• Korea-Australia Rheology Journal
• /
• 제20권3호
• /
• pp.109-116
• /
• 2008

The effect of intermolecular aggregation induced by hydrophobic and electrostatic interactions on shear and elongational flow properties of aqueous acrylic thickener solutions is discussed. Complex shear modulus is determined at frequencies up to $10^4$ rad/s employing oscillatory squeeze flow. Extensional flow behavior is characterized using Capillary Break-up Extensional Rheometry. Aqueous solutions of poly(acrylic acid)(PAA)/poly(vinylpyrrolidone-co-vinylimidazole) (PVP-VI) mixtures exhibit unusual rheological properties described here for the first time. Zero-shear viscosity of the mixtures increases with decreasing pH and can exceed that of the pure polymers in solution by more than two orders of magnitude. This is attributed to the formation of complexes induced by electrostatic interactions in the pH range, where both polymers are oppositely charged. PAA/PVP-VI mixtures are compared to the commercial thickener Sterocoll FD (BASF SE), which is a statistical co-polymer including (meth) acrylic acid and ethylacrylate (EA) forming aggregates in solution due to "sticky" contacts among hydrophobic EA-sequences. PAA/PVP-VI complexes are less compact and more deformable than the hydrophobic Sterocoll FD aggregates. Solutions of PAA/PVP-VI exhibit a higher zero-shear viscosity even at lower molecular weight of the aggregates, but are strongly shear-thinning in contrast to the weakly shear-thinning solutions of Sterocoll FD. The higher ratio of characteristic relaxation times in shear and elongation determined for PAA/PVP-VI compared to Sterocoll FD solutions reflects, that the charge-induced complexes provide a much stronger resistance to extensional flow than the aggregates formed by hydrophobic interactions. This is most likely due to a break-up of the latter in extensional flow, while there is no evidence for a break-up of complexes for PAA/PVP-VI mixtures. These flexible aggregates are more suitable for the stabilization of thin filaments in extensional flows.

• 생태와환경
• /
• 제41권2호
• /
• pp.247-263
• /
• 2008

A two-dimensional (2D) reservoir hydrodynamics and water quality model, CE-QUAL-W2, is employed to simulate the hydrothermal behavior and density current regime in Andong Reservoir. Observed data used for model forcing and calibration includes: surface water level, water temperature, dissolved oxygen and suspended solids concentration. The model was calibrated to the year of 2003 and verified with continuous run from 2000 till 2004. Without major adjustments, the model accurately simulated surface water levels including the events of large storm. Deep-water reservoirs, like Andong Reservoir, located in the Asian Monsoon region begin to stratify in summer and overturn in fall. This mixing pattern as well as the descending thermocline, onset and duration of stratification and timing of turnover phenomenon were well reproduced by the Andong Model. The temperature field and distinct thermocline are simulated to within $2^{\circ}C$ of observed data. The model performed well in simulating not only the dissolved oxygen profiles but also the metalimnetic dissolved minima phenomenon, a common1y occurring phenomenon in deep reservoirs of temperate regions. The Root Mean Square Error (RMSE) values of model calibration for surface water elevation, temperature and dissolved oxygen were 0.0095 m, $1.82^{\circ}C$, and $1.13\;mg\;L^{-1}$, respectively. The turbid storm runoff, during the summer monsoon, formed an intermediate layer of about 15 m thickness, moved along the metalimnion until being finally discharged from the dam. This mode of transport of density current, a common characteristic of various other large reservoirs in the Asian summer monsoon region, was well tracked by the model.

