lifetime of 200 to 5,700 years. These results indicate that the synthetic fuels maintain their physical properties even after long-term storage at high temperatures, and the FKM O-ring is suitable for long-term sealing of these fuels.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.656-660
• /
• 2002

The fiber reinforced composite material is widely used in the multi-industrial field where the weight reduction of the infrastructure is demanded because of their high specific modulus and specific strength. Pressure vessels using this composite material in comparison with conventional metal vessels can be applied in the field where lightweight and the high pressure is demanded from the defense and aerospace industry to rocket motor case due to the merits which are energy curtailment by the weight reduction and decrease of explosive damage precede to the sudden explosion which is generated by the pressure leakage condition. In this paper, for nonlinear finite element analysis of E-glass/epoxy filament winding composite pressure vessel receiving an internal pressure, the standard interpretation model is developed by using the ANSYS 5.7.1, the general commercial program, which is verified as the accuracy and useful characteristic of the solution based on Auto LISP and ANSYS APDL. Both the preprocessor for doing exclusive analysis of filament winding composite pressure vessel and postprocessor that simplifies result of analysis have been developed to help the design engineers.

• 산업식품공학
• /
• 제23권1호
• /
• pp.7-15
• /
• 2019

연화 및 기능성 강화를 위한 함침기술 개발의 일환으로 돈육을 소금 용액에 함침시키는 공정에서 물과 용질의 이동에 미치는 함침 용액 농도의 영향과 Fickian model을 이용하여 이동 현상을 수식화하였고, 함침 후 시료의 전단력과 물성을 측정하였다. 소금 농도 6%를 기점으로 2.5%와 5%에서는 팽윤에 따른 수분의 이동으로 수화가 일어났으며, 10%에서는 수축이 동반되어 수화가 줄어들다가 결국 15%에서는 수분 이동 방향이 전환된 탈수가 확인되었다. 이러한 사실을 분석한 결과, 물질이동 방향은 11-14% 사이에서 전환되는 것으로 예측되었다. 즉, 5%에서 6시간 함침 후 수분함량은 12.68 g/100 g으로 가장 높았다. 용질의 이동은 함침액 농도와 함침 시간에 따라 증가하였다. 확산에 관한 Fick's의 제 2 법칙의 해석해를 이용하여 물과 용질에 대한 유효확산계수를 산출한 결과, 소금의 유효확산계수는 함침액 농도에 따라 증가하며 그 값은 2.43×10^-9에서 3.53×10^-9 m²/s 이었다. 반면 수분의 유효확산계수는 1.22×10^-9에서 1.88×10^-9 m²/s이었으나 농도에 따른 정확한 상관관계를 예측할 수 없었다. 즉, 확산모델은 용질의 이동에 대하여는 R²이 0.91 이상으로 잘 일치하지만 수분 이동에 관하여는 적합하지 못함을 알 수 있었다. 따라서 농도구배에 의한 구동력에 bulk flow의 원인이 되는 구동력을 포함하는 이론식이나 경험식의 연구가 필요하다고 사료된다. 함침 공정에 의해 대조군에 비하여 모든 농도에서 낮은 경도, 씹힘성 및 전단력 값을 나타내었고, 수분 보유가 가장 큰 5% 용액으로 함침 하였을 경우에 가장 낮은 값을 나타내어 함침 공정에 의한 연화 효과를 확인하였다.

• Journal of Radiation Protection and Research
• /
• 제33권1호
• /
• pp.13-20
• /
• 2008

