• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.867-876
• /
• 1987

Corrosion fatigue fracture with change in the grain size of M.E.F. dual phase steel is investigated in 3.5% NaCI aqueous solution at pH 2, 4, 6, 9, and 11. Generally speaking, decrease in corrosion fatigue life is strongly dependent on decrease in pH and slightly on the grain size. For the B material with the big grain size, the fatigue life is small due to its large reduction ratio of corrosion fatigue life. The influence of grain size on the reduction ratio of corrosion fatigue life is large at pH 11-6. Whi9le at pH 4-2 the reduction ratio of corrosion fatigue life only depends on the corrosion effect. The larger grain size and the lass pH result in the greater influence on corrosion fatigue crack propagation rate. As pH decreases, the plateau portion in the crack propagation rate curves of the B material are distinct. Crack propagation rate curves become slow down at high .DELTA.K range because crack closure effect by minute corrosion products inside crack causes the oxidation corrosion action less effective for a certain period of time. In A material with small grain size, fatigue life is increased in proportion with increase of martensite intergranular which brings forth restraining the crack propagation decreases crack propagation rate. Corrosion pit which is created in the surface of specimen is found at pH 6,4 and 2 which is noticeable and the unevenness of the surface of the specimen becomes severe as pH decreases. The unevenness of corrosion fatigue fracture surface is severe as the effect of pH increases i.e. as pH decreases. In proportion with increase in the grain size and decrease in pH, the aspect of brittle fracture becomes evident.

• The Journal of Korean Medicine
• /
• v.23 no.2
• /
• pp.198-210
• /
• 2002

Background : Asthma is a chronic inflammatory disorder under immunological influence. Shinbi-tang and Gamishinbi-tang are herbal decoctions used for treating asthma in traditional herbal medicine. Objective : To evaluate the effects of Shinbi-tang and Gamishinbi-tang on immune cell & serum OA-specific IgE in broncho-alveolar lavage fluid (BALF) in rat asthma model. Material and Methods : Rats were sensitized with ovalbumin (OA); at day 1 sensitized group and Shinbi-tang and Gamishinbi-tang groups were systemically immunized by subcutaneous injection of 1mg OA and 300mg of Al(OH)$_3$ in a total volume of 2ml. At the same time, 1 ml of 0.9% saline containing 6 x 10$^{9}$ B. pertussis bacilli was injected by i.p. 14 days after the systemic immunization, rats received local immunization by inhaling 0.9% saline aerosol containing 2%(wt/vol) OA. A day after local immunization, HAL fluid was collected from the rats. Rats were orally administered with each of Shinbi-tang and Gamishinbi-tang extract for 14 days from the day after local immunization. Lymphocyte, CD4+ T cell CD8+ T cell counts, CD4+/CD8+ ratio in BALF, change of serum OA-specific IgE level, CD4+ T cell CD8+ T cell percentages in the peripheral blood were measured and evaluated. Results : Shinbi-tang and Gamishinbi-tang showed an alleviating effect on asthmatic responses of rats. Shinbi-tang decreased total cell, lymphocyte, CD4+ T cell in BALF, serum OA-specific IgE level as compared with the control group. Gamishinbi-tang decreased total cell, lymphocyte, CD4+ T cell, and CD4+/CD8+ ratio in HALF as compared with the control group. CD4+/CD8+ ratio in HALF from Shinbi-tang group and serum OA-specific IgE level from Gamishinbi-tang group didn't show any significant variation from control group. CD8+ T cell in HALF, CD3+CD4+ T cell and CD3+CD8+ T cell percentages in peripheral blood showed no significant variation among groups. Conclusion : Shinbi-tang and Gamishinbi-tang alleviated asthmatic hypen-eactivity of the rat immune system through CD4+ T cell and serum IgE. Further the study of immune system modulating mechanism is expected.

