• 제목/요약/키워드: Hydrolysis degree

검색결과 280건 처리시간 0.025초

효소처리한 참깨박 농축단백질의 가수분해정도에 따른 기능성 (functional Properties of Sesame Protein Concentrate as Degree of Hydrolysis by Enzyme Treatments)

  • 윤시혜;박정륭;전정례
    • 동아시아식생활학회지
    • /
    • 제4권3호
    • /
    • pp.87-96
    • /
    • 1994
  • This study was carried out to investigate the effect of hydrolysis by proteolytic enzymes on the functional properties of sesame protein concentrate. Sesame protein concentrate was hydrolyzed with papain, pepsin and trypsin to obtain 10% and 20% degree of hydrolysis. The nirogen solubility in water was increased with increasing the degree of hydrolysis. Bulk density was increased by enzymatic hydrolysis but water absorption capacity was increased only in the case of pepsin-hydrolyzed SPC. Higher fat absorption capacity was found in SPC with 10% DH than SPC with 20% DH. Emulsifying activity was also increased by enzymatic hydrolysis except SPC with 10% DH by papain.

  • PDF

Measurement of Degree of Hydrolysis of a PA66/GF Composite using a py-GC/MS analysis

  • Lee, Jong-Young;Kim, Kwang-Jea
    • Elastomers and Composites
    • /
    • 제52권1호
    • /
    • pp.59-68
    • /
    • 2017
  • The effect on the hydrolysis resistance properties by the addition of maleic anhydride grafted EMDM (MA-g-EPDM) and PP (MA-g-PP) to a PA66/GF composite was investigated with respect to the mechanical properties, thermal properties, and morphology. The degree of hydrolysis of the PA66/GF composite was measured using py-GC/MS analysis. When compared to the PA66/GFcomposite in MEG/water solution, the composites where MA-g-EPDM and MA-g-PP were added to PA66/GF showed a higher degree of hydrolysis resistance, impact strength, and thermal properties, whereas their tensile strength, tensile modulus, flexural strength and flexural modulus decreased. As immersion time in the solution increases, the rate of tensile strength drop of the MA-g-PP added composite appeared lower than that of the PA66/MA-g-EPDM/GF and PA66/GF composites. The py-GC/MS analysis confirmed the formation of PA66 hydrolysis reaction by products such as carboxylic acid and alkylamine with increasing immersion time.

Angiotensin I Converting Enzyme Inhibitory Activity of Krill (Euphausia superba) Hydrolysate

  • Kim Dong-Soo;Park Douck-Choun;Do Jeong-Ryong
    • Fisheries and Aquatic Sciences
    • /
    • 제5권1호
    • /
    • pp.21-27
    • /
    • 2002
  • Angiotensin I converting enzyme inhibitory activities of shelled krill (Euphausia superba) hydrolysates by autolysis and by hydrolysis with commercial proteases were analyzed. Among the proteases, Alcalase was the most effective protease for the hydrolysis of krill considering the degree of hydrolysis $(87.5\%)$ and the ACE inhibitory activity $(60\%)$. Four hour hydrolysis suggested as the most suitable and economic. In order to establish the optimum hydrolysis condition of krill, degree of hydrolysis and ACE inhibitory activity as affected by Alcalase concentration and water amount added were statistically analyzed by response surface methodology (RSM). The optimum hydrolysis condition was $2.0\%$ Alcalase hydrolysis in 2 volumes (v/w) of water at $55\% for 4 hr. The hydrolysate prepared from the optimum hydrolysis condition was fractionated by molecular weight. The lower molecular weight fraction showed the higher ACE inhibitory activity. $IC_{50}$ of the fraction under 500 Da was 0.57mg protein/mL.

Optimization of Alcalase for Krill Byproduct Hydrolysis and Antioxidative Activities by Response Surface Methodology

