• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.97-107
• /
• 2014

Settlement prediction has been conducted using Hyperbolic, Hoshino, and Monden methods, etc in the fields. These methods are only able to predict settlement after finishing the final filling stage. A new method is proposed to make up for such a weak point. This method was named as SPSFC (Settlement Prediction for Staged Filling Construction) method, which can be able to predict the settlement both the final filling stage and the staged filling from the initial filling stage in soft ground. To verify the applicability of the SPSFC method, firstly. The settlement predicted by the existed methods are compared with that obtained by the SPSFC method. The comparison results indicate the SPSFC has enough reliability to use for prediction of settlement. Secondly. by analyzing the settlement data measured during the initial filling stage, the soil parameters which need to predict the settlement are obtained by the SPSFC method. Then using the obtained soil parameters the time-settlement curve is predicted and compared. The predicted settlement is well matched with the measured one. From the study, the SPSFC method can be possible to predict settlement during the staged filling with only the initial settlement data.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.1
• /
• pp.151-160
• /
• 1999

A series of laboratory tests for the marine clay sampled under the sea of Kwangyang bay have been conducted. The main types of tests are the general index property tests, the oedometer tests and the triaxial compression tests in both undrained(CIU) and drained(CID) conditions. The clayey samples, classified as CL, CH with natural water content of 38.3~84.6% and liquidity index of 0.71~0.98, are in the normally consolidated state with O.C.R. of 1.0l~l.60. The undrained stress path from CIU tests can be normalized with isotropic consolidation pressure$(p_0)$ and equal shear strain contour is linear passing through the origin in the (q, p) plot. The undrained shear strain is found to be the only function of the stress ratio($\eta$) and linear with intercept in the ($\varepsilon/\eta,\eta$) plot. The built-up pore pressure normalized with pc is also linear with respect to $\eta$. and its slope is defined by ´C´ as a pore pressure parameter. Equations to predict the undrained stress path and the shear strain are proposed. It is proved that the proposed equations give better agreements to the measured values than the Cam-clay theories. The failure points of the stress path are located on the same C.S.L. in (q, p) plot during both CIU and CID tests, which justifies the concept of critical state theory.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.10
• /
• pp.39-48
• /
• 2013

This paper presents an equation to depict the penetration behavior during the standard penetration test (SPT) in sandy deposits. An energy balance approach is considered and the driving mechanism of the SPT sampler is conceptually modeled as that of a miniature open-ended steel pipe pile into sands. The equation consists of three sets of input parameters including hyperbolic parameters (m and ${\lambda}$) which are difficult to determine. An iterative technique is thus applied to determine the optimized values of m and ${\lambda}$ using three measured values from a routine SPT data. It is verified from a well-documented record that the simulated penetration curves are in good agreement with the measured ones. At a given depth, the increase in m results in the decrease in ${\lambda}$ and the increase in the curvature of the penetration curve as well as the simulated N-value. Generally, the predicted penetration curve becomes nearly straight for the portion of exceeding the seating drive zone, which is more pronounced as soil density increases. Thus, the simulation method can be applied to extrapolating a prematurely completed test data, i.e., to determining the N value equivalent to a 30 cm penetration. A simple linear equation is considered for obtaining similar results.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.18-23
• /
• 2001

In this paper, the several indexes represented by swimming characteristics of aquarcultured red seabream, Dchrysophrys majors in a farming water raft(10L×10W×5H) were measured by ultrasonic telemetry. The fishes tagged by pingers were tracked by the LBL method(Shin etc., 1994). The location of fishes were calculated by the hyperbolic method and the indexes were estimated by the least square method. The similarity was confirmed by the comparision between experiment and simulation on the swimming trajectory of fishes, the mean distance of individual from wall, the mean swimming speed and the mean distance between the nearest individuals. The obtained results are summerized as follows ; 1. The swimming trajectory of fishes tagged by the pingers and the swimming trajectory by the simulation for 120 minutes showed a simularity. 2. The mean swimming speed by the experiment and the simulation showed 39.2 ㎝/sec (1.4BL ㎝/sec) and 44.4 ㎝/sec (1.6BL ㎝/sec), respectively. 3. The mean swimming depth by the experiment and the simulation showed 238㎝ and 248 ㎝, respectively. 4. The mean distance of individuals from wall of the farming water raft by the experiment and the simulation showed 132 cm and 129 cm, respectively. 5. The mean distance between the nearest individuals by the experiment and the simulation showed 83 ㎝ and 61 ㎝, respectively.

