• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.446-454
• /
• 2016

In this paper, we present experimental results of the soil discharge characteristics as a function of moisture content when a 1.2/50-㎲ lightning impulse voltage is applied. For this study, laboratory experiments were carried out based on factors affecting the transient behavior in soils. The electrical breakdown voltages in soils were measured for a 0-6% range of moisture content for sand and a 0 - 4% range of moisture content for gravel. A test cell with semi-spherical electrodes buried face-to-face in the middle of a cylindrical container was used. The distance separating the electrodes is 100 mm. As a result, the time-lag to breakdown in soils decreases as the amplitude of applied voltage increases. The time-lag to initiation of ionization streamer is decreased, with an increase in the moisture content. However, the formative time-lag is rarely changed. The behavior of soil discharges depend not only on the type of soil and its moisture content but also on the amplitude of the impulse voltage. When the test voltage is applied repeatedly, electrical breakdown occurs along different discrete paths, leading radially away from the injected electrode. i.e., the fact that the ionization streamers propagate in different paths from shot to shot was observed.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.123-127
• /
• 2007

Up sizing of dye-sensitized solar cell(DSC) is the important technology to bring about commercialization of DSC. Several studies to obtain a stable large area DSC have been investigated in overseas laboratories, but have been hardly done in our country. In this study, up sizing technology of dye sensitized solar cells(DSCs) was investigated. We investigated low dark current materials for the current collecting grid. From the result, a new DSC module with metal grid was designed, and fabricated. For a new interconnection, both working and counter electrodes are alternately coupled on 10[cm]$\times$7[cm] substrate. We have achieved 68% of fill factor and photoelectric conversion efficiency of around 2.6% as the best results of new designed DSC structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1142-1145
• /
• 2004

ZnO surge arresters continuously endure the operating voltages during the operation course, and in the mean time, which need to withstand occasionally transient voltages of lightning and switching overvoltages. Under these voltages, the ZnO varistors inside arresters would have aging phenomena, one important result of aging phenomena is the increasing of resistive currents of varistors, which leads to the increasing of power losses of varistors. And the operating voltage is continuously applied on the ZnO varistors, there is a degradation phenomenon existing in ZnO varistors. When the degradation reaches a certain degree, then the arrester must stop operation. The degradation is related to the applied voltage ratio, the applied voltage ratio is high, the degradation is quickly. When the power loss is higher than the thermal dispersion ability of house of arrester, then the arrester will thermally breakdown. In this study the thermal stability characteristics of surge arresters for high power wil be discussed on the view point of watt losses and thermal breakdown.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.72-75
• /
• 2001

The solar energy is purity and infinity. Solar power converter were used to convert the electrical energy from the solar arrays to a stable and reliable power source. So much country research this solar energy system. The photovoltaic system is construct many solar cell array, In this paper, new implementation solar system was showed buck converter that V-I curve produced. This system can be used to study the short-term and long-term performances of solar cell and efficiency. This system is a far more cost effective and reliable replacement for field and outdoor flight testing. Study of buck converter, analysis and control shun t$\cdot$series connection characteristics of solar cell array.

• 조명전기설비학회논문지
• /
• 제22권9호
• /
• pp.32-39
• /
• 2008

본 논문은 뇌임펄스전압에 의한 토양의 이온화 현상과 모델접지시스템의 과도적 특성에 관련된 파라미터에 관한 것으로 건조 모래와 습한 모래에 대한 이온화 특성을 치수가 다른 동심원통형 전극계의 실험 용기를 이용하여 연구하였다. 결과로써, 높은 임펄스전압이 인가된 모래의 비선형 전기적 특성은 이온화 과정에 의해 발생하였다. 모래의 과도임피던스는 수분의 함유량과 인가임펄스전압의 크기에 의존하며, 수분의 함유량과 인가전압의 크기의 증가에 따라 접지임피던스는 감소하였다. 본 연구결과는 뇌서지에 대하여 우수한 성능을 가지는 접지시스템의 설계에 유용한 정보가 될 것이다

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2223-2228
• /
• 2009

Dye sensitized solar cells(DSCs) have been very economical and easy method to convert solar energy to electricity. DSC can reach low costs in future outdoor power applications. However, to commercialize the DSC, there are still many shortages to overcome such a low efficiency in a large size DSC. In this study, DSCs were fabricated by an electrospray coating method for the $TiO_2$ thin film. They were compared with DSCs prepared by conventional coating methods. We conducted an experiment to obtain the optimized parameters of voltage, flow rate, incident angle and distance in the electrospray method. After we fabricated $TiO_2$ film using that way, we investigated the characteristics of DSC through I-V Curve, SEM and EIS. This novel method shows stable performance with an energy conversion efficiency of 3.44 % under 1 sun illumination (AM 1, $P_{in}$ of $100\;mW/cm^2$).

• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.738-748
• /
• 2008

In this study, it has been investigated on the changing behavior of electrical properties in $ZnO-Bi_2O_3-Sb_2O_3$ (Sb/Bi=2.0, 1.0 and 0.5) ceramics. The samples were prepared by conventional ceramic process, and then characterized by I-V, C-V curve plots, impedance and modulus spectroscopy (IS & MS) measurement. The electrical properties of ZBS systems were strongly dependent on Sb/Bi. In ZBS systems, the varistor characteristics were deteriorated noticeably with increasing Sb/Bi and the donor density and interface state density were increased with increasing Sb/Bi. On the other hand, we observed that the grain boundary reacted actively with the ambient oxygen according to Sb/Bi ratio. Especially the grain boundaries of Sb/Bi=0.5 systems were divided into two types, i.e. sensitive to oxygen and thus electrically active one and electrically inactive intergranular one with temperature. Besides, the increased pyrochlore and $\beta$-spinel phase with Sb/Bi ratio caused the distributional inhomogeneity in the grain boundary barrier height and the temperature instability. To the contrary, the grain boundary layer was relatively homogeneous and more stable to temperature change and kept the system highly nonlinear at high Bi-rich phase contents.

• 약학회지
• /
• 제55권3호
• /
• pp.260-266
• /
• 2011

Two types of water soluble lysine salts of ibuprofen were prepared and evaluated. Physicochemical properties for ibuprofen-l-lysinate (IBL-l), ibuprofen-dl-lysinate (IBL-dl) and ibuprofen (IB) were studied on melting point, specific ratation, UV spectra and $^1H$-NMR spectra. There were not differences between IBL-dl and IBL-l in UV spectra and $^1H$-NMR spectra. The pharmacokinetic parameters of IB were compared to those of its lysine salts (IBL-l and IBL-dl) after i.v. or oral administration at the dose of 50 mg/kg (calculated as IB). Total body clearance ($CL_t$) and area under the plasma concentration-time curve (AUC) were not different between IB group and IBL groups after i.v. administration. On the other hand, IBL-l and IBL-dl produced peak plasma concentrations ($C_{max}$) significantly ealier and higher than IB. Time to reach peak concentration ($T_{max}$) after IBL administration was lower than that after IB administration. There was no difference in AUC across all different groups (IB, IBL-l and IBL-dl) after oral administration. However, absorption rate constant ($k_a$) of IBL-l and IBL-dl were significantly increased than that of IB. These results indicated that the administration of IBL-l and IBL-dl may be advantageous if rapid and reliable onset of pain relief is required.

• 센서학회지
• /
• 제7권1호
• /
• pp.67-72
• /
• 1998

Plused ArF excimer laser ablation과 열증착법에 의해 p형 Si 기판위에 PbTe/CuPc 박막을 증착하였다. 성장된 박막의 구조적, 전기적 특성은 XRD, 전류-전압 곡선등의 분석으로 행하였다. XRD 분석으로부터 PbTe박막과 CuPc 박막은 a 축의 배향성을 지닌 박막으로 성장하였음을 알 수 있었다. PbTe/CuPc/Si 박막의 광전특공을 조사하기 위하여 빛을 조사했을 때와 빛을 조사하지 않았을 때의 수직방향의 전류-전압 (I-V) 특성을 CuPc/Si, PbTe/Si 단층막의 특성과 비교 관찰하였다. PbTe/CuPc/Si 박막에서 단축 광전류 ($J_{sc}$)가 $25.46\;mA/cm^{2}$, 개회로 광전압 ($V_{oc}$)이 170 mV인 커다란 광기전력 특성을 나타내었다. 또한 양자효율 (QE)은 15 %, 광전변환효율 (${\eta}$)은 $3.46{\times}10^{-2}$로 측정되었다. QE와 ${\eta}$를 기초로 한 PbTe/CuPc/Si 접합과 광전류 과정은 CuPc 층에서의 광캐리어 생성, PbTe/CuPc 계면에 의 광캐리어 분리 그리고 PbTe층에서의 광캐리어 운송 역할이 효율적으로 수행된 결과임을 알 수 있었다.

• 전기화학회지
• /
• 제4권3호
• /
• pp.98-103
• /
• 2001

EDLC(electric double layer capacitor)용 활성탄소전극의 제조공정을 dip coating method, doctor blade coating method, paste rolling method로 달리하여 전기화학적 특성과 비축전 용량을 조사하였다. Dip coating method에 의한 전극제조시 전해질염으로 LiPF6를 이용하고 유기용매로 PC-DEC를 이용한 EDLC의 비축전 용량이 130F/g으로 가장 우수하였고, 선형의 시간전압곡선에서의 IR-drop도 0.11V로 작았으며 CV(cyclic voltammetry) 분석 또한 이상적인 EDLC의 특성을 나타내었다.