• 한국응용과학기술학회지
• /
• 제29권1호
• /
• pp.149-158
• /
• 2012

본 연구에서는 올레산을 표면개질제로 사용하여 수열법을 통해 수산화 마그네슘을 합성하였다. 수산화 마그네슘은 알카리 조건에서 올레인산과의 반응을 통해 표면 개질된 마이크로 크기의 플레이크 형상을 갖는다. 수열합성에서 수산화 마그네슘 입자 생성의 조건은 pH, 온도 그리고 반응시간이 표면개질과 입자 형상의 주요 변수임을 확인하였다. 생성된 수산화 마그네슘 입자는 FE-SEM, XRD, FT-IR 그리고 TGA를 통해 확인하였다. 유기 용매 내에서의 분산성의 확인은 개질되지 않은 수산화 마그네슘과의 침전 테스트 비교를 통해 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.656-659
• /
• 2005

Nanocrystalline ceria powders were prepared by hydrothermal treatment of cerium(IV) ammonium nitrate solution without a precipitating agent. A systematic investigation of the effect of hydrothermal temperature and react ion time on the physical properties of the product powders was carried out. When the hydrothermal temperature was increased, the product ceria powders exhibited larger crystallite size with higher yield. Increasing reaction time produced more crystalline ceria powders attributed to further hydrothermal reactions and structural rearrangement. The physical properties of ceria powders can be control led by adjusting the hydrothermal conditions.

• 한국결정성장학회지
• /
• 제16권6호
• /
• pp.240-243
• /
• 2006

본 연구에서는 수열법을 이용하여 저품질의 호주산 천연 사파이어에 대한 색상개선을 행하였다. 호주산 천연 사파이어의 색상 개선에 대한 최적의 수열처리 조건은 다음과 같다. 즉, 수열반응온도 $320{\sim}350^{\circ}C$, 반응시간: 3일, 수열용매: 2 M NaOH 수용액이다. 이와 같은 조건하에서 수열 처리한 후에 투명한 색상의 호주산 천연 사파이어가 얻어졌으며 천연 사파이어 가치 차트로 비교한 결과, commercial 등급이 $middle{\sim}top$ 등급으로 색상이 개선되었음을 확인하였다.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.563-566
• /
• 1998

BaTiO3 분말은 티타늄 수산화물 용액과 비륨수산화물 용액을 혼합하여 적당한 온도와 압력하에서 합성되었다. 미분말이 얻어진 온도는 160~$185^{\circ}C$, 압력은 5~10kg/$\textrm{cm}^2$이였다. 분말의 모양과 크기는 주사전자현미경, 결정 상은 X-선 회절로 분석하였다. 분말합성온도, 반응시간 및 농도변화에 따르는 분말의 물성을 조사하였다. $BaTiO_3$ 분말의 평균입자크기는 반응온도 및 시간이 증가함에 따라 증가하였다. $170^{\circ}C$에서 8시간 반응시킨 경우의 평균입자크기는 약 30nm이고, 입도 분포는 균일하였다.

• 센서학회지
• /
• 제20권6호
• /
• pp.406-411
• /
• 2011

$Co_3O_4$ thick film gas sensor using the powder prepared by hydrothermal reaction method(HRM) was fabricated. For comparison study, we also prepared the sensor using commercial $Co_3O_4$ powder under the same fabrication conditions. Sensitivity, time response, and selectivity of them to variable gases such as iso-$C_4H_{10}$, CO, $NH_3$, and $CH_4$ were investigated. The sensor from the powder prepared by HRM showed higher sensitivity to every gas than those from commercial powder. For iso-$C_4H_{10}$ gas, the sensitivities of both sensor to 100 ppm are 160 % and 40 %, respectively. Time response and selectivity of the sensor using the powder prepared by HRM were better than those of the sensor using commercial powder.

• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1341-1345
• /
• 2004

We developed a novel synthesis strategy of titania nanowire arrays by employing simple hydrothermal reaction and ion-exchange reaction techniques. Hydrothermal reactions of metallic titanium powder with $H_2O_2$ in a 10 M NaOH solution produced a new sodium titanate compound, $Na_2Ti_6O_{13}{\cdot}xH_2O$ (x~4.2), as arrays of nanowires of lengths up to 1 mm. Acid-treatment followed by calcination of this material produced arrays of highly crystalline anatase nanowires as evidenced by x-ray diffraction, Raman spectroscopy, and transmission electron microscopy studies. In both cases of sodium titanate and anatase, the nanowires have exceptionally large aspect ratios of 10,000 or higher, and they form arrays over a large area of $1.5 {\times} 3 cm^2$. Observations on the reaction products with varied conditions indicate that the array formation requires simultaneously controlled formation and crystal growth rates of the $Na_2Ti_6O_{13}{\cdot}xH_2O$ phase.

