• Korean Journal of Materials Research
• /
• v.4 no.5
• /
• pp.566-573
• /
• 1994

The diamond synthesis by combustion flame method is considerably affected by the substrate surface temperature and its distribution which are mainly controlled by the ratio of mixed gas, $O_2/C_2H_2$. In order to elucidate the role of gas ratio in the diamond synthetic process by combustion flame, under various gas ratios (R=0.87~0.98; R=ratio of flow-rate of $O_2/C_2H_2$ gas) the substrate temperature was measured by using thermal video system and the morphological change of diamond crystals was analysed by using SEM, Raman spectroscope, and X-ray diffraction method. With increasing the gas ratio, i.e., decreasing the hydrocarbon content, the nucleation rate of diamond crystal was lowerd. It was also found that the morphology of diamond crystals changed from the cubo-octahedron type consisting of (100), (111) plane to the octahedron type of (111) plane. The increase of the substrate temperature consistently resulted in the increase of the nucleation rate as well as the growth rate of diamond crystals in which the surface of diamond crystal dominantly consisting of (100) plane.

• Journal of Biosystems Engineering
• /
• v.31 no.4 s.117
• /
• pp.363-368
• /
• 2006

The effects of germinating types and treatments of acetic acid, water-soluble and water-insoluble chitosan on the germination ratio and sprout length of brown rice were investigated in this study. The treatment of 0.001% acetic acid improved the germination ratio and sprout growth of brown rice in the germinating types of a air-exposure method after water-soaking (Type II) and a repetitive method of water-soaking & air-exposure (Type III), not water-soaking method (Type I). The treatment of water-soluble chitosan with higher concentration caused higher germination ratio and faster sprout growth. The treatment of water-insoluble chitosan repressed the germination and the sprout growth of brown rice. The germination ratios of brown rice germinated by the Type III were higher than those by Type I and Type II for all the treatments of acetic acid and water-soluble & water-insoluble chitosan as more than 97% germination ratio. Also, the Type III method accelerated the sprout growth of brown rice compared with Type I and Type II.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.2
• /
• pp.100-104
• /
• 1989

This study was carried out in order to develop a compound fertilizer for raising rice seedling in trays. A compound fertilizer, a trail product, was manufactured using the major fertilizer sources of ammonium sulfate, diammonium phosphate and potassium chloride in combination with zeolite and glutamic acid fermentation waste. Besides, polyacrylamide for slow release control of the fertilzer and Tachigaren and sulfuric acid for reducing the occurrence of seedling rot were used. The component ratios of N, $P_2O_5$ and $K_2O$ of trial product were 4.19, 5.41 and 4.05 percent respectively. The dissolution rate of nitrogen component in water for the trial product with polyacrylamide was lower about fifteen percents than the product without polyacylamide in six hours. Hymexazole, main component of Thachigaren, from the product was released about 86.2 percents in forty eight hours. When the product with polyacylamide applied on red earth soil and paddy soil, the pH of soil ranged from 4.6 to 5.4 for 25 days experiment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.2
• /
• pp.72-77
• /
• 1993

This study was conducted to evaluate coated urea complex fertilizer (CUC) application for rice growth and its grain quality on clay loam (Deogpyeong series) and sandy loam (Gangseo series) in southern region of Korea, 1992. The coated urea complex fertilizer used in the experiment was CUC I and II. The CUC I is a complex fertilizer consisting of 18-12-13 for $N-P_2O_5-K_2O$ including 50% of coated urea as nitrogen source, and CUC II is the same complex fertilize as mentioned above but it contains 25% of coated urea. Seventy percent of conventional fertilizer for nitrogen level was applied as basal dose of side-band placement (SBP) and whole plowlayer placement (WPP). Greenish degree of rice leaf color at the late growth stage was high in CUC plots regardless of application method and soil series. Amount of nitrogen uptaken by the rice plant at harvesting stage was mush more in the CUC treatment compared to convential fertilizer, and also much more in CUC I than that of CUC II. In the WPP on clay loam, harvest index of CUC treatment was showed very low level, which was reduced more in CUC II plot. In the CUC treatments, perfect rice grain ratio decreased remarkably, and the notched-belly rice kernel ratios among imperfect rice grain increased drastically. In rice grain, Hon-value(Mg to K.N ratio) decreased, protein and amylose contents increased in CUC application plots in WPP. In addition, gel consitency and alkali spreading value related to eating quality in CUC plots were getting longer and lower, respectively. The yield in CUC plot was similar to conventional fertilizing, but significant decreased in SBP. As a result, the rice grain quality became poor with the coated urea complex fertilizer application, but it could be improved by incorporation with fast-release fertilizer.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.177-193
• /
• 2009

