• 한국의류학회지
• /
• 제22권1호
• /
• pp.72-79
• /
• 1998

Journal of the Korean Society of Clothing and Textiles Vol. 22, No. 1 (1998) p. 72∼79 The purpose of this study was to investigate the effects of geometrical structure and fiber type on the water vapor transport properties of nonwoven batting materials. Two types of fiber were used such as polyester and wool. Correlation between physical properties of nonwovens and water vapor transport rate was analyzed by Pearson Correlation. Steady and dynamic state water vapor transport properties were measured by absorption, evaporation and cobaltots chloride method respectively. The results were as follows: 1) In geometrical structure, thickness of nonwovens was effected on absorption and evaporation rate and air permeability was more influencing factor on water vapor transport rate than porosity. There were no decreasing of water vapor transport rate in hydrophilic fiber at high relative humudity. 2) The hydrophilicity of fiber affected steady and dynamic state water vapor permeabilities and wool nonwoven showed higher water vapor transport rate than polyester at high relative humidity. 3) Thickness showed higher correlation coefficient with water vapor transport rate than other physical properties of nonwovens.

• 멤브레인
• /
• 제28권6호
• /
• pp.379-387
• /
• 2018

본 연구에서는 한외여과 polysulfone (PSf) 중공사막에 첨가제를 섞는 방법을 통해 친수성 증가에 따른 분리막 특성 및 성능을 향상하고자 하였다. 15 nm 크기의 fumed silica (FS)를 0.1, 0.3, 0.5 wt%로 방사 용액에 분산시켜 혼합 매트릭스 분리막을 제조하였다. 단면 및 표면상태를 확인하기 위해 SEM 분석을 진행하였으며, FS가 함유될수록 중공사막의 평균 기공 반경이 4 nm 이상 증가하는 것을 확인하였다. 또한, 분리막의 친수성 분석을 위해 접촉각 측정을 진행하였으며, FS 함유로 분리막의 친수성이 높아진 것을 확인하였다. 수투과도의 경우 FS가 섞인 분리막은 91~96 LMH 수준을 보였으며 PSf 분리막보다 5~11%의 증가율을 보였다. 내오염성 평가에서도 친수도가 상승한 FS 혼합 중공사막 표면에 소수성을 띄는 BSA가 흡착되지 못하여 상대 유량 감소율이 PSf 단일막 보다 낮아졌음을 확인하였다.

• 한국의류학회지
• /
• 제10권2호
• /
• pp.1-9
• /
• 1986

To study the effects of surface structure of fiber on the decrement of fatty soil removal at high temperature, the following variables were selected: controled and alkali-treated P.E.T.(polyester) fabrics and chopped fibers as substrates to estimate the detergencies, different aging methods of soiled substrates, and different washing temperatures and surfactant solutions. Radiotagged tripalmitin was used as soil and the detergency was estimated by means of liquid scintillation counting method. The results were as following: The surface of the fiber became rough with many grooves and the hydrophilicity of the fiber was increased and the structure of the fabric became loose by alkali treatment. While the detergency of alkali-treated P.E.T. fabric was better than that of controled P. E. T. fabric, there was no significant differences between the detergencies of controled and alkali-treated chopped fibers. These results indicate that the increment of detergency of alkali-treated P.E.T. fabric is mainly resulted from the changes of fabric structure and the improved hydrophilicity of fiber by alkai treatment. The detergency of tripalmitin was increased with elevating temp. below the m.p. of tripalmitin, was decreased around the m.p., and again was increased above the m.p ..It is considered that the decrement of detergency around the m.p. is due to the diffusion of molten tripalmitin into the grooves on fiber surface, the inner part of fiber, and between fibers. When controled and alkali-treated soiled fabrics and soiled chopped fibers were washed in the distilled water and in the Na-DBS solution respectively, below $60^{\circ}C$ detergencies of alkali-treated fabrics and chopped fibers were improved. However above $60^{\circ}C$ this result was reversed. Therefore these results are regarded as the effects of grooves on fiber surface at high temp. and improved hydrophilicity at low temp. by alkali treatment. When controled and alkali-treated soiled fabrics and soiled chopped fibers were hot-aged before washing, the detergencies of both species were decreased generally. Because the soil was diffused into the grooves on fiber surface, the inner part of fiber, and between fibers during hot-aging. The detergencies of hot-aged species were also decreased above certain temp.. These results suggest that the decrement of detergency at high temp. be resulted not only from the diffusion of soil into the grooves on fiber surface, the inner part of fiber, and between fibers, but also from the characteristics of surfactant solutions.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.47-50
• /
• 2001

고분자의 생분해는 미생물에 의하여 분비되는 효소를 촉매로 하여 산화, 가수분해 등의 반응이 일어나 진행된다. 고분자의 생분해성에 영향을 미치는 요소는 다양하여 고분자 자체의 분자구조뿐만 아니라 분해되는 환경조건과도 관련되어있다. 특히 고분자를 분해시키는 미생물과 분해에 직접적인 촉매로 작용하는 효소는 대부분 수분이 있는 조건에서 활성이 크기 때문에, 수분의 접근성과 침투정도는 생분해에 중요한 요인으로 작용한다. (중략)