• Imaging Science in Dentistry
• /
• 제48권3호
• /
• pp.177-184
• /
• 2018

Purpose: This study was performed to evaluate the influence of voxel size and the accuracy of 2 cone-beam computed tomography (CBCT) systems in the detection of vertical root fracture (VRF) in the presence of intracanal metallic posts. Materials and Methods: Thirty uniradicular extracted human teeth were selected and randomly divided into 2 groups(VRF group, n=15; and control group, n=15). The VRFs were induced by an Instron machine, and metallic posts were placed in both groups. The scans were acquired by CBCT with 4 different voxel sizes: 0.1 mm and 0.16 mm (for the Eagle 3D V-Beam system) and 0.125 mm and 0.2 mm (for the i-CAT system) (protocols 1, 2, 3, and 4, respectively). Interobserver and intraobserver agreement was assessed using the Cohen kappa test. Sensitivity and specificity were evaluated and receiver operating characteristic analysis was performed. Results: The intraobserver coefficients indicated good (0.71) to very good (0.83) agreement, and the interobserver coefficients indicated moderate (0.57) to very good (0.80) agreement. In respect to the relationship between sensitivity and specificity, a statistically significant difference was found between protocols 1 (positive predictive value: 0.710, negative predictive value: 0.724) and 3 (positive predictive value: 0.727, negative predictive value: 0.632) (P<.05). The least interference due to artifact formation was observed using protocol 2. Conclusion: Protocols with a smaller voxel size and field of view seemed to favor the detection of VRF in teeth with intracanal metallic posts.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2000년도 The 7th International Symposium
• /
• pp.64-65
• /
• 2000

Cancer is a general term subjected to a series of malignant tumor diseases which may affect many different parts of the human body. These cancer diseases are characterized by a rapid and uncontrolled formation of abnormal cells in the body. Cancer chemotherapeutic agents can often provide the prolongation of life and occasionally cures. To date many kinds of compounds have been obtained from plants kingdom as anti-neoplastic and anti-cancerous agents. However, there is no special type of compounds for cancer therapy. In our laboratory, anti-tumor and cytotoxic screenings on higher plants collected in Japan, China, Korea, Southeast Asia and South America have been done by using Sarcoma 180 ascites in mice, P388 lymphocytic leukemia in mice, Chinese hamster lung V-79 cells, P388 cells and nasopharynx carcinoma (KB) cells. The family, Simaroubaceae consists of about 20 genera and 120 species, mainly shrubs and trees, distributed in tropical and subtropical country. Simaroubaceae is classified as RUTALES, together with Rutaceae, Burseraceae, Meliaceae, Malpighiaceae and Polygalaceae. The members differ from the Rutaceae in not containing oil glands. Bitter principles are a characteristic of the family, Simaroubaceae. The genera include Quassia (Simarouba) (40 spp.), Picrasma (Aeschrion) (6 spp.), Brucea (10 spp.), Soulamea (10 spp.), Ailanthus (10 spp.) and Perriera (1 spp.) etc.. Surinam quassia derived from Quassia amara growing in Guianas, north Brazil and Venezuela is used in traditional medicines for stomachic, anti-amoebic, anti-malarial and anti-anaemic properties. Also, various parts of a number of plants of the family Simaroubaceae have been used in traditional medicine for the treatment of a variety oi diseases including cancer, amoebic, dysentery and malaria. Then, the research has established that it is the quassinoid content of these plants that is responsible for above activities. In this meeting, I will present on anti-tumor and anti-malarial activities and their active principles of Simaroubaceae plants, Eurycoma longifolia, Ailanthus vilmoriniana, Simaba cedron and Brucea mullis which have been studied in our laboratory.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.16-16
• /
• 2002

The presently commercialized lithium-ion batteries use layer structured LiCoO₂ cathodes. Because of the high cost and toxicity of cobalt, an intensive search for new cathode materials has been underway in recent years. Recently, a concept of a one-to-one solid state mixture of LiNO₂ and LiMnO₂, i.e., Li[Ni/sub 0.5/Mn/sub 0.5/]O₂, was adopted by Ohzuku and Makimura to overcome the disadvantage of LiNiO₂ and LiMnO₂. Li[Ni/sub 0.5/Mn/sub 0.5/]O₂ has the -NaFeO₂ structure, which is characteristic of the layered LiCoO₂ and LiNiO₂ structures and shows excellent cycleability with no indication of spinel formation during electrochemical cycling. Layered Li[Ni/sub x/Co/sub 1-2x/Mn/sub x/]O₂ (x = 0.5 and 0.475) materials with high homogeneity and crystallinity were synthesized using a mechanical alloying method. The Li[Ni/sub 0.475/Co/sub 0.05/Mn/sub 0.475/]O₂ electrode delivers a high discharge capacity of 187 mAh/g between 2.8 and 4.6 V at a high current density of 0.3 mA/㎠(30 mA/g) with excellent cycleability. The charge/discharge and differential capacity vs. voltage studies of the Li[Ni/sub x/Co/sub 1-2x/Mn/sub x/]O₂ (x = 0.5 and 0.475) materials showed only one redox peak up to 50 cycles, which indicates that structural phase transitions are not occurred during electrochemical cycling. The magnitude of the diffusion coefficients of lithium ions for Li[Ni/sub x/Co/sub 1-2x/Mn/sub x/]O₂(x = 0.5 and 0.475) are around 10/sup -9/ ㎠/s measured by the galvanostatic intermittent titration technique (GITT).

