• 한국토양비료학회지
• /
• 제32권3호
• /
• pp.274-278
• /
• 1999

토성 조사 특히 토양 중의 점토 함량의 측정은 토양과 관련된 연구에서 흔히 이루어지는 분석이다. 본 연구에 관련된 연구에서 흔히 이루어지는 분석이다. 본 연구에서는 현재까지 점토 함량 측정에 널리 이용되고 있는 표준 hydrometer법이나 pipette법과 비교하여 보다 간편하고 신속한 분석법으로 제안되어 있는 micro-pipette법의 이용 가능성을 검토하였다. Micro-pipette법과 hydrometer법으로 측정된 점토 함량은 유의성이 높은 1:1의 상관관계를 가졌으며. micro-pipette법치 분석의 정밀도는 hydrometer법에 비교하여 크게 떨어지지 않는 것으로 나타났다. 또한 micro-pipette법은 짧은 침강 시간과 작은 침강 용기를 사용함으로써 작은 실험실 공간에서 많은 시료를 분석할 수 있었다.

• 대한건축학회논문집:구조계
• /
• 제34권5호
• /
• pp.13-18
• /
• 2018

In this research, regarding the type three blast furnace slag (BS) regulated by KS F 2563 and supplied to actual ready mixed concrete plant, the fineness on specification and actually measured fineness by Blain test were compared, and by applying the hydrometer method used for early prediction of concrete strength, the feasibility of the hydrometer method for acquisition inspection of BS was analyzed. Additionally, the influence of various fineness of BS on properties of cement mortar was also assessed. According to the experimental results of this research, correlation of fineness values between specification and actually measured data were not matched. In the case of the rapid evaluation method using hydrometer, a good relation was shown between the fineness data obtained from hydrometer and Blain test. furthermore, from the cement mortar properties test, there was a good relation was obtained between fineness data from rapid evaluation method by hydrometer and cement mortar properties, while there was no clear relation between fineness data from specification and cement mortar properties. Hence, as a qulity controlling method of BS fineness, a rapid evaluation method using hydrometer is suggested as a new method.

• 한국토양비료학회지
• /
• 제17권4호
• /
• pp.325-329
• /
• 1984

객토원(客土源)과 객토대상지(客土對象地)의 판정(判定)에 필수적(必須的)인 점토함량(粘土含量) 측정(測定)의 간이화(簡易化)를 위한 새로운 간이기기(簡易器機)를 개발(開發)코자 Hydrometer의 소형화(小型化)에 초점(焦點)을 두고 새로운 기기(器機)를 제작(製作)하여 기존(旣存) Pipette법(法)과 비교(比較)한 결과(結果)는 다음과 같다. 1. 길이가 16cm, 눈금범위(範圍)가 0~45%인 Hydrometer와 10g채취용(採取用) 간이토양시료(簡易土壤試料) 채취용기(採取容器)가 설계(設計) 제작(製作)되었다. 2. 간이기기(簡易器機)는 유효(有效)길이 (측정깊이)가 적어서 152H Hydrometer 보다 같은 시간(時間)에 훨씬 적은 입자(粒子)의 함량(含量)을 측정(測定)할 수 있었다. 3. 입제(粒劑) 분산제(分散劑)를 용해(溶解)시키고 시료(試料)를 넣은 후 2분간(分間) 강(强)하게 진탕(振蕩)한 후 10분(分)만에 측정(測定)된 값은 Pipette법(法)에 의한 토양(土壤)의 점토함량(粘土含量)과 비교(比較)한 결과(結果) t=0.573 < t 0.05=1.98로서 두 방법간(方法間)에는 차이(差異)가 없었다.

• 대한건축학회논문집:구조계
• /
• 제34권6호
• /
• pp.29-34
• /
• 2018

In this research, regarding the cement supplied to ready mixed concrete plant, the feasibility of rapid acquisition test for cement fineness using hydrometer which used for early strength evaluation of concrete was analyzed. Additionally, regarding the rapid test with hydrometer control factors were provided. As a result of analysis, quality control using hydrometer was possible with the regressive equation obtained in five minute between density of suspension and fineness of cement powder. As the control factors, dispersing admixture, replacing kerosene as a medium, and temperature of cement and water were evaluated. According to the control factor evaluation, the tap water was optimum as a medium and calibration of keeping the temperature of water to $20^{\circ}C$ or correction factor was needed for density results. Finally, it is considered that the suggested rapid quality evaluation method using hydrometer is cheaper and easier method than currently used Blaine test.

