• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.533-538
• /
• 2003

It has been shown that ion implantation produces remarkable improvements in surface-sensitive physical and chemical properties as well as other mechanical properties, in polymers. In this study, ion implantation was performed onto polymer, PC(polycarbonate), in order to investigate surface hydrophilic property through contact angle measurement using distilled water. PC was irradiated with N, Ar, Xe ions at the irradiation energy of $20\;{\sim}\;50keV$ and the dose range of $5{\times}10^{15},\;1{\times}10^{16},\;7{\times}10^{16}\;ions/cm^2$. The contact angle of water has been reduced with increasing fluence and ion mass but increased with increasing implanted energy. The changes of chemical and structural property are discussed in view of infrared spectroscopy and FT-IR, XPS, which shows increasing C-O bonding and C-C bonding. The root mean square of surface roughness examined by means of AFM changed smoothly from 0.387nm to 0.207nm and the change of wettability was discussed with respect to elastic and inelastic collisions obtained as results of TRIM simulation. It was found that wettability of the modified PC surface was affected on change of functional group and nuclear stopping or linear energy transfer(LET, energy deposited per unit track length per ion) that causes chain scission by displacing atom from polymer chains, but was not greatly dependant on surface morphology.

• Corrosion Science and Technology
• /
• 제8권3호
• /
• pp.103-109
• /
• 2009

An epoxy coating was designed to give a hydrophobic property on its surface by modifying it with three types of Amino Terminated Polydimethylsiloxane (ATP), and then effects of the modification on the structure, surface hydrophobic tendency, water transport behavior and hence corrosion protectiveness of the modified epoxy coating were examined using FT-IR spectroscopy, hydrothermal cyclic test, and impedance test. The surface of epoxy coating was changed from hydrophilic to hydrophobic property due primarily to a phase separation tendency between epoxy and modifier by the modification. The phase separation tendency is more appreciable when modified by ATP with higher molecular weight ATP at higher content. Water transport behavior of the modified epoxy coating decreased more in that with higher hydrophobic surface property. The resistance to localized corrosion of the modified epoxy coated carbon steel was well agreed with its water transport behavior and hydrophobic tendency.

• 멤브레인
• /
• 제27권1호
• /
• pp.92-103
• /
• 2017

본 연구에서는 리튬이온전지용 친수화된 세퍼레이터의 전기화학적 성능에 대한 연구를 진행하였다. 리튬이온전지용 분리막으로 사용되는 폴리올레핀 소재는 소수성이고, 카보네이트 계열의 유기용매를 사용하는 전해액은 친수성을 가진다. 따라서 리튬이온전지는 수계전해액을 사용하기 때문에 폴리올레핀계 분리막에 다양한 친수성 고분자를 도입하여 친수화 처리하였다. 코팅된 세퍼레이터의 변화를 평가하기 위해, 표면 관찰, 코팅시간에 따른 친수화도, 다공성, 젖음성에 대한 특성평가를 수행하였다. 최종적으로 리튬이온이 코팅된 세퍼레이터의 저항과., 이온전도도를 측정하여 리튬이온전지 성능평가를 진행하였다. PMVE로 코팅한 세퍼레이터의 친수화 정도가 우수하며, 세퍼레이터의 기공이 잘 유지되어 우수한 이온전도도를 나타냄으로써 이차전지 배터리에 적용을 위한 잠재성을 가짐을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.257-257
• /
• 2013

In order to selectively remove oil and organic compound from water, silica nanoparticles with hydrophobic coating was used. Since silica nanoparticles are generally hydrophilic, removal efficiency of oil and organic compound, such as toluene, in water can be decreased due to competitive adsorption with water. In order to increase the removal efficiency of oil and toluene, hydrophobic polydimethylsiloxane (PDMS) was coated on silica nanoparticles in the form of thin film. Hydrophobic property of the PDMS-coated silica nanoparticles and hydrophilic silica nanoparticles were easily confirmed by putting it in the water, hydrophilic particle sinks but hydrophobic particle floats. PDMS coated silica nanoparticles were dispersed on a slide glass with epoxy glue on and the water contact angle on the surface was determined to be over $150^{\circ}$, which is called superhydrophobic. FT-IR spectroscopy was used to check the functional group on silica nanoparticle surface before and after PDMS coating. Then, PDMS coated silica nanoparticles were used to selectively remove oil and toluene from water, respectively. It was demonstrated that PDMS coated nanoaprticles selectively aggregates with oil and toluene in the water and floats in the form of gel and this gel remained floating over 7 days. Furthermore, column filled with hydrophobic PDMS coated silica nanoparticles and hydrophilic porous silica was prepared and tested for simultaneous removal of water-soluble and organic pollutant from water. PDMS coated silica nanoparticles have strong resistibility for water and has affinity for oil and organic compound removal. Therefore PDMS-coated silica nanoparticles can be applied in separating oil or organic solvents from water.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.119-127
• /
• 2003

