• Steel and Composite Structures
• /
• v.27 no.1
• /
• pp.1-12
• /
• 2018

This paper presents a semi-analytical solution of simply supported horizontally composite curved I-beam by trigonometric series. The flexibility of the interlayer connectors between layers both in the tangential direction and in the radial direction is taken into account in the proposed formulation. The governing differential equations and the boundary conditions are established by applying the variational approach, which are solved by applying the Fourier series expansion method. The accuracy and efficiency of the proposed formulation are validated by comparing its results with both experimental results reported in the literature and FEM results.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.3
• /
• pp.195-198
• /
• 2006

The identity crisis of preventive medicine appears to have been deepening. As a solution, it is insisted that preventive medicine should focus on clinical preventive medicine. However, in the field of heath policy and management, the better solution should be found in a serious search for visions and perspectives of its study on population and society. In this regard, the specialist who studies the field can be defined as a medical doctor majoring in public health. In this paper, I first forecasted major socioeconomic changes to occur in medical and public health arena and explored the role of those studying health policy and management. Secondly, I summarized their career paths and main activities in order to establish visions. Finally, I proposed curriculums on health policy and management for medical school undergraduates and for specialists majoring in preventive medicine, respectively.

• Steel and Composite Structures
• /
• v.4 no.1
• /
• pp.23-36
• /
• 2004

The inelastic lateral-distortional buckling of doubly-symmetric hot-rolled I-section beam-columns subjected to a concentric axial force and uniform bending with elastic restraint which produce single curvature is investigated in this paper. The numerical model adopted in this paper is an energy-based method which leads to the incremental and iterative solution of a fourth-order eigenproblem, with very rapid solutions being obtained. The elastic restraint considered in this paper is full restraint against translation, but torsional restraint is permitted at the tension flange. Hitherto, a numerical method to analyse the elastic and inelastic lateral-distortional buckling of restrained or unrestrained beam-columns is unavailable. The prediction of the inelastic lateral-distortional buckling load obtained in this study is compared with the inelastic lateral-distortional buckling of restrained beams and the inelastic lateral-torsional buckling solution, by suppressing the out-of-plane web distortion, is published elsewhere and they agree reasonable well. The method is then extended to the lateral-distortional buckling of continuously restrained doubly symmetric I-sections to illustrate the effect of web distortion.

• Journal of Sericultural and Entomological Science
• /
• v.40 no.2
• /
• pp.131-135
• /
• 1998

Changes of silk fibroin molecular weight was studied by enzymatic proteolysis and reverse reaction of enzymatic proteolysis (plastein reaction) using chromatography, X-ray diffraction and thermal analysis methods. When the treatment of enzymatic proteolysis with $\alpha$-chymotripsin to silk fibroin solution, a precipitate of Fcp fractions was formed. And, this was dissolved in LiBr aqueous solution, the precipitate of PIFcp fractions was obtained again. Fcp and PIFcp fractions showed silk IIand silk Itype structure, respectively. Fcp fractions was about 6,900 in molecular weight, PIFcp fractions obtained by plastein reaction on the precipitate of Fcp fractions increased molecular weight to abort 15,000. The molecular weight of Fcp fractions was increased by plastein reaction, but Fcp fractions almost transited to silk I type crystal. The structure of silk I type of PIFcp fractions was steady identified by X-ray diffraction and thermal analysis. As molecular weight of Fcp fractions was gradually low, PIFcp fractions was become to macromolecule little by little.

• Journal of the Korean housing association
• /
• v.2 no.2
• /
• pp.41-53
• /
• 1991

This study discussed the change of housing environmental problems from the early 1900s to the present.The reason is to find the solution of serious housing environment problems. The documentary research method was used for this study.Articles of content analysis(N= 1129)were published in 1920(the first edition)to December. 31, 1990 which were The Dong - A daily news article about housing environment. The main content of this study was examined the change, such as the number of whole article by time series and importance of article(column number of article), classification of article subject, and the number of article by subject. On the basis of this data, was made by chronological classification of the change of housing environment problems for 70 years. Since overall results will become supply of right information about housing environment to fur peoples, will provide the oppronment that oneself ran participate the protection of housing environment, and further will take a part solution of housing environment problems.At the future, I am going to design deep analysis of article content by subject.

• Bulletin of the Korean Chemical Society
• /
• v.1 no.3
• /
• pp.75-78
• /
• 1980

The interactions of iodine with toluidines (o-, m-, and p-) and N-methyltoluidines (o-, m-, and p-) in $CCl_4$ solution have been investigated through spectrophotometric measurements. The results indicate that toluidines and N-methyltoluidines form the one-to-one charge-transfer complexes with $I_2$ in solution. By comparing the values of the formation constants of the complexes, it is concluded that the relative stabilities of the $I_2$-amine complexes decrease in the following orders: p-toluidine >m-toluidine >aniline >o-toluidine, N-methyl-p-toluidine >N-methyl-m-toluidine >N-methylaniline >N-methyl-o-toluidine, N-methyltoluidines >toluidines. These results can be explained by the electron-releasing character and the steric effect of methyl group in the amine molecules.