  • Kim, Kyoung-Myo;Lee, Da-Sun;Nam, Min-Hee;Yoo, Hong-Seok;Kim, Seon-Bong;Chun, Byung-Soo;Lee, Yang-Bong
    • Preventive Nutrition and Food Science
    • /
    • 제15권4호
    • /
    • pp.316-321
    • /
    • 2010
  • Krill byproduct was hydrolyzed with Alcalase 2.4L to produce functional ingredients for high antioxidative activities against 1,1-dimethyl-2-picryl-hydrazyl (DPPH) radical and Fe. The objective of this study was to investigate the optimum condition for degree of hydrolysis and antioxidative activity of enzymatic hydrolysate produced with the commercial Alcalase using response surface methodology (RSM) with a central composite rotatable design (CCRD). The ranges of independent variables were pH 7.6~10.4 for initial pH and $50.9{\sim}79.1^{\circ}C$ for hydrolysis temperature and their dependent variables were degree of hydrolysis, Brix, amount of phenolic compounds, DPPH-scavenging activity and Fe-chelating activity. RSM with CCRD was well designed to investigate the optimum condition for functional ingredients with high antioxidative activities using Alcalase 2.4L because of their high $R^2$ values of the range of 0.93~0.99 except the $R^2$ value of 0.50 for the amount of total phenolic compounds. The optimum hydrolysis conditions were pH 9.5 and $62^{\circ}C$ for degree of hydrolysis (DH) and pH 9.1 and $64^{\circ}C$ for DPPH-scavenging activity by response surface methodology. The yield of DH and DPPH-scavenging activity were $14.1{\pm}0.5%$ and $10.5{\pm}0.2%$, respectively. It is advantageous to determine the optimum hydrolysis conditions of krill and its by-products for the creation of different kinds of food products, as well as to increase the usage of marine protein sources.

불용성 세리신의 효소 가수분해 (Enzyme Hydrolysis of Insoluble sericin)

  • 김정호;배도규
    • 한국잠사곤충학회지
    • /
    • 제42권2호
    • /
    • pp.104-108
    • /
    • 2000
  • To hydrolyze insolule sericin the enzyme hydrolysis was used, and then obtained the results as given belows. When insoluble sericin was hydrolyzed by enzyme treatment, the solubility was best at pH 7, 60$\^{C}$ and was slightly increased both above 2 hours treatment and above 10% of enzyme concentration. As the results of electrophoresis, the distribution of molecular weight of sericin powder obtained by enzyme hydrolysis was very weak and showed in the wide range having no distinguishable band. Average degree of polymerzations (A.D.P.) of sericin hydrolyzed by enzyme were about 4.1∼6.3, average molecular weight were about 470∼730. The whiteness of the sericin powder obtained by enzyme hydrolysis was high and increased slightly with higher treatment concentration of enzyme. As the results of amino acid analysis, the amino acid analysis, the amino acid composition of the sericin powder from the enzyme treatment were similar to which located at near 230$\^{C}$ and 320$\^{C}$. The peak of near 230$\^{C}$ could not been found in the sericin powder obtained by enzyme hydrolysis.

  • PDF

재료적 특성(섬유 및 금속)이 종이 기록물의 열화도에 미치는 영향 (Effect of Properties of Fiber and Mineral Filler on Aging of Archival Documents)

  • 신종순
    • 한국인쇄학회지
    • /
    • 제30권3호
    • /
    • pp.13-21
    • /
    • 2012
  • This study was carried out to evaluate the stability of archival documents produced using papers. The properties of archival documents depend on the type of fillers of papers that are used such as fiber, non cellulose fiber, and mineral. The physio-chemical characteristics of archival documents were analyzed by employing acid hydrolysis against cellulose fiber substances. Fibers of Korean hand-made (Hanji), flex, and cotten papers showed higher pH and the degree of polymerization (DP) than wood fiber and mechanical fiber. Mechanical pulp containing 12.8% of lignin showed the greatest decrease of DP due to acid hydrolysis, and this resulted in increase of degree of aging. The filler found to clay and talc did not contain metal such as $Fe^{+2}$, $Fe^{+3}$, and $Cu^{+2}$. The alkaline metals such as Mg, Ca, and Ti showed greater resistance to acid hydrolysis.

불용성 세리신의 알칼리 가수분해 (Alkali Hydrolysis of Insoluble Sericin)

  • 김정호;배도규
    • 한국잠사곤충학회지
    • /
    • 제42권1호
    • /
    • pp.31-35
    • /
    • 2000
  • When insoluble sericin was hydrolyzed by treatment of NaOH solution, the solubility was increased with higher treatment temperature and longer treatment time. Whereas it was decreased in addition of NaHSO$_3$. As the results of electrophoresis in sericin powder obtained by the NaOH treatment, a distinguishable band was not confirmed. Average degree of polymerizations(A.D.P.) of sericin hydrolyzed by NaOH solutions were about 19.6∼22.1 and average molecular weight(M.W.) were about 2,200∼2,500. The longer hydrolysis time increased the whiteness of sericin powder. As the results of amino acid analysis, the contents of Thr., Tyr., and Ser. were decreased in NaOH hydrolysis as compared to HCl hydrolysis. In DSC analysis, thermal deformation and pyrolysis peak located at near 230$\^{C}$ and 320$\^{C}$, respectively.