The Samgwang deposit consists of eight massive mesothermal quartz veins that filled NE and NW-striking fractures along fault zones in Precambrian granitic gneiss of the Gyeonggi massif. The mineralogy and paragenesis of the veins allow two separate discrete mineralization episodes(stage I=quartz and calcite stage, stage II-calcite stage) to be recognized, temporally separated by a major faulting event. The ore minerals are contained within quartz and calcite associated with fracturing and healing of veins that occurred during both mineralization episodes. The hydrothermal alteration of stage I is sericitization, chloritization, carbonitization, pyritization, silicification and argillization. Sericitic zone occurs near and at quartz vein and include mainly sericite, quartz, and minor illite, carbonates and chlorite. Chloritic zone occurs far from quartz vein and is composed of mainly chlorite, quartz and minor sericite, carbonates and epidote. Fe/(Fe+Mg) ratios of sericite and chlorite range 0.45 to 0.50(0.48$\pm$0.02) and 0.74 to 0.81(0.77$\pm$0.03), and belong to muscovite-petzite series and brunsvigite, respectiveIy. Calculated $Al_{IV}$-FE/(FE+Mg) diagrams of sericite and chlorite suggest that this can be a reliable indicator of alteration temperature in Au-Ag deposits. Calculated activities of chlorite end member are $a3(Fe_5Al_2Si_3O_{10}(OH)_6$=0.0275${\sim}$0.0413, $a2(Mg_5Al_2Si_3O_{10}(OH)_6$=1.18E-10${\sim}$7.79E-7, $a1(Mg_6Si_4O_{10}(OH)_6$=4.92E-10${\sim}$9.29E-7. It suggest that chlorite from the Samgwang deposit is iron-rich chlorite formed due to decreasing temperature from high temperature(T>450$^{\circ}C$). Calculated ${\alpha}Na^+$, ${\alpha}K^+$, ${\alpha}Ca^{2+}$, ${\alpha}Mg^{2+}$ and pH values during wallrock alteration are 0.0476($400^{\circ}C$), 0.0863($350^{\circ}C$), 0.0154($400^{\circ}C$), 0.0231($350^{\circ}C$), 2.42E-11($400^{\circ}C$), 7.07E-10($350^{\circ}C$), 1.59E-12($400^{\circ}C$), 1.77E-11($350^{\circ}C$), 5.4${\sim}$6.4($400^{\circ}C$), 5.3${\sim}$5.7($350^{\circ}C$)respectively. Gain elements(enrichment elements) during wallrock alteration are $TiO_2$, $Fe_2O_3(T)$,CaO, MnO, MgO, As, Ag, Cu, Zn, Ni, Co, W, V, Br, Cs, Rb, Sc, Bi, Nb, Sb, Se, Sn and Lu. Elements(Ag, As, Zn, Sc, Sb, Rb, S, $CO_2$) represents a potential tools for exploration in mesothermal and epithermal gold-silver deposits.

• Journal of Environmental Science International
• /
• v.16 no.9
• /
• pp.1019-1026
• /
• 2007

This study was performed in 30 selected apartments in Seoul, Asan and Daegu area which were constructed within 4 years and over 4 years, to measure the concentration of VOCs(benzene, toluene, xylene) from July, 2004 to September. Mean ratios of indoor to outdoor VOCs concentrations in the construction under 4 years were higher in 1 than average, I/O ratio of over 4 years were lower in 1. This was considered that the VOCs density influences indoor pollutant. For the indoor air quality estimation, the deposition constant and the source strength factor of toluene were $1.49{\pm}2.05\;hr^{-1}\;and\;36.95{\pm}52.26\;ppb/h$, respectively.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1584-1586
• /
• 2002