• Applied Biological Chemistry
• /
• v.38 no.1
• /
• pp.1-6
• /
• 1995

An optimal condition for the continuous production of ${\delta}-aminolevulinate$(ALA) was investigated using high concentrated resting cells of Rhodocyclus gelatinosus KUP-74. The increase of the amount of extracellular ALA versus the concentration of resting cells showed rectangular hyperbolic pattern until 20 mg cells/ml, but no further increase in the ALA amount by increasing its concentration was occurred. The highest yield of the extracellular ALA was observed after 3 hr of incubation of 1 ml reaction system containing 20 mg cells, 4 mM levulinate and 5 mM L-glutamate. On the other hand, the immobilized cells prepared by Ca-alginate inclusive method needed to incubate for 6 hr with 6 mM levulinate and 10 mM L-glutamate to give maximal yield of the extracellular ALA. In addition, under these conditions the resulted continuous productivities of the ALA by immobilized cells and highly concentrated resting cells were appeared 50 percent decreases after incubations for 185 hr and 100 hr, respectively, and the method of the cells to be immobilized was more efficient to recover the extracellular ALA produced.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.102-107
• /
• 2006

Recently, rapid developments in computer hardware have enabled reverse-time migration to be applied to various production imaging problems. As a wave-equation technique using the two-way wave equation, reverse-time migration can handle not only multi-path arrivals but also steep dips and overturned reflections. However, reverse-time migration causes unwanted artefacts, which arise from the two-way characteristics of the hyperbolic wave equation. Zero-lag cross correlation with diving waves, head waves and back-scattered waves result in spurious artefacts. These strong artefacts have the common feature that the correlating forward and backward wavefields propagate in almost the opposite direction to each other at each correlation point. This is because the ray paths of the forward and backward wavefields are almost identical. In this paper, we present several tactics to avoid artefacts in shot-domain reverse-time migration. Simple muting of a shot gather before migration, or wavefront migration which performs correlation only within a time window following first arriving travel times, are useful in suppressing artefacts. Calculating the wave propagation direction from the Poynting vector gives rise to a new imaging condition, which can eliminate strong artefacts and can produce common image gathers in the reflection angle domain.

• Geotechnical Engineering
• /
• v.14 no.2
• /
• pp.41-54
• /
• 1998

Predictions of consolidation settlement and time must be always erroneous because of heterogeneity of soil media. errors associated with the measurement of soil parameters, drawback of consolidation theories and so on. When filling is done on compressible soils, the observational procedure is a useful means in practice of evaluating the final consolidation settlement and time. However, the existing observational procedures including some disadvantages such as the difficulty of ending the linearity in the settlement curves, the unavoidable personal error, and so on. A new observational procedure($\sqrt{s}$ method) is suggested here for the consolidation analysis in field. As the results of applying the $\sqrt{s}$ method with other methods to two field data. the fecal settlements predicted by the s method as well as by the Asaoka'$\sqrt{s}$ method agreed well with the measured values. However, results obtained from the hyperbolic method(Tan, 1991) were always overestimated. and there happened many cases not to be predicted by the Hoshino's method. In the settlement curve from the $\sqrt{s}$method, the linearity between 60 and 90 eye of the average degree of consolidation is shown. and then the possibility of a personal error seems to be unusual. The final consolidation times(at $U_{95}$) predicted by the $\sqrt{s}$ method agreed well with the measured ones. but the ones by Asaoka and Tan(1996) methods were very much underestimated or overestimated. where $U_{95}$, is the average degree of consolidation of 95%. The big errors of these two methods seem to result from unconsidering the effect of stage construction.