• Membrane and Water Treatment
• /
• v.1 no.3
• /
• pp.215-230
• /
• 2010

Poly(vinylidene fluoride-co-hexafluoropropylene), PVDF-HFP, hollow fiber membranes were prepared by the dry/wet spinning technique using different polyethylene glycol (PEG) concentrations as non-solvent additive in the dope solution. Two different PEG concentrations (3 and 5 wt.%). The morphology and structural characteristics of the hollow fiber membranes were studied by means of optical microscopy, scanning electron microscopy, atomic force microscopy (AFM) and void volume fraction. The experimental permeate flux and the salt (NaCl) rejection factor were determined using direct contact membrane distillation (DCMD) process. An increase of the PEG content in the spinning solution resulted in a faster coagulation of the PVDF-HFP copolymer and a transition of the cross-section internal layer structure from a sponge-type structure to a finger-type structure. Pore size, nodule size and roughness parameters of both the internal and external hollow fiber surfaces were determined by AFM. It was observed that both the pore size and roughness of the internal surface of the hollow fibers enhanced with increasing the PEG concentration, whereas no change was observed at the outer surface. The void volume fraction increased with the increase of the PEG content in the spinning solution resulting in a higher DCMD flux and a smaller salt rejection factor.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.5
• /
• pp.90-96
• /
• 2011

Simultaneous removal of heavy metals (Cd, Pb) and diesel-fuel from a soil column was evaluated by respectively flushing with sodium dodecyl sulfate (SDS) solution, mixture of SDS and sodium iodide (SDS + NaI), and surfactant foam (SDS + NaI foam). First, this study evaluated these flushing methods to the heavy metals only-contaminated soil for removal of heavy metals from the heavy-metal only contaminated soil column. After 7 pore volume flushing of the soil column, Cd removal efficiencies from the soil were 40% by SDS solution, 50% by SDS + NaI mixture, and 60% by surfactant foam. The flushing results implied that anionic surfactant and ligand can be efficiently applied to extraction of Cd from the heavy metal contaminated soil. Furthermore, surfactant foam flushing showed an increased flushing efficiency with enhancing the contact between surfactant solution and soil. However, Pb removal efficiency by these flushing methods did not show any difference unlike those of Cd. Second, this study eventually evaluated flushing methods for simultaneous removal of heavy metals and diesel-fuel from the soil column with 7 pore volume flushing. Diesel-fuel removal efficiencies were 50% by SDS + NaI flushing and 90% by SDS + NaI foam flushing. Cd removal efficiency by the foam flushing reached to 80% which was higher than the result of the previous heavy metals onlycontaminated soil experiment. This result implied that diesel-fuel could act as a metal-solvent while it contacted to heavy metals present in the soil. This study clearly showed that surfactant foam flushing simultaneously removed heavy metals and diesel fuel from the soil column.

• Journal of Biosystems Engineering
• /
• v.15 no.4
• /
• pp.328-338
• /
• 1990

The objective of this study was to develop automatic systems of nutrient solution management for optimal nutrient solution environment and labor saving in water culture which enables factory crop production. In this study, an automatic control system and its driving program are developed to prepare, supply, and recover nutrient solution and to keep the optimal solution concentration level using microcomputers. Based on this study, the following conclusions are obtained: 1. The concentration measured by the system using oscillating circuit designed and built in this study, gave good agreements with the actual nutrient solution. 2. In water culture, the period of 12 hours for measuring concentration, pH, and temperature of the nutrient solution was optimum. Addition of control solution due to the decrease of the nutrient solution concentration is required in every 3 to 5 days. 3. It is estimated that the period of the whole solution change is 15 days, however, further research is needed to assure it. In addition, this period must be shortened in the future. 4. Both the hardware and software of the developed optimal nutrient solution control system in the water culture are working very well, however, it is necessary to develop a more economical one-chip micro controller to substitute for the microcomputer.

• Journal of Plant Biology
• /
• v.35 no.3
• /
• pp.247-252
• /
• 1992

The effect of iso-butanol on the electron transport rate of PS I and PS II was investigated in isolated spinach chloroplasts. In photosystem I, the rate of electron transport increased in the presence of 1 to 4% of isobutanol but decreased in 5 to 9% of iso-butanol. But in photosystem II, the rate of electron transport decreased when treated with 0.2 to 1% of iso-butanol. The inhibitory effect of isomers of butanol on PS II electron transport rate increased in the order of 2-butanol, tert-butanol, iso-butanol and I-butanol. This means that PS II activity was affected according to the arrangement of carbon atoms in butanol. The inhibitory effect of iso-butanol reduced when DPC was added in the solution. This means that iso-butanol affects PS II reduction side of thylakoid membrane primarily. The inhibitory effect of iso-butanol was reduced when $Mn^{2+},\;C^{2+}$ or BSA were added in the solution. PS II activity was restored when 1% iso-butanol treated chloroplast solution was diluted to twentyfold or when $Mn^{2+},\;C^{2+}$ or BSA was added to the diluted solution. However, the SDS-PAGE banding pattern of thylakoid membrane proteins was similar even in 2% iso-butanol treated chloroplasts and the control ones. Only in 5% iso-butanol treated chloroplasts these bands were very weak. These observations suggest that low concentrations of iso-butanol releases manganese and calcium ions from chloroplasts and inhibits the electron transport system. This inhibitory effect can be reversible in low concenterations but in high concentrations the inhibitory effect of iso-butanol become irreversible.rsible.