• 품질경영학회지
• /
• 제16권1호
• /
• pp.43-48
• /
• 1988

Most of silicone used for water repellent finish is MHP (methyl hydrodiene polysiloxane), which is formed by hydrolysis and condensation polymerization of MHD (methyl hydrodiene dichlorosilane: Me H Si $Cl_2$). The cross-linking theory explains the water repellent mechanism of MHP. The silicone finish on fiber could improve in handle, softness, abrasion resistance, soil repellency, tear strength and crease resistance, as well as water repellency. According to using method silicone-water repellent finishing agents, could be devided into air dry type and curing type. MHP is the typical curing type of water repellent finishing agent, and this type requires the curing temperature above $150^{\circ}C$ at least. High curing temperature is the very drawback of this curing type. For this reason, there has been global interest in the lowering of its temperature. The objective of this study is to investigate merits of alkali treatment for silicone finishing by ANOVA and LSD (least significant difference).

• 접착 및 계면
• /
• 제16권1호
• /
• pp.22-28
• /
• 2015

본 연구에서는 수분산 폴리우레탄의 내가수분해성 및 접착력을 향상시키기 위하여 polyester polyol, epoxy resin, 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylol propionic acid (DMPA)를 사용하여 epoxy를 함유한 수분산 폴리우레탄을 합성하였다. 또한 합성된 수분산 폴리우레탄의 물성은 DSC, UTM, adhesion test 등을 통해 평가하였다. 합성된 수분산 폴리우레탄의 Tg는 $-50^{\circ}C$ 부근에서 나타났으며, epoxy resin의 함량이 증가함에 따라 Tg도 상승하는 결과를 나타내었다. Epoxy resin의 함량이 증가함에 따라 인장강도는 증가하였고, 신율은 감소하였다. 또한 접착력 및 내가수분해 접착력은 polyol : epoxy = 99 : 1에서 최고값을 나타내었다.

• Corrosion Science and Technology
• /
• 제22권2호
• /
• pp.115-122
• /
• 2023

This study aimed to elucidate causes of corrosion of heat transport pipes and air vents installed under a manhole of heat transport facilities and suggest effective anticorrosive measures by applying paints or adhesive tapes. It was found that air vent corrosion was attributed to corrosion under insulation caused by the inflow of water and the enrichment of chloride ions. The infiltrated water caused a hydrolysis of polyurethane foam (PUF) insulation by concentrating chloride ions at the interface between a pipe and the PUF. As insulator deteriorated, more chloride ions were eluted as confirmed by ion chromatograph (IC) analysis. As an effective method to prevent air vent corrosion, different types of paints and adhesive tapes with higher corrosion resistance on chloride ions were applied and environmental resistance tests were performed with those samples. Based on environmental test results of samples exposed to 10% HCl solution, it was revealed that a wax tape was the most adequate from a viewpoint of stability at operating condition, environmental resistance, surface treatment, and field applicability.

• 상하수도학회지
• /
• 제25권4호
• /
• pp.479-488
• /
• 2011

Nanofiltration was performed with polyaluminium chloride solutions at different pH conditions to understand effects of inorganic compounds on aluminum hydrolysis products, i.e., three distinctive groups of aluminum species: polymeric Al at low pH; $Al(OH)_3$ at neutral pH; and ${Al(OH)_4}^-$ at high pH. The PACl solution was prepared to be approximately 4.0mM and adjusted to the designated pH. The influence of inorganic compounds on Al species fouling was investigated with 4.9mM $CaCl_2$ and 3.5mM $MgSO_4$ because $Ca^{2+}$, $Mg^{2+}$, $Cl^-$, ${SO_4}^{2-}$ are the most common inorganics in the drinking water. NF membrane fouling was measured by flux decline rate. The impact of $CaCl_2$ was not significant on the individual Al hydrolysis products fouling. However, the flux decline rate was drastically changed in the presence of $MgSO_4$. The concentration of particulate matters was considerably increased possibly due to interaction between Al species and ${SO_4}^{2-}$ where $MgSO_4$ was introduced. The particulates were accumulated on the membrane and enhanced the hydraulic resistance of the cake layer. In addition, conductivity removal of the membrane was decreased when Al-hydroxide was dominant due to reduction of membrane surface charge. The rejection of $Ca^{2+}$and $Mg^{2+}$ were considerably different, which implys that composition of inorganics paly a role on conductivity removal.

• 미생물학회지
• /
• 제43권4호
• /
• pp.250-255
• /
• 2007

Deinococcus radiodurans recA는 이 미생물의 방사선 저항성을 나타내는 표현형에 필수적이며 재조합성 DNA 수선 과정에 관여한다. 이 과정에서 RecA 단백질은DNA와 결합하여 반응의 활성 종인 RecA nucleoprotein 필라멘트를 형성한다. DNA-의존성 ATPase 활성과 함께, RecA 단배질의 외가닥 DNA 혹은 이중가닥 DNA와의 상호작용은 RecA 단백질이 관여하는 반응의 중심과정으로 이에 관한 분석을 시도하였다. D. radiodurans RecA 단배질은 DNA에 결합한 DNA-단백질 복합체만이 ATPase 활성을 나타내므로, ATP (혹은 dATP) 가수분해를 측정함으로써 RecA와 외가닥 DNA와의 상호작용 정도를 분석하였다. D. radiodurans RecA 단백질은 외가닥 DNA의 염기 구성의 이질성에 영향을 받았으며, homopolymer인 poly(dT)와의 상호작용에서 가장 높은 가수분해 활성을 보였다. Homopolymer인 합성 DNA-의존성 ATP 및 dATP의 가수분해는 pH 6.0과 9.0의 범위에서 다소 일정한속도로 일어났으며 최적 pH는 7.0과 7.5 사이였다. 외가닥 DNA-의존성 ATPase 활성은 염의 존재에 영향을 받아 KCl이 존재하면 다소 억제되나, K-glutamate가 존재하면 오히려 촉진되었다. RecA 단백질과 외가닥 DNA의 상호작용을 ATP 가수분해로 분석하였을 때 2 mM 이상의 magnesium 이온이 DNA 결합반응에 필요하였으며, 비교적 넓은 범위의 pH에서 외가닥 DNA와의 결합반응이 일어나며, 이러한 결합반응은 당량적인 비(1:3, RecA protein: DNA nucleotide)로 일어났다.

