• The Journal of the Petrological Society of Korea
• /
• v.20 no.1
• /
• pp.23-37
• /
• 2011

The scaling properties on the length distribution of microcrack populations from Tertiary crystalline tuff are investigated. From the distribution charts showing length range with 15 directional angles and five groups(I~V), a systematic variation appears in the mean length with microcrack orientation. The distribution charts are distinguished by the bilaterally symmetrical pattern to nearly N-S direction. The whole domain of the length-cumulative frequency diagram for microcrack populations can be divided into three sections in terms of phases of the distribution of related curves. Especially, the linear middle section of each diagram of five groups represents a power-law distribution. The frequency ratio of linear middle sections of five groups ranges from 46.6% to 67.8%. Meanwhile, the slope of linear middle section of each group shows the order: group V($N60{\sim}90^{\circ}E$, -2.02) > group IV($N20{\sim}60^{\circ}E$, -1.55) > group I($N60{\sim}90^{\circ}W$, -1.48), group II($N10{\sim}60^{\circ}W$, -1.48) > group III($N10^{\circ}W{\sim}N20^{\circ}E$, -1.06). Five sub-populations(five groups) that closely follow the power-law length distribution show a wide range in exponents( -1.06 - -2.02). These differences in exponent among live groups emphasizes the importance of orientation effect. In addition, breaks in slope in the lower parts of the related curves represent the abrupt development of longer lengths, which is reflected in the decrease in the power-law exponent. Especially, such a distribution pattern can be seen from the diagram with $N10{\sim}20^{\circ}E,\;N10{\sim}20^{\circ}W$ and $N60{\sim}70^{\circ}W$ directional angles. These three directional angles correspond with main directions of faults developed around the study area. The distribution chart showing the individual characteristics of the length-cumulative frequency diagrams for 15 directional angles were made. By arraying above diagrams according to the categories of three groups(A, B and C), the differences in length-frequency distributions among these groups can be easily derived. The distribution chart illustrates the importance of analysing microcrack sets separately. From the related chart, the occurrence frequency of shorter microcracks shows the order: group A > group B > group C. These three types of distribution patterns could reveal important information on the processes occurred during microcrack growth.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.4
• /
• pp.15-23
• /
• 2003

The purpose of this study is to construct e-Nonsan, a user friendly river quality management information system for Nonsan-si basin using GIS (geographical information system) technology. GIS was ideally suited featuring a geographical characteristics(e.g., industries, cattle sheds) and very effectively used in mapping and symbolization for the distribution of the spatial/periodic status(e.g., pie or column chart) of the point/non-point pollutant source loads which can be effectively applied to a information system on the web-site. And a user interface, GUI(graphic user interface) was designed very diversely and simply enabled the and non environmental experts connect with the system and obtain a useful information of river quality. e-Nonsan, a visual mapping system for river quality was developed by reframing the monitoring data as graphic symbols and it was ideally suited to exploring area-wide river quality at a user-friendly manner due to extensibility and scalability along the various survey points. Eventually the final step of this study was to construct e-Nonsan based on Web-GIS could be assessed anywhere if internet service is available and offer a very useful information services of the river quality to the publics.

• 한국해양학회지
• /
• v.24 no.2
• /
• pp.96-108
• /
• 1989

Applying the numerical scheme developed by Semtner (1974), we investigate the circulation system in the Japan Sea in response to the air-sea interaction and the wind. In spite of blocking straits, resulting surface circulation pattern is similar to the schematic surface current chart introduced by Uda(1934) and Naganuma (1972); the northward flow along the Korean coast and the anticlockwise gyre in the northeastern part of the Japan Sea. Also the southward current flows along the Korean coast at depth of 100-200 m as similar to the North Korean Cold Current suggested by Kim and Kim (1983). And the sinking phenomenon of relatively saline water in the northeastern part of the Japan Sea is similar to the formation of the Japan Sea Proper Water.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.181-189
• /
• 2002

This research presents an analytical model to investigate the stability due to the ball bearing waviness in a rotating system supported by two ball bearings. The stiffness of a ball bearing changes periodically due to the waviness in the rolling elements as the rotor rotates, and it can be calculated by differentiating the nonlinear contact forces. The linearized equations of motion can be represented as a parametrically excited system in the form of Mathieu's equation, because the stiffness coefficients have time-varying components due to the waviness. Their solution can be assumed as a Fourier series expansion so that the equations of motion can be rewritten as the simultaneous algebraic equations with respect to the Fourier coefficients. Then, stability can be determined by solving the Hill's infinite determinant of these algebraic equations. The validity of this research is proved by comparing the stability chart with the time responses of the vibration model suggested by prior researches. This research shows that the waviness in the rolling elements of a ball bearing generates the time-varying component of the stiffness coefficient, whose frequency is called the frequency of the parametric excitation. It also shows that the instability takes place from the positions in which the ratio of the natural frequency to the frequency of the parametric excitation corresponds to i/2 (i= 1,2,3..).