지질이 소수성인 RGP lens의 관리용액인 다목적용액(multipurpose solution, MPS)에서 중요한 요소인 습윤성에 대해 알아보고자 시중에 유통 중인 6개사 제품을 측정 비교해 보았다. 실험에 사용한 MPS는 ALCON의 OPTI-SOAK, CIBA Vision의 SOLO care hard, ALLEKGAN의 Total care, BOSTON의 Simplicity, B&L의 Wetting and Soaking Sol., 그리고 Saehan의 Aquas-multi였으며, 실험방법은 각각에 대해 접촉각과 표면장력, 점도를 측정하였다. 결과는 RGP lens를 8시간 MPS에 담근 후 인공누액을 떨어뜨려 측정한 접촉각은 $25^{\circ}{\sim}36^{\circ}$의 범위로 렌즈와 MPS는 비교적 우수한 습윤성을 보여주었으며, 표면장력은 19.8~31.3 mN/m의 값이 얻어졌다. 각각의 다목적용액에 렌즈를 홀더에 얹은 상태로 계면과 렌즈가 분리될 때의 표면장력을 측정하였을 때는 26.5~33.5mN/m의 값이 측정되었다. 점도는 $4^{\circ}C$와 $28^{\circ}C$에서 측정했으며 측정온도에 따라 온도가 낮을수록 높게 측정되었고, MPS의 온도 $28^{\circ}C$에서 측정했으며 측정온도에 따라 온도가 낮을수록 높게 측정되었고, MPS의 온도 $28^{\circ}C$에서 점도는 9.5~65.5 cps를, $4^{\circ}C$에서는 6.5~137 cps의 값을 보였다. RGP lens MPS는 soft lens MPS에 비해 접촉각과 표면장력은 낮고, 점도는 높아서 습윤성이 더 우수하였는데 제조회사에 따라 습윤성의 차이가 다소 있었다.

• 폴리머
• /
• 제33권3호
• /
• pp.263-267
• /
• 2009

d-PMMA(deuterated poly(methyl methacrylate)) 박막 표면의 친수성을 향상시키기 위해 산소 플라즈마에 노출시켰다. 이 때 모든 조건은 동일하며, 플라즈마에 대한 노출 시간만을 0초에서 180초까지 변화를 주어 노출 시간에 대한 영향을 접촉각과 X-ray 반사율 장치, 중성자 반사율 장치, XPS(X-ray photoelectron spectroscopy)를 이용해 조사하였다. 노출 시간이 증가할수록 물 접촉각은 작아지며, 산소의 조성은 커짐을 확인함으로써 산소의 조성이 친수성 향상에 큰 영향을 미치는 것을 확인할 수 있었다. 또한, X-ray 반사율 장치를 이용해 얻은 에칭률을 통해서 d-PMMA 박막에 대한 산소 플라즈마의 노출 시간에 따른 물리적 특성을 연구하였으며, X-ray 반사율과 중성자 반사율, 그리고 XPS 측정 결과로부터 산소와 탄소의 조성뿐만 아니라 수소의 조성까지도 얻음으로써 플라즈마 처리된 박막의 화학적 성질을 보다 자세히 연구할 수 있었다.