• 한국잠사곤충학회지
• /
• 제41권1호
• /
• pp.54-60
• /
• 1999

염산 또는 수산화나트륨 수용액의 농도, 온도, 시간 등 처리조건에 따른 작잠견사의 가수분해율을 측정하였으며 산처리 작잠분말과 알칼리처리 작잠분말의 형태 및 구조특성을 주사전자현미경, 적외선 분광분석, X-선 회절분석 등의 방법으로 분석한 결과 다음과 같은 결과를 얻었다. 1. 작잠견사에 대한 염산 및 수산화나트륨의 처리농도와 온도가 높을수록 또한 처리시간이 길어질수록 작잠견사의 가수분해율은 증가하는 경향을 나타내었으나 고온, 고농도의 조건하에서 수산화나트륨을 작잠견사에 처리하는 경우 작잠견사의 가수분해율이 오히려 떨어지는 경향을 보였다. 2. 산 및 알칼리 처리에 의하여 제조된 작잠분말의 형태는 용해도가 30 wt% 부근에서는 섬유상의 형태를 유지하였으며 산처리 분말의 경우 용해도가 증가함에 따라 섬유축 방향으로 조각난 미세한 입자형태를 나타내었으나 알칼리처리 분말의 경우에는 부정형의 입자형태를 나타내었다. 3. 적외선 분광분석 결과 작잠분말은 처리조건과 무관하게 ${\beta}$-sheet 구조의 특성을 반영하는 1635, 1532, 1226, 960, 700 cm$^{-1}$ 흡수대와 ${\alpha}$-helix 구조의 특성을 반영하는 616 cm$^{-1}$ 흡수대가 뚜렷하게 나타나 작잠분말의 주요 conformation은 ${\beta}$-sheet 구조와 ${\alpha}$-helix 구조임을 확인하였다. 4. X-선 회절분석 결과 가수분해율이 낮을 경우 (35 wt%)에는 ${\beta}$-sheet 구조와 ${\alpha}$-helix 구조에 기인하는 회절 피크가 뚜렷하게 나타났으나 가수분해율이 80 wt% 이상으로 증가하면 2${\theta}$=17.1$^{\circ}$ 및 20.0$^{\circ}$의 회절피크만 강하게 나타났다.

• 한국환경과학회지
• /
• 제12권4호
• /
• pp.481-485
• /
• 2003

Two types of polyimide/silica composite films were prepared using sol-gel method through hydrolysis and polycondensation of tetraethoxysilane (TEOS) with the polyamic acid (PAA) and end-capped PAA solution. Samples were characterized by the means of differential thermogravimetry, X-ray diffractometry, scanning electron microscopy, universal test, impedance analyzer, chemical resistance test, etc. All of the PAA/silanol solutions heat-treated at 300$^{\circ}C$ for 6h were transformed to polyimide/silica composites. It has been demonstrated that the properties of polyimide/silica composites were affected by the amount of silica addition and the bend type existed between polyimide and silica.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.196-196
• /
• 2010

In this work, we deposited SWNTs/silane hybrid thin films by multiple spray-coating on glass substrate, and examined their electrical response for humidity. Generally silane binders which are often used in CNT solution to adhere CNTs to substrate well can be easily functionalized to each own group on the surface of CNTs after they are hardened by way of the hydrolysis reaction. We investigated how silane binders (TEOS,, MTMS and VTMS) in SWNTs hybrid thin films make effect to their electrical response on humidity. As the result, we observed that the resistance in the sample using TEOS was changed dramatically while it was almost invariant in the samples using MTMS and VTMS for increasing humidity.

• 한국가금학회지
• /
• 제22권2호
• /
• pp.105-115
• /
• 1995

The balance of microbial populations in the gastrointestinal (GI) tract of all warm-blooded animals is critical to the maintenance of health and resistance to disease. The composition of the populations can be altered by diet and environment, making the host animal susceptible to disease, and reducing growth rate and feed efficiency. Some feed additives including antimicrobial agents, prohiotics or yucca extract have been used to promote growth and feed utilization. There is evidence that part of growth-promoting effect of those feed additives results from the suppression of microbial urease activity or ammonia production in the GI contents of animals. Over 200 microbial species have been known to produce urease and the product of urea hydrolysis, ammonia, is toxic to animals. Carefully tested probiotics or other urease-suppressing agents can be a possible alternative to antimicrobial agents including antibiotics as growth promotants used for animals feeds.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.235-240
• /
• 2006

Polyacrylonitrile (PAN) fiber was grafted with casein after alkaline hydrolysis and chlorination reactions of the original fiber. The structures and morphologies of the casein grafted fiber were characterized by Fourier transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), and scanning electron microscope (SEM). Moisture absorption, specific electric resistance, water retention value, and mechanical properties were also investigated. The results showed that casein was grafted onto the surface of the PAN fiber and the grafted PAN fiber presented better hygroscopicity compared with the untreated fiber. With proper tensile strength, the modified fiber could still meet the requirement for wearing. A mechanism was proposed to explain the deposit of casein on the synthetic acrylic fiber.