• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.1
• /
• pp.11-18
• /
• 2002

Compomer, like resin composite, undergoes shrinkage during setting. But, due to the structure of glass ionomers and their hydrophilic nature, water sorption and subsequent expansion may lead to compensation of the shrinkage. The purpose of this study was to, evaluate the change of mliroleakage after 30day-water-storage of compomer and composite resin. 40 sound third molars were used for the microleakage test. Z-100 resin was used for the control groups(Group I and III), Dyract AP for the experimental groups(Group II and IV). The storage time was 1 day in Group I, II and 30days in Group III, IV. The result from the this study can be summarized as follows; 1. No significant difference could be found in microleakage of occlusal margin between each group(p>0.05). 2. In microleakage of gingival margin, no significant difference could be found between group I and II, and between group I and III (p>0.05). 3. Group IV was showed less microleakage than group II and group III in gingival margin(p<0.05).

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1843-1845
• /
• 1999

We have investigated the dielectric characteristics of palmitic acid(PA), stearic acid (SA) and arachidic acid(AA) Langmuir-Blodgett(LB) films because these fatty acid systems have a same hydrophilic group and a different hydrophobic one (alkyl chain length). In this work. fatty acid systems were used as LB films and the status of the deposited films was confirmed by evaluating the transfer ratio. the UV absorption and the capacitance. Also, the dielectric characteristics such as the frequency-capacitance characteristics and the dielectric dispersion and absorption characteristics of PA, SA and AA through-plane were measured. The relative dielectric constants of PA, SA and AA LB films were about $2.6\sim4.6$, $2.4\sim4.1$ and $2.2\sim3.8$, respectively. That is, the relative dielectric constants were decreased in proportion to the chain length of methylene group. And, the dielectric dispersion and absorption of each fatty acid LB films have arisen from spontaneous polarization of dipole polarization in the range of $10^4\sim10^5[Hz]$.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.4
• /
• pp.613-620
• /
• 2017

Objectives: The purpose of this study is to investigate the antibacterial effect of Streptococcus mutans of tea tree ingredient. Methods: The experimental groups were each given with different concentrations (30 or 50 vol%) of tea tree prepared in saline solution. The control group applied only saline solution. The tea tree coating of the specimen were examined under a scanning electron microscope. For the antibacterial activity test of the tea tree, the contact angle of the tea tree- coated specimen's surface was analyzed. The antibacterial effect against Streptococcus mutans was determined by counting the colony forming units (CFU). The statical statics were evaluated by using one-way ANOVA and paired t-test. Results: The tea tree treated group of hydrophilic more than non treated group. Antibacterial experiments demonstrated that tee tree solution was effective against Streptococcus mutans. However there was no significant difference in depending solution concentration groups. Conclusions: The antimicrobial activity of the tea tree containing solution showed its potential for use as coating for denture and medical materials.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.1
• /
• pp.11-19
• /
• 1996

The liposomes have been developed in many drugs and cosmetics fields. The liposomes prepared with main compounds of the intercellular lipids and lecithin. Amphiphile nonionic surfactants used for (PEG) n-sitosterol(n=5), diethanolamine cetylphosphate. The effect of gelation for liposomes have been on swelling reaction which have been mixed phospholipid with polyol-group at the high temperature. There were very good encapsulated properties of the active ingredients whether hydrophilic-group(magnesium ascorbyl phosphate, allantoin, sodium hyaluronate) and hydrophobic-group(vitamin-E acetate, vitamin-A palmitate). Optimum condition of liposomes were passed five times in the microfluidizer(700bar), wetting reaction temperature was at $95{\pm}5^{\circ}C$ for a hours. Particle size distribution of the vesicles should be within range 50-560nm(mean 200nm). The stability of liposomes for the course of time was stabilized for six months at $45^{\circ}C$. Application of the cosmetic was prepared moisturizing cream with liposomes of the phospholipid base.

• Archives of Plastic Surgery
• /
• v.44 no.3
• /
• pp.194-201
• /
• 2017

Background Platelet-rich plasma (PRP) contains high concentrations of growth factors involved in wound healing. Hydrogel is a 3-dimensional, hydrophilic, high-molecular, reticular substance generally used as a dressing formulation to accelerate wound healing, and also used as a bio-applicable scaffold or vehicle. This study aimed to investigate the effects of PRP and hydrogel on wound healing, in combination and separately, in an animal wound model. Methods A total of 64 wounds, with 2 wounds on the back of each nude mouse, were classified into 4 groups: a control group, a hydrogel-only group, a PRP-only group, and a combined-treatment group. All mice were assessed for changes in wound size and photographed on scheduled dates. The number of blood vessels was measured in all specimens. Immunohistochemical staining was used for the analysis of vascular endothelial growth factor (VEGF) expression. Results Differences in the decrease and change in wound size in the combined-treatment group were more significant than those in the single-treatment groups on days 3, 5, 7, and 10. Analysis of the number of blood vessels through histological examination showed a pattern of increase over time that occurred in all groups, but the combined-treatment group exhibited the greatest increase on days 7 and 14. Immunohistochemical staining showed that VEGF expression in the combined-treatment group exhibited its highest value on day 7. Conclusions This experiment demonstrated improved wound healing using a PRP-hydrogel combined treatment compared to either treatment individually, resulting in a decrease in wound size and a shortening of the healing period.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.142-151
• /
• 2017