• 한국건설순환자원학회논문집
• /
• 제6권1호
• /
• pp.43-49
• /
• 2018

본 연구에서는 고로슬래그의 원료인 수쇄슬래그를 Ball mill로 분말도에 다양한 변화를 주어 제조한 다음 종전에 진행되었던 Hydrometer를 이용한 비중계법 콘크리트 조기 강도 추정의 원리를 적용하여 BS의 분말도 품질을 저렴하면서도 간편하고 신속하게 평가함으로써 BS 분말도 수입검사에 효과적으로 활용할 수 있도록 함에 있어 그 가능성을 분석하고자 하였다. 실험 결과 BS의 분말도가 클수록 액체밀도계의 침하시간이 지연되는 것으로 나타났으며, 3분의 혼탁액 밀도와 분말도의 상관관계 회귀식 y = 198 120 x - 193 936(R=0.9398)을 활용할 시 BS 분말도의 신속한 품질평가가 가능할 것으로 판단되었다. 따라서 레미콘 인수검사에서 BS의 분말도 품질 신속평가로 본 연구에서 제시하는 방법을 적용할 경우 저렴하고 간단하며 신속하게 BS 분말도 평가가 가능할 수 있을 것으로 분석되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.167-168
• /
• 2017

With the recent increase in demand for construction there has been an increase in the use of the raw material cement when mixing concrete; managing quality of cement powder, therefore, is most important. Therefore this study sought at first to develop a rapid appraisal using the Hydrometer method researched previously, for it was thought that when suspending cement in a solution and applying the Hydrometer method to it the temperature changes in the solution would have a great effect on the density value of the Hydrometer method; yet there has been no report of such influence factors. Therefore after analyzing the influence factors that the type of suspending solution and changes in temperature could have on rapid appraisal of fineness, using the Hydrometer method, this study was able to determine that using water at 20℃ was the most appropriate, and with every temperature increase of 10℃ the value of fineness should also be increased above or below 7% as well.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.20-21
• /
• 2017

There have been reports in the media about some refineries that omit the refining process and deliver raw material for reasons of cost reduction, shortening of production time, etc. Also, in most RMC factories acceptance inspection is not conducted on account of issues with the proficiency of the equipment and cost issues; instead only scores are relied upon. Therefore this study sought to analyze the relation between the value of the density of FA actually delivered to RMC companies, attained with the Hydrometer method, and its fineness, to see whether the quality of FA can be evaluated statistically. Results led to the conclusion that there is a problem in terms of credibility in the fineness of FA shown on the test report. Upon analyzing the difference between the fineness of FA as measured using Blaine's air permeability method and its density of the Hydrometer method, the correlation was found to be satisfactory; therefore the possibility of a FA fineness quality evaluation could be proved as well.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.87-88
• /
• 2018

The change in the degree of powder in cement is very important because it plays a major role in the reaction in the concrete. In this study, we intend to apply the principle of early estimation of concrete strength using the non-middling method previously conducted to the quality evaluation of cement powder. In other words, it is proposed to analyze the potential of Hydrometer density values and the data of temperature variation in the trust solution to propose a method of acceptance inspection. According to the experimental results, the quick evaluation of the cement distributorship will be possible if the resulting regression results are used : y = 161867.4 x₁ + 117.953 x₂ - 165437 (R = 0.9158).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.85-86
• /
• 2018

In this study, we previously conducted a quick evaluation of cement powder map using mesiline and hydrometer. The experiment also confirmed the possibility of rapid quality evaluation of cement powder. In this study, further studies have been conducted to apply speed and cost more economical than conventional methods, and the possibility of applying this research is to be analyzed. The result of the experiment was 500 mL of a bottled water bottle with a solid edge for measurement convenience, and the hydrometer was determined to be B type. In addition, density values of each other by powder during the same time period are considered to be measurable, indicating large differences.

• 한국건축시공학회지
• /
• 제17권2호
• /
• pp.119-125
• /
• 2017

일부 플라이애시 정제공장에서는 생산시간 단축, 원가절감 등의 이유로 정제과정을 생략하고 플라이애시를 유통시킨 예가 보고된바 있다. 따라서 본 연구에서는 메스실린더 속에 FA와 물을 넣고 혼탁액화 시킨 다음 액체밀도계를 띄워 밀도를 측정하는 방법 (비중계법)으로 FA의 품질평가 가능성을 분석하고자 하였다. 연구결과, 시리즈 1 실험방법의 결정으로 메스실린더 용량은 1,000cc 이고, 물 1,000cc에 대한 FA의 질량은 100g인 조건일 때가 최적의 방법이 됨을 알 수 있었다. 시리즈 2의 실험에서는 정분, 원분, 리젝트애시 등 다양한 분말도를 가진 FA의 종류변화에 상기 액체밀도계의 밀도 값을 적용 하였다. 실험연구결과 FA의 정제여부 및 분말도 품질변화에 따른 분말도와 액체밀도계의 밀도 값 간에는 상관성이 우수하여 FA 품질평가가 가능함을 알 수 있었다. 이때 측정시간은 3분의 액체밀도계 밀도 측정 값으로 FA의 분말도 등 품질을 평가하는 수입검사 방법이 최적임을 알 수 있었다.