• Journal of applied mathematics & informatics
• /
• 제6권2호
• /
• pp.407-416
• /
• 1999

In this paper we give some sufficient conditions for the existence and uniqueness of a continuous for the existence and uniqueness of a continuous slution of the system of Urysohn-Volterra equation with hysteresis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.660-663
• /
• 2003

This paper proposes a systematic approach for an accurate control of the Terfenol-D actuator taking into account hysteresis, modeled by applying the classical Preisach operator with memory curve. A desired input displacement is calculated by using the hysteresis inverter, which is fed into the actuator. Then the PI compensator corrects the error between the commanded and actual displacements. Experiments with the step responses show that the PI controller settles in 70 ms and the hybrid controller in 20 ms. It means that the concurrent application of two control schemes is effective to control the actuator.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1529-1535
• /
• 2012

This paper presents the application algorithm for speed control of Switched Reluctance Motor. The conventional PI controller has been widely used in industrial applications. But it is very difficult to find the optimal PI control gain. Fuzzy control does not need any model of plant. It is based on plant operator experience and heuristics. The proposed fuzzy logic modifier increases the control performance of conventional PI controller. Simulation and experimental results show that the proposed fuzzy control method was superior to the conventional PI controller in the respect of system performance. The experiments are performed to verify the capability of proposed control method on 6/4 salient type SRM.

• Journal of Magnetics
• /
• 제2권3호
• /
• pp.105-109
• /
• 1997

The Preisach model neds a density function or Everett function for the hysterisis operator to simulate the hysteresis phenomena. To obtain the function, many experimental data for the first order transition curves are required. However, it needs so much efforts to measure the curves, especially for the hard magnetic materials. By the way, it is well known that the density function has the Gaussian distribution for the interaction axis on the Preisach plane. In this paper, we propose a simple technique to determine the distribution function or Everett function analytically. The initial magnetization curve is used for the distribution of the Everett function for the coercivity axis. A major, minor loop and the initial curve are used to get the Everett function for the interaction axis using the Gaussian distribution function and acceptable results were obtained.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5587-5594
• /
• 2012

불포화토 역학에 있어 흐름특성에 대한 규명은 지반공학적 문제들을 해결하는데 있어 매우 중요하다. 특히, 불포화토의 흐름특성을 모사하기 위한 첫 걸음이 되는 함수특성곡선의 측정을 위해서는 측정자의 오류를 최소화할 수 있는 신뢰성있고 편리한 기법이 필수적으로 요구되어진다. 플로우 펌프 시스템을 포함하여 현재까지 많은 연구자들은 함수특성곡선을 측정할 수 있는 다양한 기법들을 개발하였다. 본 연구에서는 기존에 제안되어진 플로우 펌프시스템을 활용한 흡입력 조절 기법을 이용하여 건조과정과 습윤과정에서 정확하게 실험 공시체의 함수특성곡선을 측정하였다. 플로우 펌프 시스템을 활용한 흡입력 조절 기법을 통하여 두 가지 시료의 함수특성곡선을 산정하였으며, 실험 결과를 바탕으로 흡입력 조절 기법은 현장 조건에 맞는 조건들을 실내에서 구현할 수 있으며 또한 건조과정과 습윤과정에서 발생하는 함수특성곡선의 이력현상을 규명하는데 적절한 장비인 것을 확인하였다. 특히, 플로우 펌프시스템을 활용한 흡입력 조절 기법은 자동화된 장비와 정밀도로 인하여 높은 정확도를 이끌어낼 수 있어 측정오차를 줄임과 동시에 측정시간을 절약하여 함수특성곡선을 측정할 수 있다.

• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.45-56
• /
• 2019

A modified mechanical model of pre-pressed spring self-centering energy dissipation (PS-SCED) brace is proposed, and the hysteresis band is distinguished by the indication of relevant state variables. The MDOF frame system equipped with the braces is formulated in an incremental form of linear acceleration method. A multi-objective genetic algorithm (GA) based brace parameter optimization method is developed to obtain an optimal solution from the primary design scheme. Parameter sensitivities derived by the direct differentiation method are used to modify the change rate of parameters in the GA operator. A case study is conducted on a steel braced frame to illustrate the effect of brace parameters on node displacements, and validate the feasibility of the modified mechanical model. The optimization results and computational process information are compared among three cases of different strategies of parameter change as well. The accuracy is also verified by the calculation results of finite element model. This work can help the applications of PS-SCED brace optimization related to parameter sensitivity, and fulfill the systematic design procedure of PS-SCED brace-structure system with completed and prospective consequences.