CuIn$Se_2$ (CIS) and related compounds such as Cu($In_xGa_{1-x})Se_2$(CIGS) have been studied by their potential for use in photovoltaic devices. CIS thin film materials which have high absorption coefficient and wide bandgap, have attracted much attention as an alternative to crystalline and amorphous silicon solar cells currently in use. Cu-rich CIGS film have very low resistivity, due to coexistence of the semimetallic $Cu_{2-x}Se$. In-rich CIGS films show high resistivity, since these films are compensated films without the $Cu_{2-x}Se$ phase. Optical properties of the CIGS films also change in accordance with the resistivity for the Cu/(In+Ga) ratio. The Cu-rich films have different spectra from In-rich films in near infrared wavelengths.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.7-8
• /
• 2012

The effects of interaction between partially premixed and premixed swirl flames on CO and NOx emissions were experimentally investigated using a hybrid/dual swirl jet combustor for a micro-gas turbine. Under the condition of constant angle ($45^{\circ}$) for outer swirl vane, the angle and direction of inner swirl vane installed for a partially premixed flame were varied as main parameters with a constant fuel flow rate for each nozzle. It was found that for all conditions, CO and NOx emissions were measured below 4 ppm and 15 ppm at 15% $O_2$, respectively, in a wide range of equivalence ratio (0.6~0.9). For co-swirl flows, CO emission increased dramatically as the angle of inner swirl vane increased from $15^{\circ}$ to $45^{\circ}$ near lean-flammability limit (i.e. equivalence ratio of 0.5). On the other hand, the case of swirl $angle=45^{\circ}$ provided the lowest NOx emission at higher equivalence ratios than 0.6. For counter-swirl flows, the case of swirl $angle=45^{\circ}$ extended the lean-flammability limit but higher NOx emissions were found compared to those of co-swirl flows. These results could be inferred by interaction between (inner) partially premixed and (outer) premixed swirl flames. However, these estimations were not clear yet because there was insufficient data on turbulent flow structure and fuel-air mixing in the present experimental approach.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.2
• /
• pp.91-96
• /
• 2007

The measurement of pathologically low levels of tissue $pO_2$ is an important diagnostic goal for determining the prognosis of many clinically important diseases including cardiovascular insufficiency, stroke and cancer. The target tissues nowaday have mostly been tumors or the myocardium, with less attention centered on the brain. Radiolabelled nitroimidazole or derivatives may be useful in identifying the hypoxic cells in cerebrovascular disease or traumatic brain injury, and hypoxic-ischemic encephalopathy. In acute stroke, the target of therapy is the severely hypoxic but salvageable tissue. $^{18}F-MISO$ PET and $^{99}mTc-EC-metronidazole$ SPECT in patients with acute ischemic stroke identified hypoxic tissues and ischemic penumbra, and predicted its outcome. A study using $^{123}I-IAZA$ in patient with closed head injury detected the hypoxic tissues after head injury. Up till now these radiopharmaceuticals have drawbacks due to its relatively low concentration with hypoxic tissues associated with/without low blood-brain barrier permeability and the necessity to wait a long time to achieve acceptable target to background ratios for imaging in acute ischemic stroke. It is needed to develop new hypoxic marker exhibiting more rapid localization in the hypoxic region in the brain. And then, the hypoxic brain imaging with imidazoles or non-imidazoles may be very useful in detecting the hypoxic tissues, determining therapeutic strategies and developing therapeutic drugs in several neurological disease, especially, in acute ischemic stroke.

• Computers and Concrete
• /
• v.13 no.2
• /
• pp.291-308
• /
• 2014

A nonlinear, three-dimensional finite element analysis was conducted on six intermediate L-shaped spandrel beams using the "ANSYS Civil FEM" program. The beams were constructed and tested in the laboratory under eccentric concentrated load at mid-span to obtain a combined loading case: torsion, bending, and shear. The reinforcement case parameters were as follows: without reinforcement, with longitudinal reinforcement only, and reinforced with steel bars and stirrups. All beams were tested under two different combined loading conditions: T/V = 545 mm (high eccentricity) and T/V = 145 mm (low eccentricity). The failure of the plain beams was brittle, and the addition of longitudinal steel bars increased beam strength, particularly under low eccentricity. Transverse reinforcement significantly affected the strength at high eccentricities, that is, at high torque. A program can predict accurately the behavior of these beams under different reinforcement cases, as well as under different ratios of combined loadings. The ANSYS model accurately predicted the loads and deflections for various types of reinforcements in spandrel beams, and captured the critical crack regions of these beams.