• 대한후두음성언어의학회지
• /
• 제9권1호
• /
• pp.38-42
• /
• 1998

It has been reported that Tonsillectomy ＆ Adenoidectomy(T & A) resulted in the change of voice by structural changes directly to the vocal track. We studied the effect of T & A on the voice of patients comparing the pre-operative to the post-operative voice. It was performed using a Computerized Speech Lab(CSL50) which is currently used as a method for voice analysis. Forty-five patients who had T＆A, aging from 3 to 42 years old, took part in studies and wert evaluated for voice changes and the degree of formant changes of four basic vowels, /a/, /i/, /o/, and /u/. They were evaluated pre-operatively and post-operatively one month later using MDVP, CSL program of CSL50. The results obtained were as follows ; In using MDVP, there were some differences between pre-operative and post-operative shimmer measures within the normal range but other acoustic measures(Fo, jitter, NHR) show no significant differences(p>0.05). F3 of /a/ and /o/ were significantly decreased(p<0.05) and F2, F3 of /i/ were increased(p>0.05) in patients who only had Tonsillectomy in doing CSL spectrogram. For the patients who had T & A, Fl and F3 of /a/, F3 of /i/, Fl, F2 and F3 of /o/ were decreased with significant increase in F1 and F2 of /i/(p<0.05).

• 말소리와 음성과학
• /
• 제6권2호
• /
• pp.55-64
• /
• 2014

This study measured formant bandwidths of profound hearing impaired children and examined the characteristics of their articulation. For this study, 10 cochlear implanted children(CI), 10 hearing aid children(HA) and 10 normal hearing children(NH) were asked to read 7 Korean vowels(/ɑ, ʌ, o, u, ɯ, i, ɛ/). The subjects' readings were recorded by NasalView and analyzed by Praat. The analysis of the formant bandwidths explains the degree of vocal fold opening and the characteristics of radiation. Through the analysis of formant bandwidth, we can see that the hearing-impaired maintain vocal fold tension when they speak high vowels and characteristics of radiation. Narrower B1 means better maintain vocal fold tension, wider B2 means more front and wider B3 means the rounder lips. CI's B1 was widest and NH's was narrowest. And females' B1 was wider than males'. Among vowels, B1 of /a/ was widest, and B1 of /i/ was narrowest. In the case of B2, HA and NH's B2 was wider than CI's. Females' B2 was wider than males'. And B2 of /i/ was widest, and B2 of /ʌ/ was narrowest. In the case of B3, NH's was widest, and CI's was narrowest. Males' was wider than females'. Among vowels, B3 of /o/ was widest, and B3 of /ɛ/ was narrowest. As a result, first, through the analysis of B1, we can find that NH and males could better maintain vocal fold tension than the hearing-impaired or females, and all children articulate /i/ with vocal fold tension than other vowels. Second, through the analysis of B2, NH and HA articulate vowels with the weaker rounded than CI does. And females articulate vowels with the weaker rounded than males do. Third, through the analysis of B3, NH articulate vowels with the rounder than HA or CI do, and males articulate vowels with the rounder than females do. Through the results, we can expect that the analysis of formant bandwidth will be applied to the therapy of articulation for the hearing-impaired with hearing aids or cochlear implant.

• 한국세라믹학회지
• /
• 제25권1호
• /
• pp.27-34
• /
• 1988

In order to investigate the reason of changes in the physical properties of glasses near the region for which R(Ga/Na)=1, spectroscopic studies using FT-IR and Raman spectroscopy have been carried out on Na2O.2SiO2 glass with addition of Ga2O3 from 0 to 35 mole %, i.e., from R=0 to 1.61. The main purpose of this work is to investigate the coordination number of Ga3+ in glass with variation of glass composition and to determine the existence of tricluster in the Ga-rich region for which R>1.0 in Na2O-Ga2O3-SiO2 system.

• 한국벤처창업학회:학술대회논문집
• /
• 한국벤처창업학회 2022년도 춘계학술대회
• /
• pp.129-134
• /
• 2022

This research investigates the effect of SMEs' digital transformation (DX) efforts in O2O platforms on customer engagement. Among the three DX stages (i.e., digitization, digitalization, and DX), this study focuses on digitalization, a practically viable DX phase for SMEs using O2O platforms. This study categorizes the DX efforts of SMEs into three: information diversity, responsiveness to customers, and the degree of functional use. To analyze the impact of these efforts on customer engagement, we conduct the zero-inflated negative binomial regression using the dataset of Naver Smartplace, one of the representative O2O platforms in South Korea. The analysis result confirms that all three factors have positive impacts on customer engagement. Therefore, this study demonstrates that employing O2O platforms can be an effective strategy for SMEs lacking resources to achieve successful DX.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1363-1368
• /
• 1998

Mo/γ-Al2O3 catalysts were prepared by impregnation method in various conditions to identify the states of surface Mo species. TPR (Temperature-Programmed Reduction) and Raman spectroscopy were applied to analyze the surface Mo species. TPR analysis revealed that MoO3 was reduced to Mo through MoO2, the intermediate state and the increase of Mo loading enhanced the reducibility of Mo oxide till the formation of monolayer coverage. High temperature calcination induced oxygen defects in MoO3 giving their unstable states for easier reduction. Raman spectroscopy analysis showed that the increase of Mo loading induced the polymeric Mo oxide.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.784-789
• /
• 2004