석유 및 정유관련 산업에서 다중상(multi-phase flow) 유체의 배관 내 흐름은 일반적인 현상의 하나이다. 그러나 각각의 상에 대한 정확한 유량측정은 항상 정확한 결과획득을 얻는데 장애의 근원으로 작용하였다. 일반 상업용 유량계는 일정 이상의 기포가 포함된 유체 흐름의 경우 유량계측에 상당한 오차를 유발한다. 본 연구에서는 ${\gamma}$-ray attenuation 기법을 이용하여 clamp-on 타입으로 배관 외부에서 다중상 유체흐름의 유량 측정을 수행하였다. 사용된 밀봉 감마선원으로는 $^{137}Cs$ 20 mCi와 17 mCi 두 개의 동위원소를 사용하였으며, 감마선 검출기로는 $2"{\times}2"$ NaI(Tl) 섬광계수관을 이용하였다. 방사선 검출기로부터 데이터를 수집하고 각각의 데이터에 대해 푸리에 변환과 필터링을 통해 노이즈를 최소화하였다. 복원된 신호에 대해 상호상관함수(cross correlation function)를 적용하여 두 검출기 사이의 통과시간(transit time)을 측정함으로써 유량을 산정하였다. 배관 내 기포함량 측정을 통해 유량을 보정해줌으로써 측정유량의 정확도를 높였다. 두 선원간의 거리가 4D(D; inner diameter) 그리고 본 실험의 측정조건(N/S: $0.12{\sim}0.15$, sampling time ${\Delta}\;t$: 4msec) 하에서 기포량(단면적 대비 $6.1\;%{\sim}9.2\;%$) 보정을 통해 산정된 유량은 계측오차가 실제 평균유량 대비 1.7 % 이하인 정확도를 보였다. 또한 두 밀봉 감마선원 간의 거리가 가까울수록 통과시간 측정에 정확도가 향상되므로 보다 정확한 유량측정이 가능하였다. 본 연구를 통해 다중상 혼합유체의 유량을 밀봉감마선원과 상호상관 기법으로 이용하여 계측할 수 있음을 확인하였다. 방사성동위원소의 선택 및 계측시스템의 최적화 조건 등에 대한 추가연구가 수행된다면 석유화학 산업과 같은 장치산업의 유지관리 측면에 경제적으로 크게 기여할 수 있을 것으로 판단된다.

• 한국식품과학회지
• /
• 제35권5호
• /
• pp.818-824
• /
• 2003

외국농산물의 국내 유입증가와 이에 따른 신속한 원산지 판별법 확립이 요구되는 가운데 최근 수입이 급증한 품목 중 하나인 황기를 선택, CE 및 NIRS를 이용하여 분석조건을 확립하고 원산지판별에의 적용 가능성을 검토하였다. CE를 이용하여 분석 시 추출은 methanol: 0.1M phosphate buffer(pH 2.5)(3:7)를 사용하였으며 uncoated fused silica capillary$(50\;{\mu}m\;I.D.{\times}27cm)$를 이용하여 $45^{\circ}C$, 14 kV로 분석, 200 nm에서 검출하였다. 분석 buffer는 0.1 M phosphate buffer(pH 2.5)에 20% methoxy ethanol과 40 mM HSA를 첨가하여 사용하였으며, 8초간 pressure injection 하였다. Peak의 재현성을 증대시키기 위하여 시료 주입 전 분석 buffer를 1분간 분석 시와 같은 방향으로(F) 흘려주고 0.1 M phosphoric acid와 1 M sodium hydroxide는 각각 4분, 5분간 반대방향으로(R) 홀려주었다. 증류수를 다시 1분간 흘려주고(R) 분석 buffer로 2분간 평형화(F) 시킨 후 시료를 주입하였다. 이상의 조건으로 국내산(97점)과 수입(113점) 황기를 분석한 결과 전체 peak의 양상은 유사하였으나 약 $11{\sim}13$분에 용출되는 2개의 peak(peak am-1, am-2)의 면적 비율에서 차이가 나타나 국산은 peak am-2가 peak am-1의 약 4배인 반면, 수입 산은 10배로 나타나 원산지 판별이 가능하였으며, 약 80%의 편별율을 나타내었다. NIRS는 국산 및 수입산 황기 raw 스펙트럼의 2차 미분 스펙트럼 R값이 0.915로 비교적 안정된 값을 얻을 수 있었고, SEP는 약 14.3%로 나타났다. 이를 국산과 수입산 황기에 적용 시 전체 판별율이 약 97%로 비교적 높은 판별율을 보였다. 또한 NIRS로 판별이 불가능한 시료가 CE로는 판별이 가능하여 이 두 기기를 함께 사용 시 상호보완하여 신속 정확한 원산지 판별법의 개발 가능성이 시사되었다.