• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.511-512
• /
• 1996

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.117-128
• /
• 1994

Hematite particles were obtained by hydrothermal reaction of ferric hydroxide in the presence of small amount of citric acid which is acted as crystal growth controller. The effects of hydrothermal reaction condition son the morphology and crystal structure of powder were investigated using X-ray, TEM and FT-IR. Ellipsoidal or rectangular hematite particles were formed in the range of pH 10.75~11.75 as initial basicity of reactants and 3$\times$10-5 ~9$\times$10-5 mol as citric acid content. Crystallization of hematite was inhibited in the range of pH9. 0~10.5 and above citric acid content of $1.5\times$10-4 mol. Hematite particle length and aspect ratio were decreased gradually with increasing of citric acid content. Hematite particles formed at 14$0^{\circ}C$ exhibited particle properties with the length of 0.7 ${\mu}{\textrm}{m}$ and aspect ratio of 8. Hematite particles having a good acicular-type were not obtained above 22$0^{\circ}C$.

• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.845-850
• /
• 2008

Hydrated sodium silicate was synthesized by hydrothermal reaction using anhydrous sodium silicate. The optimum additions of water was 25wt% to make hydrated sodium silicate with homogeneous and purposed water contents. Porous ceramics with homogeneous microstructure and spherical closed pore can be fabricated by elimination of the large pores(a few mm in size) which was formed during first heat treatment through the decomposition of water. Spherical closed pore was formed above $600^{\circ}C$ and the pore size was increased with increasing second heat treatment temperature due to growth of pores. The size of spherical closed pore was varied from 35 to $233\;{\mu}m$ and specific gravity was varied from 0.2 to 1.02 depending on the combinations of the first and second heat treatment temperature.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1390-1395
• /
• 1999

Zr(Y,Ce)O2 TZP ceramics were prepared by sintering compacts of 3 mol% Y2O3-TZP(3Y-TZP) powders with different amount of 12 mol% CeO2-TZP(12Ce-TZP) in air at 140$0^{\circ}C$ for 2 h. The phase changes microstructure and mechanical properties of Zr(Y. Ce)O2 TZP after hydrothermal aging(20$0^{\circ}C$ 5h) were investigated. Although an addition of 12Ce-TZP accelerated the grain growth of Zr(Y, Ce)O2 TZP it restrained the transformation of tetragonal to the monoclinic phase during aging. The degradation in mechanical properties of sintered bodies was governed by the formed monoclinic phase and chemical composition. Induced Vickers indentation crack was propagated intergranually. From SEM observation of the fracture surfaces the pull-out of individual grain was confirmed.

• Carbon letters
• /
• 제16권3호
• /
• pp.211-214
• /
• 2015

Bio-imaging and drug carriers for delivery have created a huge demand for crystals. Crystals are fascinating materials that have been grown for a long time but obtaining biocompatible fluorescent crystals is a challenging task. We report on the growth of fluorescent crystals using a carbon dot (C-dot) solution by a hydrothermal process. The crystallization pattern of these C-dots exhibited a unique dendritic structure having a feather-like morphology. The growth temperature and pressure were maintained at 60℃ and 200 mmHg, respectively, for crystal growth. A green fluorescence (under UV light) that was observed in the C-dot solution was retained in the crystals formed from the solution. Cytotoxicity studies on Vero cells revealed the crystals to be extremely biocompatible. These fluorescent crystals are extremely well suited for biomedical and optoelectronic applications.