• Journal of the Korea Convergence Society
• /
• v.9 no.5
• /
• pp.33-41
• /
• 2018

The purpose of this study is to develop more accurate and robust emotion prediction neural network (EPNN) model by combining heart rate variability (HRV) and neural network. For the sake of improving the prediction performance more reliably, the proposed EPNN model is based on various types of activation functions like hyperbolic tangent, linear, and Gaussian functions, all of which are embedded in hidden nodes to improve its performance. In order to verify the validity of the proposed EPNN model, a number of HRV metrics were calculated from 20 valid and qualified participants whose emotions were induced by using money game. To add more rigor to the experiment, the participants' valence and arousal were checked and used as output node of the EPNN. The experiment results reveal that the F-Measure for Valence and Arousal is 80% and 95%, respectively, proving that the EPNN yields very robust and well-balanced performance. The EPNN performance was compared with competing models like neural network, logistic regression, support vector machine, and random forest. The EPNN was more accurate and reliable than those of the competing models. The results of this study can be effectively applied to many types of wearable computing devices when ubiquitous digital health environment becomes feasible and permeating into our everyday lives.

• Wind and Structures
• /
• v.27 no.1
• /
• pp.11-27
• /
• 2018

The straight-cone steel cooling tower is a novel type of structure, which has a distinct aerodynamic distribution on the internal surface of the tower cylinder compared with conventional hyperbolic concrete cooling towers. Especially in the extreme weather conditions of strong wind and heavy rain, heavy rain also has a direct impact on aerodynamic force on the internal surface and changes the turbulence effect of pulsating wind, but existing studies mainly focus on the impact effect brought by wind-driven rain to structure surface. In addition, for the indirect air cooled cooling tower, different additional ventilation rate of shutters produces a considerable interference to air movement inside the tower and also to the action mechanism of loads. To solve the problem, a straight-cone steel cooling towerstanding 189 m high and currently being constructed is taken as the research object in this study. The algorithm for two-way coupling between wind and rain is adopted. Simulation of wind field and raindrops is performed with continuous phase and discrete phase models, respectively, under the general principles of computational fluid dynamics (CFD). Firstly, the rule of influence of 9 combinations of wind sped and rainfall intensity on flow field mechanism, the volume of wind-driven rain, additional action force of raindrops and equivalent internal pressure coefficient of the tower cylinder is analyzed. On this basis, the internal pressures of the cooling tower under the most unfavorable working condition are compared between four ventilation rates of shutters (0%, 15%, 30% and 100%). The results show that the 3D effect of equivalent internal pressure coefficient is the most significant when considering two-way coupling between wind and rain. Additional load imposed by raindrops on the internal surface of the tower accounts for an extremely small proportion of total wind load, the maximum being only 0.245%. This occurs under the combination of 20 m/s wind velocity and 200 mm/h rainfall intensity. Ventilation rate of shutters not only changes the air movement inside the tower, but also affects the accumulated amount and distribution of raindrops on the internal surface.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.6
• /
• pp.141-152
• /
• 2002

This paper is the result of the experimental and numerical research on the distribution of vertical earth pressure due to surcharge loads acting on cantilever retaining wall close to a rigid slope with a stiff angle. Centrifuge model experiments were performed with changing the roughness of adjacent slope to the wall, distance between the wall and the slope and gravitational levels. Vertical earth pressures were measured by earth cells embedded in the backfill of the wall. Test results of vertical earth pressures due to surcharge loads were compared with theoretical estimations by using two different methods of limit equilibrium and the numerical analysis. For limit equilibrium methods, the modified silo and the wedge theories, proposed by Chung(1993, 1997), were used to analyze test results. Based on those modified theories, the particular solution with the boundary condition of surcharge loads on the surface of backfill was obtained to find the vertical stress distributions acting on the backfill. FLAC with the hyperbolic constitutive model was also used for the numerical estimation. As a result of comparison of test results with theoretical and numerical estimations, distribution of vertical earth pressures obtained from centrifuge model tests is generally in good agreement with numerical estmated values by using FLAC whereas the wedge theory shows values close to test results in case the distance between the wall and the slope is narrow.