• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.458-458
• /
• 2012

Fuel Cell is used stacking metal or polymer substrate. This hydro property of substrate surface is very important. Usually, surface property is hydrophilic. The surface oxidation of SUS is investigated through plasma treatments with an atmospheric-pressure dielectric barrier discharge (DBD) for increasing hydrophilic property. The plasma process makes an experiment under various operating conditions of the DBD, which operating conditions are treatment time, plasma gas mixture ratio, the plasma source supply frequency. Two kinds of SUS substrate, SUS-304 and SUS 316L, were used. Discharge frequency has a crucial impact on equipment performance and gas treatment. After the plasma treatment of a SUS plate, highly improved wettability was noted. But, when high oxygen supply, the substrate damaged seriously.

• 융복합기술연구소 논문집
• /
• 제5권1호
• /
• pp.13-17
• /
• 2015

In wafer level molding progress, the thermal releasing failure phenomenon is shown up as the important problem. This phenomenon can cause the problem including the warpage, crack of the molded wafer. The thermal releasing failure is due to the insufficiency of adhesion strength degradation of the molding tape. To solve this problem, we studied experimental method increasing the release property of the molding tape through the plasma surface treatment on the wafer substrate. In this research, the vacuum plasma treatment system is used for release property improvement of the molding tape and controls the operating condition of the hydrophilic($O_2$, 100kW, 10min) and hydrophobic($C_2F_6$, 200kW, 10min). In order to perform the peeling test for measuring the releasing force precisely, we remodel the micro scale material property evaluation system developed by Korea institute of industrial technology. In case of hydrophilic surface treatment on the wafer substrate, we can figure out the releasing property of molding tape increase. In order to grasp the effect that it reaches to the release property increase when repeating the hydrophilic treatment, we make an experiment with twice treatment and get the result to increase about 12%. We find out the hydrophilic surface treatment method using plasma can improve releasing property of molding tape in the wafer level molding process.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.110-110
• /
• 2017

Biological systems offer unique principles for the design and fabrication of engineering platforms (i.e., popularly known as "Biomimetics") for various applications in many fields. For example, the lotus leaves exhibit unique surfaces consisting of evenly distributed micro and nanostructures. These unique surfaces of lotus leaves have the ability of superhydrophobic property to avoid getting wet by the surrounding water (i.e., Lotus effect). Inspired by the surface topographies of lotus leaves, the artificial superhydrophobic surfaces were developed using various micro- and nanoengineering. Here, we propose new platforms that can control hydrophilic and hydrophobic property of surfaces by mimicking micro- and nanosurfaces of various natural leaves such as common camellia, hosta plantaginea, and lotus. Using capillary force lithography technology and polymers in combination with biomimetic design principle, the unique micro- and nanostructures mimicking natural surfaces of common camellia, hosta plantaginea, and lotus were designed and fabricated. We also demonstrated that the replicated polymeric surfaces had different hydrophilic and hydrophobic properties according to the mimicking the natural leaf surfaces, which could be used as a simple, but powerful methodology for design and fabrication of controlled hydrophilic and hydrophobic platforms for various applications in the field of agriculture and biological engineering.

• Korean Chemical Engineering Research
• /
• 제54권2호
• /
• pp.163-170
• /
• 2016

고분자 필름의 친수성을 향상시키기 위하여 우수한 친수성을 보이는 코팅 용액을 졸-겔법으로 합성하였다. 코팅 용액은 입자 직경이 15 nm 크기의 콜로이드 실리카에 다양한 실란커플링제인 아미노실란, 에폭시실란과 아크릴실란을 각각 반응시켜 제조하였다. 콜로이드 실리카에 아미노실란을 첨가한 코팅 용액은 바로 겔화가 진행되어 코팅 용액을 제조할 수 없었다. 반면에 에폭시실란을 첨가한 코팅 용액은 실란커플링제/콜로이드 실리카의 질량분율(R값)이 0.10~0.15에서 접촉각 $10{\sim}15^{\circ}$의 우수한 친수성을 나타내었다. 또한 아크릴실란을 첨가한 코팅 용액은 R값이 0.03~0.07에서 $5{\sim}10^{\circ}$의 접촉각을 나타내어 아미노실란과 에폭시실란을 사용했을 때 보다 우수한 친수성을 나타내었다.

• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.735-740
• /
• 2002

고분자 필름의 무적성을 향상시키기 위하여 우수한 친수성 및 높은 가시광선 투과율을 보이는 유기-무기 혼성 코팅용액을 졸-겔법으로 합성하였다. 코팅용액은 입자 직경이 15 nm 크기의 무기물인 콜로이드 실리카 용액(Ludox)에 유기 조성을 함유한 화합물인 GPS을 첨가하여 제조되었다. 실란 커플링제인 GPS는 콜로이드 실리카와 주변의 매트릭스(matrix)인 고분자 필름에 각각 강한 결합을 형성하여 두 개의 서로 다른 물질을 강하게 연결하는 결합제 역할을 한다. 강산성 조건 하에서 제조된 혼성 코팅용액으로 고분자 필름 위에 코팅한 경우는 코팅필름의 표면이 거의 균열이 없는 매끈한 미세구조를 보이는 반면, 약산과 염기성 조건 하에서 제조된 혼성 코팅용액으로 코팅한 경우에는 균열이 심한 미세구조를 보였다. 또한 pH 2의 산성 조건에서 제조한 필름은 우수한 친수성 및 높은 가시광선 투과율을 보인 반면, 염기성 조건으로 제조한 코팅필름은 친수성이 좋지 않았으며, 낮은 가시광선 투과율을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.745-748
• /
• 2002

A novel titania sol for the preparation of hydrophilic TiO2 films was synthesized from TiCl4. TiO2 films were prepared by spraying the sol on glass substrates and the hydrophilic properties of the films were invest igated with illumination of UV light. The contact angle of a water drop on the films decreased to less than 7˚, which indicates the excellent hydrophilicity of the TiO2 films.

