• Journal of the Korean Ceramic Society
• /
• v.36 no.12
• /
• pp.1342-1349
• /
• 1999

In order to improve the density and the mechanical strength without change in chemical composition the hardened pastes of hydroxyapatite cement were reinforced with powders and/or whiskers of hydroxyapatite. The powders behaved as a seed of hydroxyapatite formation rather than a filler while the whiskers were mrerly dispersed in matrix and capillary pores of the hardened bodies leading to increase in mechanical strength. But the increase in strength But the increase in strength was nnt enough owing to the lack of homogeneous dispersion of the fibers. The highest diametral tensile strength of 18.5 MPa was measured at the hardened hydroxyapatite body in which well-dispersed whisker phase formed uniformly during hydro-thermal curing of power-added and dry-formed hydroxyapatite cement.

• Journal of the Korean Ceramic Society
• /
• v.33 no.1
• /
• pp.7-16
• /
• 1996

${CO_3}^{2-}$ containing whisker-like hydroxyapatite powders were synthesized byhomogeneous precipitation method using urea, Dicalcium phosphate anhdrate[DCPA; $CaHPO_4$] and octacalcium phosphate [OCP; $Ca_8H_2(PO_4_)6\cdot5H_20$]were obtained as precursors and they transformed to high crystalline hydroxyapatites at pH 5.62, and 6.54 respectively. According to the condition of the final pH in the solutions for the solution products and urea contents OCP was remained. When the solution product of $Ca^{2-}$ and ${PO_4}^{3-}$ was $1.5\times 10^4$[$mM^2$] and the content of urea was 0.25 mol.$dm^{-3}$ well crystallized whisker-like hydroxyapatite tens of micrometer in length was obtained. By heat treatment DCPA and OCP were decomposed into $\beta$-tricalcium phosphate [$\beta$-TCP ; $\beta$-$Ca_3{PO_4}_2$] and $\beta$-dicalcium phosphate [$\beta$-DCP ;$\beta$-$Ca_2P_2O_4}_2$]. And well-crystallized hydroxyapatite was partially decomposed into $\beta$-TCP at $800^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.648-653
• /
• 2001

구연산이 첨가된 0.01 M의 $\beta$-인산칼슘 용액을 수열처리 하여 휘스커 상 수산화아파타이트를 합성할 때 수열처리 온도 및 시간이 휘스커의 생성에 미치는 영향을 관찰하였다. 용액을 30$0^{\circ}C$에서 5시간 수열처리 할 때 c축으로 약 60-80$\mu\textrm{m}$까지 성장하고 비교적 순수한 휘스커를 얻을 수 있었으며 이렇게 합성된 수산화아파타이트 휘스커를 수산화아파타이트 시멘트에 1-2 wt% 첨가하였을 때 그 경화체의 직경인장강도는 약 4-6배까지 증가하였다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.289-296
• /
• 2004

Whisker and short rod shaped hydroxyapatite (Ca$_{10}$(PO$_4$)$_{6}$(OH)$_2$ with stoichiometric composition (Ca/P=1.62 -1.67, molar ratio) has been synthesized by hydrolysis and hydrothermal reaction of aqueous $\alpha$-Ca$_3$(PO$_4$)$_2$($\alpha$-TCP) solution (pH 11), respectively. The shape of resultant HAp was mainly dependent on synthetic route and the microstructural development was on processing condition. In hydrolysis processing, the degree of intersection of whiskerlike particles and agglomeration in the apsis line increased with increasing reaction time. In hydrothermal synthesis, the reaction product obtained under excessive reaction time ($\geq$3 h at 20$0^{\circ}C$) was severely agglomerated without further grain growth above certain critical size (0.75 ${\mu}{\textrm}{m}$ in length, 0.3${\mu}{\textrm}{m}$ 11m in diameter).

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.608-614
• /
• 2003

Well developed hydroxyapatite whiskers (length 5 ${\mu}{\textrm}{m}$, diameter 0.5 ${\mu}{\textrm}{m}$) have been synthesized by the hydrolysis reaction of $\alpha$-tricalcium phosphate ($\alpha$-Ca$_3$(PO$_4$)$_2$) under pH 9.1 at 9$0^{\circ}C$ for 6 h. The effect of reaction conditions (temperature, time, pH) on the conversion of $\alpha$-tricalcium phosphate to hydroxyapatite was examined. In addition, the hydroryapatite was characterized in terms of microstructure, composition and thermal stability using XRD, SEM, ICP, and TGA instruments.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.127-131
• /
• 2010

Biomimetic whisker-like apatite was formed on thermally and NaOH-treated titanium powder in a simulated body fluid (SBF). In the early process of the SBF immersion, the surface structure of the titanium powder was loosened, possibly due to the dissolution of $Na^+$ ions on the surface of the titanium powder into SBF. When immersed for 7 days in SBF, fine precipitates appeared on the titanium surfaces; the coating layer (<200 nm in thickness) consisted of nanostructured, amorphous whisker-like and particulate phase, observed by TEM. With the extension of the immersion time to 16 days, the chrysanthemum flower type morphology of carbonated hydroxyapatite with a nanocrystallinity was developed on the surface of the titanium powder.