• 한국재료학회지
• /
• 제17권9호
• /
• pp.453-457
• /
• 2007

Interest in use of ink-jet printing for pattern-on-demand fabrication of metal interconnects without complicated and wasteful etching process has been on rapid increase. However, ink-jet printing is a wet process and needs an additional thermal treatment such as an annealing process. Since a metal ink is a suspension containing metal nanoparticles and organic capping molecules to prevent aggregation of them, the microstructure of an ink-jet printed metal interconnect 'as dried' can be characterized as a stack of loosely packed nanoparticles. Therefore, during being treated thermally, an inkjet-printed interconnect is likely to evolve a characteristic microstructure, different from that of the conventionally vacuum-deposited metal films. Microstructure characteristics can significantly affect the corresponding electrical and mechanical properties. The characteristics of change in microstructure and electrical resistivity of inkjet-printed silver (Ag) films when annealed isothermally at a temperature between 170 and $240^{\circ}C$ were analyzed. The change in electrical resistivity was described using the first-order exponential decay kinetics. The corresponding activation energy of 0.44 eV was explained in terms of a thermally-activated mechanism, i.e., migration of point defects such as vacancy-oxygen pairs, rather than microstructure evolution such as grain growth or change in porosity.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2000년도 제7차 국제 심포지움(생약자원개발에 관한연구) 및 추계정기 학술발표회 초록집
• /
• pp.11-13
• /
• 2000

Cancer is a general term subjected to a series of malignant tumor diseases which may affect many different parts of the human body. These cancer diseases are characterized by a rapid and uncontrolled formation of abnormal cells in the body. Cancer chemotherapeutic agents can often provide the prolongation of life and occasionally cures. To date many kinds of compounds have been obtained from plants kingdom as anti-neoplastic and anti-cancerous agents. However, there is no special type of compounds for cancer therapy. In our laboratory, anti-tumor and cytotoxic screenings on higher plants collected in Japan, China, Korea, Southeast Asia and South America have been done by using Sarcoma 180 ascites in mice, P388 lymphocytic leukemia in mice, Chinese hamster lung V-79 cells, P388 cells and nasopharynx carcinoma (KB) cells. The family, Simaroubaceae consists of about 20 genera and 120 species, mainly shrubs and trees, distributed in tropical and subtropical country. Simaroubaceae IS classified as RUTALES, together with Rutaceae, Burseraceae, Meliaceae, Malpighiaceae and Polygalaceae. The members differ from the Rutaceae in not containing oil glands. Bitter principles are a characteristic of the family, Simaroubaceae. The genera include Quassia (Simarouba) (40 spp.), Picrasma (Aeschrion) (6 spp.), Brucea (10 spp.), Soulamea (10 spp.), Ailanthus (10 spp.) and Perriera (1 spp.) etc.. Surinam quassia derived from Quassia amara growing in Guianas, north Brazil and Venezuela is used in traditional medicines for stomachic, anti-amoebic, anti-malarial and anti-anaemic properties. Also, various parts of a number of plants of the family Simaroubaceae have been used in traditional medicine for the treatment of a variety of diseases including cancer, amoebic, dysentery and malaria. Then, the research has established that it is the quassinoid content of these plants that is responsible for above activities. In this meeting, I will present on anti-tumor and anti-malarial activities and their active principles of Simaroubaceae plants, Eurycoma longifolia, Ailanthus vilmoriniana, Simaba cedron and Brucea mollis which have been studied in our laboratory.