Bulk ZnO varistor based on Matsuoka, which varied $SiO_2$ addition has fabricated by standard ceramic process. The micro-electrode, which fabricated for investigation on degradation property of the Single Grain Boundary of ZnO varistor, has sticked by lithography semiconductor process. The values of AC degradation has measured with 150% operating voltage in varistor threshold with 120 minute in 60Hz. In here we observed V-I and V-C property in every 30minute. The operating voltage of Single Grain Boundary has shown in variable patterns in the characteristic of V-I Property. By increasing the $SiO_2$ contents, operating value has also increased and dominated on degradation proper. In EPMA analysis, we know that added $SiO_2$ was nearly distributed at the Grain Boundary. $SiO_2$ has gradually distributed in Grain Boundary condition during the process of crystal growth. It contributes to degradation depression and decision of operating voltage. We also demonstrated for using practical application and performance on distribution random loop based on V-I Properties in Single-Grain-Boundary.

• 한국통신학회논문지
• /
• 제41권9호
• /
• pp.1108-1119
• /
• 2016

본 논문에서는 스마트폰의 저주파 대역 누설 전자파가 미치는 악영향을 분석하기 위해 스마트폰 모델별로 기본 동작에 따라 누설되는 30 MHz 이하의 누설 전자파 신호의 스펙트럼 특성 및 방사 패턴을 분석하였다. 사용자와의 직접적인 인터페이스를 담당하는 스마트폰의 입출력 센서 모듈(터치스크린, 카메라, 마이크 및 스피커 모듈)을 활성화시키는 4가지 기본 동작 모드에 의해 누설되는 전자파 신호를 상용 Near-Field 마그네틱 프로브를 통해 1cm의 격자 간격으로 정밀하게 측정하였다. 측정된 누설 전자파 신호를 분석한 결과, 스마트폰의 모델 및 동작 모드별로 누설되는 저주파 대역 전자파는 특이한 피크(Peak) 또는 하모닉(Harmonic) 피크 성분을 보이며, 동작 모드에 따라 각각의 입출력 센서 모듈이 활성화될 경우 해당 센서 모듈 및 메인보드 상의 AP(Application Processor), 메모리 주위로 상대적으로 강한 저주파 대역의 전자파가 누설되는 것을 확인할 수 있었다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
• /
• pp.115-119
• /
• 1998

Possibilities of substitution was investigated in the Langadite({{{{ {La }_{3 } {Ga }_{ 5}{SiO }_{14 }}}}}) system.{{{{{TiO}_{2 }}}}} was substitutes for{{{{{SiO}_{2 }}}}} followed by the substitution of{{{{{Nd}_{2 }{O}_{3}}}}}fo{{{{{La}_{2 }{O}_{3}}}}}. An effort to replace GeO2, which is reported to have been substitution for{{{{{SiO}_{2 }}}}} in the Langasit e system, for{{{{{TiO}_{2 }}}}} i n{{{{{ Nd}_{ 3} {Ga }_{5 } {TiO }_{14 } }}}} was also undertaken. In another experiment,{{{{{ Y}_{ 2}{ O}_{3 } }}}} was substituted for{{{{{ La}_{2 } {O }_{ 3} }}}}. All of substitution possibilities were investigated through solid state reactions and analyzed with XRD. Further analysis was carried out with an SEM. Lastly, the dielectric constants of the sintered body were measured.

• 한국철도학회논문집
• /
• 제8권5호
• /
• pp.425-433
• /
• 2005

For the design of welded bogie frame, the concept of multidisciplinary engineering activities, i.e. static, fatigue and dynamic analysis, has been applied, in which the sharing of design parameters related with each analysis and the collaboration of the working parts in charge should be fulfilled. However, in spite of these necessities, the multi-disciplinary engineering activities couldn't be performed in practice due to tack of the automation of the required analysis. In this paper, an automation of fatigue durability analysis of welded bogie frame according to UIC-Code was proposed by using the Model Center, which enables to integrate the several tools for the fatigue durability analysis, i.e. I-DEAS, ANSYS and BFAP, and to perform iterative analysis works in relation to the geometrical change of transom support bracket. Besides, the wrapping programs to control I/O-data and interfaces of these tools were developed. The developed automation technique brings not only significant decreasing man-hour required in the durability analysis, but also providing a platform of the multidisciplinary engineering activities.

• 동력기계공학회지
• /
• 제16권5호
• /
• pp.63-69
• /
• 2012

This paper presents an analysis on the induction heating of ring flange for wind farm. Ring flange is used for the connection of poles when building a column of wind power plant. Heat treatment of ring flange with the diameter of ${\O}1,000mm$ has been considered. For analysis on the induction heating, FEA is used. Firstly, electromagnetic filed analysis was performed to get the induction current distribution on the steel, After that, heat transfer analysis was performed using the magnetic filed analysis results. for more precise analysis, some measurement for permeability has been performed and the measurement data was used during the analysis. From the analysis, we get the temperature distribution on the ring flange.