  • PDF

우유 단백질의 Allergenicity에 관한 연구 (A Study on the Allergenicity of Milk Protein)

  • 정은자
    • 한국식품영양학회지
    • /
    • 제8권2호
    • /
    • pp.79-87
    • /
    • 1995
  • It is generally known that the protein of talk has allergenicity and the allerenicity Induces allergic diseases. Finding methods to reduce the allergenicity of the food and develop methods to make low allergic food is the purpose of this study. For this study, 1 tried various experimental methods : heat treatment, irradation with ultraviolet and microwaves treatment with polyphosphate, enzyme hydrolysis and PCA inhibition test using guinea pigs and degrees of hydrolysis. The results obtained are as follows. Heat treatment reduced allergenicity of milk protein. The higher the heat, the better the effect. Irradiating with ultraviolet and microwave increased both the degree of protein hydrolysis and PCA inhibition reduced the allergenicity. Ultraviolet was more effective than microwaves on milk protein. Enzyme treatment increased the degree of hydrolysis and PCA inhibition, and reduced allergenicity considerably. Neutrase was more effective than alcalase on milk protein. Adding Polyphosphate did not induced protein hydrolysis, but increased PCA inhibition and reduced allergenicity.

  • PDF

Process Development for the Enzymatic Hydrolysis of Food Protein: Effects of Pre-treatment and Post-treatments on Degree of Hydrolysis and Other Product Characteristics

  • Chae, Hee-Jeong;In, Man-Jin;Kim, Min-Hong
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제3권1호
    • /
    • pp.35-39
    • /
    • 1998
  • An enzymatic process was developed to produce protein hydrolysater form defatted soya protein. Various unit operations were tried, and the effects of pre- and post-treatments on the product characteristics such as degree of hydroylsis (DH), free amino acid content (%FAA) and average molecular weight (MW) were investigated. The use of acid washes showed no difference in %DH. Increasing pH during pre-cooking gave lower %DH. Alkaline cooking made too much insoluble protein, thus the protein yield was too small. A better hydrolysis with more acceptable taste was obtained when the combination of Neutrase/Alcalase/Flavourzyme was used in place of Alcalase/Flavourzyme combination; Untoasted defatted soya was more effective on the proteolysis than toasted one. The MW of the evaporated and spray dried product was higher than that of undried product, due to precipitation of low-solubility components. When ultrafiltration and the product concentration carried out the product separation by reverse osmosis, the solubility and the taste of the product were improved. The difference between enzyme hydrolysate and acid hydrolysate was significant in free amino acid composition, especially in tyrosine, phenylalanine, glutamine and asparagine.

  • PDF

Influence of preparation parameters on rheological behavior and microstructure of aqueous mixtures of hyaluronic acid/poly(vinyl alcohol)

  • Park Hyun-Ok;Hong Joung Sook;Ahn Kyung Hyun;Lee Seung Jong;Lee Seong Jae
    • Korea-Australia Rheology Journal
    • /
    • 제17권2호
    • /
    • pp.79-85
    • /
    • 2005
  • Aqueous mixtures of hyaluronic acid and poly(vinyl alcohol) system and hydrogels thereof were introduced to obtain new bioartificial materials that have excellent mechanical properties, biocompatibility and enhanced rheological properties. The interactions between hyaluronic acid and poly(vinyl alcohol) and/or borax were investigated by rheological measurements. Preparation parameters of the aqueous mixtures were mixture composition, the degree of hydrolysis of poly(vinyl alcohol) and borax concentration. From the rheological behavior, it could be deduced that the key factor of the interaction between hyaluronic acid and poly(vinyl alcohol) was the hydrogen bonding between them and the effect was pronounced with borax. Enhanced viscosity was observed at the composition of $20wt\%$ of hyaluronic acid solution and $80wt\%$ of poly(vinyl alcohol) and borax solution. Rheological properties were influenced by the degree of hydrolysis of poly(vinyl alcohol) and borax concentration. As the degree of hydrolysis and borax concentration increased, rheological properties increased due to the increased hydrogen bonding and networking of hyaluronate aggregates. Physical hydrogels from hyaluronic acid and poly(vinyl alcohol) were prepared and the composition dependence of the gels was rheologically investigated as well.