• 한국결정성장학회지
• /
• 제7권1호
• /
• pp.47-58
• /
• 1997

본 연구에서는 수열성장법을 이용해서 알루미늄 수화물인 깁사이트로부터 코런덤($\alpha$-$Al_2O_3$) 단결정 분말을 제조하였으며, 주요 반응인자로서 광화제와 성장기질의 특성이 생성물의 입도분포와 결정성에 미치는 영향을 조사했다. 실험결과 성장용액의 용해도를 증가시키기 위해 광화제로 사용된 KOH의 첨가량이 증가할수록 코런덤 입자의 크기가 커졌고, 수열반응 온도는 낮아졌으나, 영양제인 깁사이트의 농도가 증가할수록 합성된 코런덤 입자는 작아졌다. 성장기질의 물성특성 차이에 따라 수열합성 조건이 달라졌다. 수열합성을 통해 400~$470^{\circ}C$인 반응온도 범위에서 1~10 $\mu \t extrm{m}$ 정도의 중량평균 입경을 갖는 육방정의 코런덤 결정을 합성하였다.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.129-140
• /
• 1996

본 연구에서는 수열성장법을 이용해서 알루미늄 수화물로부터 코런덤($\alpha$-Al_{2}O_{3}$) 단결정을 지조하였고, 합성 조건에 관해 조사하였다. 수열 조건에 영향을 미치는 주요인자는 반응온도, 종자결정 및 반응시간이었으며, 특히 종자결정은 코런덤의 입도와 결정형태에 큰 영향을 미쳤다. 영양제로 사용한 일본산 깁사이트에 종자결정을 첨가해서 2시간 동안 수열반응 시킨 결과 $460^{\circ}C$에서 중량평균입경이 $11\;\mu\textrm{m}$인 육방정의 코런덤 결정이 합성되었으며, 또다른 유형의 러시아산 깁사이트로부터는 $420^{\circ}C$에서 중량평균입경이 $6\;\mu\textrm{m}$인 육방정의 코런덤 결정이 합성되었다.

• 한국결정성장학회지
• /
• 제26권3호
• /
• pp.95-100
• /
• 2016

본 연구에서는 염화주석, 하이드라진 그리고 수산화나트륨을 원료로 하여 용액환원침전법과 수열반응법을 이용하여 주석산화물 결정을 제조하여, 주요 실험 변수에 의한 결정상 및 형상을 XRD와 SEM을 이용하여 분석하였다. 원료의 몰 비에 따라 구형 및 판상의 주석산화물 결정을 얻을 수 있었으며, 그 결정상은 SnO, $Sn_6O_4(OH)_4$이었다. 그리고 수열반응법에 의하여 얻어진 결정 모양은 온도 조건에 따라 판상 및 꽃 모양의 SnO 결정이 얻어졌다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.35-58
• /
• 2000

The demand for sub-micrometer or nanometer functional ceramic powders with a better suspension behavior in aqueous media in increasing. Redispersible barium titanate (BT) nanocrystals, green light emitting Mn2+ doped Zn$_2$SiO$_4$ and ZnS nanoparticle phosphors were synthesized by a hydrothermal method or chemical precipitation with surface modification. The nanoparticle redispersibility for BT was achieved by using a polymeric surfactant. X-ray diffraction(XRD) results indicated that the BT particles are of cubic phase with 80 nm in size. XRD results of zinc silicate phosphor indicate that seeds play an important role in enhancing the nucleation and crystallization of Zn$_2$SiO$_4$ crystals in a hydrothermal condition. This paper describes and discuss the methods of surface modification, and the resulting related properties for BT, zinc silicate and zinc sulfide.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.87-89
• /
• 1997

The BaTiO$_3$ fine powder was prepared by hydrthermal method using titanium tetrahydoxide (Ti(OH)$_4$) and barium dihydroxide (Ba(OH)$_2$.8$H_2O$) as raw materials. The fine powder was obtained at temperatures as low as 160 to 185$^{\circ}C$. The properties of the BaTiO$_3$ powder were studied as a function of various parameters (reaction temperature, reaction time, Ba/Ti=ratio, etc). The average particle size of the BaTiO$_3$ increased with increasing reaction temperature. After hydrothermal treatment at 17$0^{\circ}C$ for 8 h, the average particle size of the BaTiO$_3$ powder was about 30 nm and the particle size distribution was narrow.