• Journal of Nutrition and Health
• /
• v.15 no.4
• /
• pp.277-289
• /
• 1982

Because of a high degree of unsaturation of perilla seed oil vitamin E deficiency can be produced in chicks by using this particular oil diet. It is therefore convenient to use this oil for elucidating more detailed function (s) of vitamin E. The present study was undertaken to investigate the nutritional and pathological aspects both of high PUFA and of low vitamin E in the diet eventually to elucidate the function(s) of vitamin E. The present study examines the relationships between PUFA, vitamin E and Se in the experimental diets by measuring vitamin E levels both in serum and in liver and activities of SGPT and SGOT and by examining electron micrographs of the chick hepatocytes. Vitamin E concentrations in serum and liver responded to dietary treatments. Serum levels of vitamin E were more affected than those in liver, the values of groups IV(15% fat,- Vit.E) and V(15% fat,-Vit E,-Se) were significantly lower than those of groups I (5% fat) and 111 (15% fat) with P/S ratio of 1. The activities of SGOT and SGPT were found not to be different significantly among different diet groups. Electron microscopic observations of the chick hepatocyte revealed degeneration of mitochondria and appearance of vesicles in the cytoplasm of groups fed diets high in PUFA and deficient in vitamin E alone or deficient in both vitamin E and Se. In the same group pyknotic nuclei and deterioration of the sinusoidal border, showing diminution in microvilli were also observed. More detailed studies concerning biochemical aspects should be carried out by using radioisotopes both in the in vitro and in vivo systems and morphological study should have a focus on the changes in nucleus which seems already suggestive in the present observation.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.349-354
• /
• 1999

The temperature dependences of the Hall coefficient, carrier mobility, electrical resistivity, Seebeck coefficient, thermal conductivity, and figure-of-merit of the undoped and $CdI_2$-doped 90% $Bi_2Te_3-10% Bi_2Se_3$, single crystals, grown by the Bridgman method, have been characterized at temperatures ranging from 77K to 600K. The saturated carrier concentration and degenerate temperature of the undoped 90% $Bi_2Te_3-10% Bi_2Se_3$ single crystal are $5.85\times10_{18}cm^{-3}$ and 127K, respectively. The scattering parameter of the 90% $Bi_2Te_3-10% Bi_2Se_3$ single crystal is determined to b -0.23, and the electron mobility to hole mobility ratio ($\mu_e/\mu_h)$ is 1.45. The bandgap energy at 0K of the 90% <$Bi_2Te_3-10% Bi_2Se_3$ single crystal is 0.200 eV. Adding $CdI_2$as a donor dopant, a maximum figure-of-merit of $3.2\times10^{-3}/K$$CdI_2$-doped specimen.

• Atmosphere
• /
• v.20 no.4
• /
• pp.483-494
• /
• 2010

The vertical profiles of the extinction coefficient, the backscatter coefficient, and the lidar ratio (i.e., extinction-to-backscattering ratio) for Asian dust and pollution aerosols are determined from Raman (inelastic) and elastic backscatter signals. The values of lidar ratios during two polluted days is found between 52 and 82 sr (July 22, 2009) and 40~60 sr (July 31, 2009) at 52 nm, with relatively low value of particle depolarization ratio (<5%) and high value of sun photometer-derived Angstrom exponent (> 1.2). However, lidar ratios between 25 and 40 sr are found during two Asian dust periods (October 20, 2009 and March 15, 2010), with 10~20% of particle depolarization ratio and the relatively low value of sun photometer-derived Angstrom exponent (< 0.39). The lidar ratio, particle depolarization ratio and color ratio are useful optical parameter to distinguish non-spherical coarse dust and spherical fine pollution aerosols. The comparison of aerosol extinction profiles determined from inelastic-backscatter signals by the Raman method and from elastic-backscatter signals by using the Fernald method with constant value of lidar ratio (50 sr) have shown that reliable aerosol extinction coefficients cannot be determined from elastic-backscatter signals alone, because the lidar ratio varies with aerosol types. A combined Raman and elastic backscatter lidar system can provide reliable information about the aerosol extinction profile and the aerosol lidar ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.145-147
• /
• 2000

The secondary electron emission coefficient y of MgO single crystal according to the gas mix-ture ratio of Xe, $N_2$ to Ne have been investigated by $\gamma$-focused ion beam system. It is found that the MgO single crystals of (111) crystallinity has the highest $\gamma$ for operating Ne(Xe) ions ranging from 50eV to 200eV throughout this experiment. And it is found that the $\gamma$ for gas mixtures are much smaller than pure Ne ions.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1764-1770
• /
• 2020