• 한국염색가공학회지
• /
• 제23권2호
• /
• pp.131-139
• /
• 2011

This study surveyed on the synthesis of one-step type hydrophilic non-porous PU resin and the physical property of the coated fabric for the garment. Three kinds of chain extender such as MEG, 1,4-BD and NPG were used for the preparation of one-step type hydrophilic non-porous PU resin in order to examine the effect of chain extender on the physical properties of PU-coated fabric. And the effects of isocyanate on the physical properties of PU coated fabric were surveyed by mixing with various TDI and MDI ratios. In addition, the physical properties of the coated fabric treated with one-step type hydrophilic non-porous PU resin were examined according to the pre-treatment conditions such as cire finishing. Finally, the washing durability of the coated fabrics was assessed. The coated fabrics treated with PU resin synthesized with PEG1000, MEG and TDI/MDI (6/4) showed the best physical properties. Considering the pre-treatment conditions, best performance of hydraulic pressure, water vapor permeability, and water repellency were obtained with top roller rotation ratio of 150% under 50 ton pressure at $170^{\circ}C$.

• 한국응용과학기술학회지
• /
• 제33권3호
• /
• pp.483-491
• /
• 2016

나노실리카가 코팅된 유리 표면은 나노실리카 표면에 존재하는 친수성 수산기로 인해 방담성이 매우 증가하나, 실외에 설치된 유리에 코팅된 경우는 비에 의해 씻겨 나가 방담 특성의 내구성이 급격히 감소한다. 또한 나노실리카가 코팅된 유리 표면의 토폴로지는 광투과율 또는 반사방지 특성을 좌우하는 매우 중요한 인자이다. 이러한 나노실리카 코팅의 특성에 관한 내구성을 향상시키기 위하여 가교제로 테트라에틸오르소실리케이트 (TEOS)를 사용하여 나노실리카 (Ludox) 현탁액으로 친수성 나노실리카피막을 제조하였다. 산성 또는 염기성 수용액 중에서의 TEOS의 가수 분해 최적 조건도 물에 대한 접촉각 측정을 통하여 조사하였다. pH=4의 산성 조건에서 1.5 wt% 나노실리카-TEOS 코팅액으로 얻은 최종 투명한 친수성 코팅층은 매우 향상된 친수성에 대한 내구성뿐만 아니라, 코팅하지 않은 유리에 비해 약 2 % 포인트 정도 높은 가시광투과율을 나타내었다.

• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.83-90
• /
• 2011

Main objectives of this study were to investigate the effects of a lubricant, magnesium stearate, as blended in a hydrophilic matrix tablet and to identify significant factors using a tablet ejection force and a swelling property. The characteristics of tablet ejection were evaluated with three different compression forces (30, 40, and 60 MPa) and two controlled factors, amount of magnesium stearate and its mixing time. A hydrophilic model drug (terazosin HCl dihydrate) was regarded as a default factor. Tablet swelling was also evaluated. The optimal amount of PEG compared to PEO was set to be 88.50% w/w. As the amount of magnesium stearate was varied from 0.79% to 2.20% w/w, the amount of PEO and PEG was adjusted to meet the tablet's total weight while maintaining the ratio between the two excipients constant. As the mixing time of magnesium stearate was increased, the tablet ejection force and the swelling property were decreased. As the amount of magnesium stearate was increased, the tablet ejection force and the swelling property were decreased since the increased mixing time and the amount of magnesium stearate induced hydrophobic properties of the matrix tablet more effectively. The ejection force of the tablet increased as a result of increase in the compression force, which means that the breaking of tablet/die-wall adhesion energy was also increased when the compression energy was increased. The results gavea valuable guide how to choose suitable amount of the lubricant with processing conditions for the development of hydrophilic matrix formulations.

• 한국전기전자재료학회논문지
• /
• 제14권10호
• /
• pp.821-827
• /
• 2001

In this study performed to identify a degradation mechanism in macromolecular insulating material, the contact angel, surface potential decay, surface resistivity, and XPS analysis were compared after exposure of FRP laminate to plasma discharge. In the case of contact angle, the surface of specimen untreated showed weak hydrophobic property of 73。. However, the contact angle was decreased to 20。in the plasma-treated specimen. In the case of chemical changes arising form plasma treatment, carboxl radicals were generated mainly in the surface treated, which was rapidly changed to the hydrophilic one. In the corona potential decay study to determine the electrical changes of the surface, positive charges were rapidly decreased when compared with negative charges, leading to negative property in the surface of specimen not treated. However, in the case of the hydrophilic surface, lots of carboxl radicals acting as positive polarity were generated, resulting in positive surface. Owing to such positive surface, charges of negative polarity applied were rapidly decreased.