• 센서학회지
• /
• 제19권5호
• /
• pp.385-390
• /
• 2010

CO sensing thick film gas sensors using $Co_3O_4$ powders prepared by hydrothermal reaction method, were fabricated, and their structural, electrical and CO gas sensing properties were investigated. The specific surface area of the $Co_3O_4$ powders obtained from BET analysis was about 79.0 $m^2/g$. XRD and SEM results show that the thick films heat-treated at $500^{\circ}C$ for 30 min after screen printing had the preferred orientation of (311) direction and the crystalline size was calculated to 221 $\AA$. The maximum activation energy obtained from the temperature-resistance characteristics was 3.11 eV in the temperature range of $290^{\circ}C$ to $310^{\circ}C$. The sensitivity to 1,000 ppm CO was about 150 %. The specific surface area, crystalline size, and maximum activation energy were increased significantly and the sensitivity for CO gas was improved largely.

• 한국세라믹학회지
• /
• 제48권1호
• /
• pp.99-105
• /
• 2011

Lead titanate ($PbTiO_3$) powder was prepared from lead nitrate ($Pb(NO_3)_2$) and titania ($TiO_2$) by hydrothermal route. Phase formation process was investigated by observing the phases formed in various experimental conditions like different KOH concentration, reaction temperature and time. $PbTiO_3$ powder was fabricated when the KOH concentration was 0.8M or higher. An intermediate compound, $PbTi_{0.8}O_{2.6}$, was formed at first by a reaction between PbO and $TiO_2$ and changed into $PbTiO_3$ powder with a perovskite crystal structure. A $PbTiO_3$ phase was formed in a shorter time when a KOH concentration was increased from 0.8M to 8M because a driving force for a $PbTiO_3$ formation was increased due to an increase in a degree of supersaturation. And $TiO_2$ (rutile) and $3PbO{\cdot}H_2O$ were observed at room temperature in a 0.8M KOH solution and $TiO_2$(rutile) and PbO (litharge) in a 8M KOH. A $PbTiO_3$phase was also formed in a shorter time at a higher reaction temperature as a reaction temperature influenced the rates for a dissolution and a precipitation.

• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.293-300
• /
• 2020

홍조류인 Eucheuma spinosum은 카라기난을 주된 다당으로 함유하고 있으며 Indonesia, Malaysia, Philippines, China, Tanzania 등지에서 상업적으로 생산되고 있다. 본 연구에서는 E. spinosum을 대상으로 FeCl₃-촉매 수열반응을 통하여 당과화학중간체(5-HMF, levulinic acid, formic acid)로전환하고자하였다. 통계적실험법(3-수준-3-인자의 Box-Behnken design)을 적용하여 반응인자(반응온도, 촉매농도, 반응시간)의 최적화와 영향을 평가하였다. 최적화 결과, 5-HMF의 농도는 160 ℃, 0.4 M FeCl₃, 10 min에서 2.96 g/L가 생성되었다. Levulinic acid와 formic acid의 최적 조건은 200 ℃, 0.6 M FeCl₃, 30 min으로 결정되었고, 농도는 각각 4.26 g/L와 3.77 g/L이었다.

• Environmental Engineering Research
• /
• 제23권4호
• /
• pp.456-461
• /
• 2018

The solid-state anaerobic digestion (SS-AD) has promoted the development and application for biogas production from biomass which operate a high solid content feedstock, as higher than 15% of total solids. However, the digested byproduct of SS-AD can be used as a fertilizer or as solid fuel, but it has serious problems: high moisture content and poor dewaterability. The organic residue from SS-AD has to be improved to address these problems and to make it a useful alternative energy source. Hydrothermal carbonization was investigated for conversion of the organic residue from the SS-AD of livestock waste to solid fuels. The effects of hydrothermal carbonization were evaluated by varying the reaction temperatures within the range of $180-240^{\circ}C$. Hydrothermal carbonization increased the calorific value through the reduction of the hydrogen and oxygen contents of the solid fuel, in addition to its drying performance. Therefore, after the hydrothermal carbonization, the H/C and O/C atomic ratios decreased through the chemical conversion. Thermogravimatric analysis provided the changed combustion characteristics due to the improvement of the fuel properties. As a result, the hydrothermal carbonization process can be said to be an advantageous technology in terms of improving the properties of organic waste as a solid-recovered fuel product.