The present work was mainly concerned with studying the operation of RC-phase shift oscillator based on MOSFET type 2N6660 under the influence of different temperature levels ranging from room temperature (25 ℃) up-to135 ℃ and gamma-irradiation up-to 3.5 kGy. In this concern, both the static (I-V) characteristic curves of MOSFET devices and the output signal of the proposed oscillator were recorded under ascending levels of both temperature and gamma-irradiation. From which, it is clearly shown that the drain current was decreased from 0.22 A, measured at 25 ℃, down to 0.163 A, at 135 ℃. On the other hand, its value was increased up-to 0.49 A, whenever the device was exposed to gamma-rays dose of 3.5 kGy. Considering RC-phase shift oscillator, the oscillation frequency and output pk-pk voltage were decreased whenever MOSFET device exposed to gamma radiation by ratio 54.9 and 91%, respectively. While, whenever MOSFET device exposed to temperature the previously mentioned parameters were shown to be decreased by ratio 2.07 and 46.2%.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.34-41
• /
• 2005

We report some recent results in the rewritable Blu-ray Disc with enhanced overwrite cyclability by using the growth dominant eutectic based Ge(Sb70Te30)+Sb recording layer, GeN interface layer and write strategy optimization. We have developed phase-change optical media with appropriate write strategy for 36(i.e., 1X)-72Mbps(i.e., 2X) dual speed Blu-ray Disc system and fur the future high speed optical data storage. For recording layer, eutectic-based Ge(Sb70Te30)+Sb material was used and Sb/Te ratio and Ge content were optimized to obtain proper erasability and archival stability of recorded amorphous marks. The recording layer is wrapped up in GeN interface layers to obtain overwrite cyclability and higher crystallization speed. In addition, we designed appropriate write strategy so called Time-Shifted Multipulse (TSMP) write strategy where starting position of multipulse parts are shined from reference clock. With this write strategy, the jitter characteristics of the disc was improved and we found that leading edge jitter was improved much more than trailing edge jitter in 1X-2X speed recording. Finally, we investigated the higher speed feasibility of 144Mbps(i.e., 4X) by adopting some elemental doping to the eutectic based Ag-In-Sb-Te recording layer and structural optimization of constitution layers in Blu-ray Disc. In the paper, we report the effect of Sn addition for the feasibility of higher speed recording. The addition of Sn shows increases of the crystallization speed of phase change recording layer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1522-1533
• /
• 2001

In this paper, we handle the estimation method of the received $E_{b}l1_{o}$ for forward closed-loop power control in cdma2000 systems. The estimation of MS-received $E_{b}l1_{o}$ utilizes the symbols related to the forward power control subchannel transmission. The estimation of the received bit energy and noise variance is analyzed for the frequency-selective Rayleigh fading channel. In order to improve SIR (signal-to-interference), the estimation of the received bit energy is made by the coherent combining of the rake-fingers and received I/Q symbols. And, in this paper, we evaluate the performance of forward closed-loop power control according to the mobile speed and the power adjustment step size in terms of the bit error rate (BER) and power control error. Simulation results present the optimal power adjustment step sizes according to the mobile speeds.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1202-1211
• /
• 2018

In this paper, induction machine operation efficiency and torque is improved using Machine Learning based Gene Optimization (ML-GO) Technique is introduced. Optimized Genetic Algorithm (OGA) is used to select the optimal induction machine data. In OGA, selection, crossover and mutation process is carried out to find the optimal electrical machine data for induction machine design. Initially, many number of induction machine data are given as input for OGA. Then, fitness value is calculated for all induction machine data to find whether the criterion is satisfied or not through fitness function (i.e., objective function such as starting to full load torque ratio, rotor current, power factor and maximum flux density of stator and rotor teeth). When the criterion is not satisfied, annealed selection approach in OGA is used to move the selection criteria from exploration to exploitation to attain the optimal solution (i.e., efficient machine data). After the selection process, two point crossovers is carried out to select two crossover points within a chromosomes (i.e., design variables) and then swaps two parent's chromosomes for producing two new offspring. Finally, Adaptive Levy Mutation is used in OGA to select any value in random manner and gets mutated to obtain the optimal value. This process gets iterated till finding the optimal value for induction machine design. Experimental evaluation of ML-GO technique is carried out with performance metrics such as torque, rotor current, induction machine operation efficiency and rotor power factor compared to the state-of-the-art works.