Cationic surfactants have a bactericidal effect and the study for effective development of them became important parts in the industry. There have been increasing researches that focus on the development of products having not only outstanding features but also safety and biodegradability. In this work, novel ester-type cationic surfactants were obtained via Michael addition reaction. Intermediates were quantitatively prepared by the Michael addition reaction between alkyl acrylate and amine compounds under mild conditions without solvent and catalyst. The intermediates were quaternized with dimethyl sulfate. HQ21 with two hydrophobic groups and a hydrophilic group and HQ22 with two hydrophobic groups and two hydrophilic groups were obtained. The structures of the products were characterized by 1H-NMR, HR-MS and FT-IR and biodegradability of the products were tested.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.391-396
• /
• 2004

Plastic shrinkage crack occurs at the exposed surfaces of freshly placed concrete due to consolidation of the concrete mass and rapid evaporation of water from the surface. This so-called shrinkage crack is a major concern for concrete, especially for flat structures such as pavements, slabs for industrial factories and retaining walls. This study has been performed to obtain the plastic shrinkage and the permeability of hydrophilic poly vinyl alcohol(PVA) fiber reinforced mortar and concrete. Test results indicated that PVA fiber reinforced cement composite showed an ability to reduce the total crack area and the maximum crack width (as compared to plain and polypropylene fiber reinforced concrete). Also, according to the permeability test result, it was found that PVA fiber reinforced cement composite was more reducing than polypropylene fiber reinforced cement composite.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.546-567
• /
• 2015

Silicone-based surfactants consist of a hydrophobic organosilicone group coupled to one or more hydrophilic polar groups, while the hydrophobic groups of hydrocarbon surfactants are hydrocarbons. Silicone surfactants have been widely used in many industrial fields starting from polyurethane foam to construction materials, cosmetics, paints & inks, agrochemicals, etc., because of their low surface tension, lubricity, spreading, water repellency and thermal and chemical stability. A wide range of silicone surfactant structures are required to provide the functional diversity for reflecting the necessities in the various applications. This review covers the basic properties and the synthetic schemes of polydimethylsiloxane and reactive polysiloxanes as hydrophobic siloxane backbones, the main reaction schemes, such as hydrosilylation reaction, for coupling reactive polysiloxanes to hydrophilic groups, and the synthetic schemes of the main polysiloxane surfactants including polyether-, ionic-, carbohydrate-type surfactants.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.510-516
• /
• 1997

O/W emulsions were prepared by adding water to the solution containing amphiphilic resin and the mixed emulsifier of cetyl alcohol polyoxyethylene(20) sorbitan monooleate. Phase behavoir of these emulsions was studied at various HLB(Hydrophilic Lipophilic Balance) values and temperatures. The polar oil emulsion containing the amphiphilic resin showed improved phase stability at various temperatures. Model compounds which contain one of the functional groups in the amphiphilic resin were used in the polar oil phase in order to study the effect of interaction between the functional group and the emulsifier on the phase stability of emulsion. These model compound emulsions showed the phase stability order of poly(acrylic acid)

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2589-2594
• /
• 2009

Aging phenomena of plasma polymer films were studied by using the surface analysis techniques of contact angle measurement, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOFSIMS), and atomic force microscopy (AFM). The polymer films were grown on an aluminum substrate by using a plasma polymerization method from a gas mixture of acetylene and helium, and the films were subsequently modified to have a hydrophilic surface by oxygen plasma treatment. Aging of the polymer films was examined by exposing the samples to water and air environments. The aging process increased the hydrophobicity of the surface, as revealed by an increase in the advancing contact angle of water. XPS analysis showed that the population of oxygen-containing polar groups increased due to the uptake of oxygen during the aging, whereas TOF-SIMS analysis revealed a decrease in the polar group population in the uppermost surface layer. The results suggest that the change in surface property from hydrophilic to hydrophobic nature results from the restructuring of polymer chains near the surface, rather than compositional change of the surface. Oxidative degradation may enhance the mobility and the restructuring process of polymer chains.