• 한국환경복원기술학회지
• /
• 제19권3호
• /
• pp.11-27
• /
• 2016

This study is a survey of the flora distributed in Seocheon tidal flat wetland protected area of nearby island (Daejuk-do, Tokki-deung, Muk-do) and Yubo-do Seocheon-gun Chuncheongnam-do, Korea. The numbers of vascular plants were summarized as 231 taxa including 65 families, 167 genera, 204 species, 2 subspecies, 23 varieties and 2 forms. The halophytes were 33 taxa including 15 families, 29 genera, 29 species, 3 varieties and 1 form (Chenopodium album var. stenophyllum, Cnidium japonicum, Juncus haenkei and so on). The rare plants were 4 taxa including Pseudoraphis ukishiba (VU), Belamcanda chinensis (VU), Phacelurus latifolius (LC) and Polygonum bellardii (DD). The Korean endemic plants were 2 taxa including Salix pseudolasiogyne and Forsythia koreana. In the specific plants by floristic region were 24 taxa, a degree I were 19 taxa (Rhodotypos scandens, Zanthoxylum planispinum, Cynodon dactylon and so on), 2 taxa of a degree III (Elymus mollis and Asparagus oligoclonos), 3 taxa of a degree IV (Polygonum bellardii, Wisteria floribunda and Pseudoraphis ukishiba) and degree II, V were not found. The naturalized plants were 40 taxa including Phytolacca americana, Sicyos angulatus, Lactuca scariola and so on. Naturalization rate (NR) was 17.3% of all 231 taxa of vascular plants and urbanization index (UI) was 12.5% of all 321 taxa of naturalized plants. This study was performed to used as a basic data to identify the protected from plant ecosystems of type classify into analyze the vegetation characteristic of based on flora distributed in Yubu-do and nearby islands.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.141-141
• /
• 2010

The effect of thermal anneal on the characteristics of structural properties and the enhancement of luminescence and photovoltaic (PV) characteristics of silicon-rich silicon-nitride films were investigated. By using an ultra high vacuum ion beam sputtering deposition, B-doped silicon-rich silicon-nitride (SRSN) thin films, with excess silicon content of 15 at. %, on P-doped (n-type) Si substrate was fabricated, sputtering a highly B doped Si wafer with a BN chip by N plasma. In order to examine the influence of thermal anneal, films were then annealed at different temperature up to $1100^{\circ}C$ under $N_2$ environment. Raman, X-ray diffraction, and X-ray photoemission spectroscopy did not show any reliable evidence of amorphous or crystalline Si clusters allowing us concluding that nearly no Si nano-cluster could be formed through the precipitation of excess Si from SRSN matrix during thermal anneal. Instead, results of Fourier transform infrared and X-ray photoemission spectroscopy clearly indicated that defective, amorphous Si-N matrix of films was changed to be well-ordered thanks to high temperature anneal. The measurement of spectral ellipsometry in UV-visible range was carried out and we found that the optical absorption edge of film was shifted to higher energy as the anneal temperature increased as the results of thermal anneal induced formation of $Si_3N_4$-like matrix. These are consistent with the observation that higher visible photoluminescence, which is likely due to the presence of Si-N bonds, from anneals at higher temperature. Based on these films, PV cells were fabricated by the formation of front/back metal electrodes. For all cells, typical I-V characteristic of p-n diode junction was observed. We also tried to measure PV properties using a solar-simulator and confirmed successful operation of PV devices. Carrier transport mechanism depending on anneal temperature and the implication of PV cells based on SRSN films were also discussed.

• 한국약용작물학회지
• /
• 제25권6호
• /
• pp.381-388
• /
• 2017

Background: This study was conducted to acquire basic information on the phenotypic and genotypic characteristics of the germplasm of Panax ginseng C. A. Meyer collected from China and Korea, and identify the variations that can be utilized in ginseng breeding programs. Methods and Results: Quantitative parameters were evaluated, and used to compare and analyze on genetic polymorphisms in the germplasm. The genetic characteristics and classifications were compared and analyzed for each character. Stem length followed a normal frequency distribution ranging from 15.5 cm to 40.5 cm, with showing approximately 40% having a stem length of 20 - 30 mm. Stem diameters ranged from 2.7 mm to 11.3 mm. Stem number per plant ranged from 1 to 3; approximately 50% had a single stem, and 45% had two stems. A non-normal frequency distribution was observed for petiole number, with approximately 60% of the germplasm having 3 - 5 petioles. Petiole length exhibited a normal frequency distribution, raging from 4.5 to 10.6. Petiole angle in the germplasm ranged from $28^{\circ}$ to $89^{\circ}$ and seedstalk length ranged from 5.6 cm to 27.3 cm. Conclusions: The genetic polymorphisms identified by complete linkage clustering based on the quantitative characteristics of Panax ginseng C. A. Meyer collected from Korea and China were classified to 6 groups, namely I, II, III, IV, V, and VI with frequencies of 6.7%, 20.0%, 31.7%, 8.3%, 6.7%, and 26.7%, respectively.