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.100-107
• /
• 2001

On the planning for the systematic management and control of the air pollution display methods were used to evaluate the spatial pollutant concentration status. This study were conducted to investigate the practical using of Geographic Information System(GIS) technology on the air pollution control and management which were computer-based systems that were used to store and manipulate geographic information in the macro city. In this study 137 samples were corrected by passive samplers and analysed by GC/MSD for 16 VOCs in Seoul (25 distincts) distributed by TM-coordinate(2 km$\times$2km), and finally displayed by Arciew program(version 3.2, ESRI Inc, USA) for windows. The concentration of benzene and toluene showed high level in whole area of seoul area of Seoul and distribution of butylbenzen, trothroloetylene, stylen showed high level in whole area of Seoul except a few distincts and the distribution of isopropylbenzene, 1,2-dichroloethane showed higher level in core area than that of Kangnam and Kangbuk area. In conclusion, products of this study of using GIS technology apply on the spatial distribution of VOCs concentration was very effective than that of other methods(e.g., contouring concentration method, pie or column chart, graduated symbols), especially in mapping and symbolization of pollution status evaluation.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.1921-1929
• /
• 1997

This paper describes a direct transmission method of multimedia data stream between a multimedia data processor and a communication interface without using system memory. I propose the direct transfer method of multimedia data through the single data path, without additional data path between a multimedia data processor and a communication interface in multimedia platforms. The hardware architecture and functions for the direct transfer method is defined. Procedure to transfer multimedia data to and from the multimedia data processor is described by means of control flow chart. Comparing the proposed method with general methods, I show that the proposed method can decrease number of bus accesses and bus cycles.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.83-95
• /
• 2018

With recent technological advances in the shipbuilding industry, vessels have been improved in size and performance. As a result, an accident such as grounding, caused by a single ship-to-ship collision, could lead to a large-scale maritime disaster. Considering the seriousness of the situation, the international community has been consistently updating the standards for Electronic Navigational Chart(ENC) to improve the maritime safety. S-57, the existing ENC standard governed by the International Hydrographic Organization(IHO), includes standards for generating conventional binary-type ENC data sets. The S-57 standard, however, has not been updated since the release of Version 3.1 in December 2000. Since then, the standard has failed to reflect technological development regarding maritime spacial information, which has been consistently improving. In an effort to address this concern, the IHO designated S-100, i.e., the next-generation ENC production standard. S-100 differs from S-57 in data exchange type. Contrary to the conventional ENC standards, which use binary-type data, S-10X, based on the next-generation ENC standards, uses ENC data composed of Feature Catalogue, Portrayal Catalogue, and GML. Considering this fact, it is necessary to update S-58, the ENC validation check standard, or designate a new standard for ENC validation checks. This study is developed own software to implement validation checks for new types of data, and identified improvement points based on the test results.

• Journal of electromagnetic engineering and science
• /
• v.5 no.2
• /
• pp.97-103
• /
• 2005

This paper describes the measured results of sonobuoy transmitting antenna system for anti-submarine warfare (ASW). Since radiation pattern and power density depend on impedance matching between transmitting RF part and antenna with termination resistance, design of matching circuit is very important for sonobuoy system performance. Matching circuit is designed by Smith chart using control of L and C. In standing wave ratio(SWR) measurement using Network Analyzer, SWR of antenna with matching circuit observed 1.5 below at the assigned VHF band. It shows very excellent performance comparison with conversional product that is used for the same object. The measured vertical and horizontal radiation patterns are also shown the satisfaction of military specifications. A drop out of sonobuoy system on the sea is happened when angle of elevation direction is over 10 degrees, and it is conformed that it takes less than I second return to original signal level. The required electric power density is $83\;mW/m^2$ in the military specification, and measured electric power density is observed over average $110\;mW/m^2$ at all frequency bands.

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.29-36
• /
• 1992

우리의 경제발전과 함께, 막구조 및 케이블구조를 이용한 특수 대공간 구조물이 더욱 더 늘어날 전망이며, 이들 구조물의 구조해석은 일반적인 범용ㅇ 구조해석 프로그램으로는 해석이 불가능하다. 즉, 대부분의 범용 구조해석 프로그램이 초기강성을 가진 구조물을 해석할 수 있는데 반해, 막구조 및 케이블 구조는 초기강성이 매우 약한 구조체이므로, 초기 불안정현상을 나타내고, 따라서 해석이 불가능하게 된다. 이러한 구조적 특징을 가진 막구조 및 케이블구조를 해석하기 위하여, 막 케이블 및 트러스요소로 구성된 복합구조체를 해석할 수 있는 범용 구조해석 프로그램인 McS(Membrane and Cable/Truss Structures)가 개발되었으며, 그 Flow-chart는 표1에서와 같다. McS는 현재, 한국에서는 성균관대학교 자연과학캠퍼스의 VAX-11, 1명진단조공업주식회사의 SUN 워크스테이션에서 작동중이며, 일본에서는 동경대학 생산기술연구소의 M-380 및 T.I.S. & Partners의 IBM 워크스테이션에서 작동중에 있다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.234-241
• /
• 1996

Trip-based material handling systems such as AGV systems, lift trucks, etc. are often designed with a given flow matrix (or FROM-TO chart) which is usually treated as the number of loaded trips that the devices must perform per unit time between the stations. In reality, the number of trips that would result from parts flow in a facility is dictated by the transfer batch size, i.e., the number of parts that are transferred from one station to the next in one trip. In this paper, we present analytical and simulation results aimed at determining optimal or near-optimal transfer batch sizes in manufacturing systems.