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.401-404
• /
• 2006

Much of requirements to the civil and building structures have been changed in accordance with the social and economic progress. Ductility of high performance fiber reinforced cementitious composites(HPFRCCs), which exhibit strain hardening and multiple crackling characteristics under the uniaxial tensile stress is drastically improved. In HPFRCC application, PVA fiber has been dominantly used as a reinforcement because of its excellent alkali resistant nature as well as high strength. But the inherent strong hydrophilicity of PVA fiber promotes the moisture absorption in cement matrix and thus it may cause the corrosion of steel structure. Therefore, it is necessary to control the interfacial adhesion of cement composites. In present study, to control the interfacial adhesion of the cementitious composites reinforced by PVA fiber, UV irradiation of the PVA fiber were performed and their effects on the adhesion property and general characteristics were investigated extensively.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제8권2호
• /
• pp.195-200
• /
• 2004

Trypsin can be immobilized on silk fibroin fiber (SFF) by introducing several spacer arms, such as ethylene diamine (ED), bovine serum albumin (BSA) and silk sericin (SS). Direct immobilization on silk fiber (SFFGA) has low activity because of the steric hindrance between the trypsin and substrate. The introduction of spacer arms onto SFF-GA can enhance the activity of trypsin by reducing the steric hindrance. When ED is used as a spacer arm, the activity of trypsin has increased but its stability decreased due to the increased hydrophobicity of SFF. BSA and SS, as a spacer arm, have better results in both activity and stability. SFF-BSA shows some decrease in the specific activity due to improper immobilizatin. SFF-SS maintained 90% of its initial activity even after 12 hrs incubation at $50^{\circ}C$. In the case of repeated hydrolysis of silk sericin with immobilized trypsin, SFF-GA and SFF-ED lost 50% of their initial activity right after first run, whereas SFF-BSA and SFF-SS maintained 80% of their initial activities even after 5 runs. Higher operational stability is due to increased hydrophilicity of SFF by introducing hydrophilic spacer arms such as BSA and SS. The high content of serine in SS increases the hydrophilicity of SFF resulting the best results among other spacer arms.

• Fibers and Polymers
• /
• 제5권1호
• /
• pp.52-58
• /
• 2004

Previous investigation results revealed that after the Low Temperature Plasma (LTP) treatment, the hydrophilicity of wool fiber was improved significantly. Such improvement enhances the wool dyeing and finishing processes which might be due to the changes of the wool surface to a more reactive one. In this paper, wool fibers were treated with LTP with different gases, namely, oxygen, nitrogen and gas mixture (25 % hydrogen/75 % nitrogen). Investigations showed that chemical composition of wool fiber surface varied differently with the different plasma gas used. The surface chemical composition of the different LTP-treated wool fibers was evaluated with different characterization methods, namely FTIR-ATR, XPS and saturated adsorption value. The experimental results were thoroughly discussed.

• Composites Research
• /
• 제26권3호
• /
• pp.165-169
• /
• 2013

This work presents the tensile properties and water uptake behavior of plasma treated abaca fibers reinforced epoxy composites. The composites were prepared by vacuum assisted resin transfer molding. The effects of treatment on tensile properties and sorption characteristics of abaca fiber composites in distilled water and salt solution at room temperature were investigated. The tensile strength of the composites increased with plasma treatment. With plasma treatment, an improvement of 92.9% was obtained in 2.5 min exposure time in plasma. This is attributed to high fiber-matrix compatibility. Less improvement on tensile properties of hybrid treatment of sodium hydroxide and plasma was obtained. However, both treatments reduced overall water uptake in distilled water and salt solution. Hydrophilicity of the fibers decreased upon plasma and sodium hydroxide treatment, which decreases water uptake.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.187-188
• /
• 2003

In previous study, we examined poly(butylene succinate) ionomer (PBSi) and confirmed that PBSi showed acceptable mechanical and rheological properties to apply in various field, due to the physical cross-linkage formed by ion aggregation. Besides, the incorporation of ionic groups led to the change of surface properties such as the hydrophilicity and surface morphology, which could affect hydrolytic degradation. (omitted)

• 멤브레인
• /
• 제27권1호
• /
• pp.60-67
• /
• 2017

최근 전 세계적으로 급속한 도시화, 인구증가 및 기후변화에 따른 물의 수요와 공급의 불균형으로 인해 물 산업의 경제, 사회, 환경적 중요성은 더욱 증가하고 있다. 이러한 물 산업은 크게 해당 분야에 따라 사용되는 분리막의 종류가 상이하다. 주로 물리적, 화학적 안정성이 매우 우수한 고분자 소재가 사용되고 있으나, 이들 고분자들의 소수성인 성질 때문에 친수성을 부여하는 다양한 방법들이 소개되고 있다. 본 연구에서는 상용화되어 있는 중공사 지지체에 총 4종류의 친수성 고분자들을 도입하여 친수성을 부여하였고, 주사전자현미경을 통해 코팅된 중공사 지지체의 모폴로지를 확인하였다. 또한, 각 고분자들로 코팅한 중공사 지지체의 친수화 정도를 알아보기 위해 접촉각을 측정하였고, 마지막으로 코팅 시간에 따른 수투과도 변화 그리고 친수성 고분자에 따라 수투과도에 미치는 영향을 확인하였다. 그 결과 Pluronic 1 wt%로 코팅하였을 때 친수화 정도가 우수하며 중공사의 기공을 막지 않고 우수한 수투과도 정도를 나타내 수처리 분리막으로 가장 적절하다는 결론을 얻을 수 있었다.