• 청정기술
• /
• 제20권3호
• /
• pp.226-231
• /
• 2014

본 연구는 미세 몰드 기술을 이용하여 산세기 자극에 따라 모양이 변화하는 야누스 입자를 제조하는 방법에 관한 것이다. 야누스 입자는 산세기(pH) 응답형 단량체인 acrylic acid (AA)를 사용하여 친수성 부분을 제조하고, trimethylolpropane triacylate (TMPTA)를 사용하여 소수성 부분을 제조하였다. 제조된 야누스 입자는 산세기 변화에 따라서 친수성 부분의 팽윤이 유도되며 결과적으로 자극 응답성을 가짐을 증명 하였다. 자극 응답성 정도는 산세기의 범위 또는 AA의 조성을 다양화 함으로써 제어가 가능하다. 더 나아가 야누스 입자의 양쪽 부분이 반대 전하를 띄는 특성을 부여하기 위해 AA와 2-(dimethylamino)ethyl methacrylate (DAEMA)를 사용하여 양극성 야누스 입자를 제조하였다. 양극성 야누스 입자는 동일한 산세기 조건에서 서로 다른 팽윤율을 갖게 되며 비대칭적 형상을 띄게 된다. 결론적으로, 본 연구에서는 야누스 입자의 친수성 부분에 산세기 응답형 단량체를 사용함으로써, 산세기 자극에 의해 가역적으로 모양 변형이 가능한 야누스 입자를 제조하였다. 본 연구를 통해 제조된 자극 응답형 야누스 입자는 향후 바이오 센서나 검출 기구 등에 활용 될 것으로 기대한다.

• 한국의류산업학회지
• /
• 제25권1호
• /
• pp.119-126
• /
• 2023

This study aimed to determine the effects of relative humidity and fiber properties on the moisture permeability of multilayer systems by measuring water vapor transmission in the overlapping condition of various fabrics. The results confirmed that the property of the fabric in contact with the humid environment affects the moisture permeability. If the layer facing the humid environment is hydrophobic and the layer facing the dry environment is superhydrophobic, water vapor transmission increases by up to 17.8% compared to the opposite conditions. Comparing the correction values of the water vapor transmission reflecting the thickness of the specimen under the multilayer condition showed that permeability was higher when the hydrophilic or hydrophobic layer was facing the humid environment. The opposite was true from the "push-pull" effect of absorption mechanism. In the case of moisture permeability, the more hydrophilic the surface facing the humid environment, the more permeable that water vapor diffuses and passes through. It was concluded that the "pull-push" effect, in which water vapor diffuses widely through the hydrophilic facing a humid environment and then passes through the hydrophobic layer, contributes to the improvement of permeability. Permeability differed according to the multilayer overlapping condition. When the relative humidity was high, the "pull-push" effect was insignificant. This is caused by water droplets absorption after the partial migration of water due to condensation. These results suggest that the overlapping conditions and properties of fabrics should vary depending on heavy sweating or not.

• Journal of Pharmaceutical Investigation
• /
• 제40권spc호
• /
• pp.97-102
• /
• 2010

A novel surface-attached solid dispersion is designed to improve the solubility and oral bioavailability of poorly water-soluble drugs without crystalline change. Accordingly, it draws increasing interest because of excellent stability and no pollution for accomplishing enhanced solubility and bioavailability, which have recently been highlighted in connection with a number of higher value-added poorly water-soluble drugs. In addition, excellent stability can be attained when the poorly water-soluble drugs are not dissolved but dispersed in water and provide no crystallinity change. This solid dispersion is given by means of attaching the dissolved carriers such as hydrophilic polymer and surfactant to the surface of dispersed drug particles followed by changing the hydrophobic drug to hydrophilic form. The aim of the present review is to outline the preparation, physicochemical property and bioavailability of novel surface-attached solid dispersion with improved solubility and bioavailability of poorly water-soluble drugs without crystalline change.

• 한국응용과학기술학회지
• /
• 제9권2호
• /
• pp.107-117
• /
• 1992

The synthesis and solution properties of polyglycerol alkyl ether($R_{12}Gn$) are described. The phase behavior, surface tension, cloud point and HLB value of polyglycerol dodecyl ether in aqueous solution and in mixed solution of surfactant /water /oil have been investigated and compared with values of polyoxyethylene dodecyl ether. The surface tension showed that $R_{12}Gn$ have sufficiently low values of surface tension and cmc to serve as useful polyoxyethylene alkyl ether. The mesophases appearing in the $R_{12}Gn$ systems were more stable in a high temperature range than the mesophases of polyoxyethylene alkyl ether systems. The cloud point and HLB data indicated that addition of one glycerol group was equivalent to the addition of three oxyethylene group units, as far as the hydrophilic property was concerned. The phase diagrams of the polyglycerol alkyl ether /dodecane /water systems showed that the solubilizing and emulsifying powers of $R_{12}Gn$ were greater than those of polyoxyethylene alkyl ether. It is concluded that the polyglycerol chain can be even more useful as hydrophilic group of nonionic surfactants than the polyoxyethylene chain.