• 대한약리학회지
• /
• 제17권1호
• /
• pp.27-32
• /
• 1981

It has been known that ethanol stimulates the secretion of gastric acid regardless of its route of administration. Recently, however, some studies have challenged this view and claimed that ethanol inhibits the gastric acid secretion. This study was undertaken to investigate the effects of ethanol on the gastric acid secretion in anesthetized rat in respect to the route of administration and the concentration of alcohol. Normal saline (pH adjusted to 6.0) was used as standard perfusion solution and ethanol was mixed as 0.8, 1.7, 5, 10 and 20%. Four ml of perfusion fluid was given into stomach via gastric tube and drained from duodenal tube every 5 min. Acid secretion was measured by back titration to pH 6.0 with N/20 NaOH and expressed as ${\mu}Eq/5$ min. Low concentration of ethanol up to 1.7% in perfusion solution caused little changes in acid secretion, but moderate concentration such as perfusion of 5% or 10% ethanol solution inhibited both the basal and histamine-induced gastric secretion. Moreover, loss of perfused acid was seen by 20% ethanol, which means back diffusion of hydrogen ions into the gastric mucosa. However, intravenous administration of ethanol, maintained at the level of 0.1% alcohol in blood, caused significant stimulation of gastric acid. We, therefore, conclude that in anesthetized rat ethanol has dual effects on acid secretion, i.e., inhibiting and enhancing by oral and intravenous administration, respectively, but further investigation is necessary to clarify these effects.

• 센서학회지
• /
• 제5권2호
• /
• pp.15-20
• /
• 1996

감지막 내부로의 수소이온 확산은 pH-ISFET에서 드리프트로 작용하므로 초박막화된 감지막은 드리프트 시간을 최소화할 것이라는 새로운 인식을 가지고 pH-ISFET의 최대 단점인 드리프트 특성을 개선하기 위하여 sol-gel법으로 $Ta_{2}O_{5}$ 수소이온 감지막을 약 $70{\AA}$정도로 초박막화시킨 ISFET를 제조하고 그 동작특성을 조사하였다. 제조한 $Ta_{2}O_{5}$ 게이트 pH-ISFET는 약 59 mV/pH의 높은 감도를 나타내었고, pH $3{\sim}11$ 범위에서 pH에 따른 ISFET의 출력전압변화는 우수한 선형성을 나타내었으며, 또한 출력전압의 변동에 의한 평균 pH 드리프트는 약 0.06 pH/day로서 비교적 작은 값을 나타내었다.

• Journal of Dairy Science and Biotechnology
• /
• 제35권1호
• /
• pp.25-31
• /
• 2017

본 연구는 닭의 분뇨로부터 악취저감 방안으로, 쌀뜨물에 L. sakei의 배양조건과 저장 중 안정성을 검토하였다. 그리고 닭 분뇨로부터 미생물을 분리 동정하고, 이들 미생물에 대한 L. sakei의 항균능력을 검토하였다. 또한 L. sakei 함유 쌀뜨물 발효액이 닭 분뇨의 악취를 저감시키는지에 대하여 연구를 수행하였다. 연구결과, 쌀뜨물은 L. sakeiv의 생장에 좋은 영양소로 확인되었으며, 저장 기간 중 생존력도 강한 것으로 증명되었다. 또한 L. sakei는 닭의 분뇨로부터 분리된 악취유발 미생물의 생장 또한 억제하는 것으로 나타났다. 이러한 항균작용 또는 정균작용으로 사회적으로 문제가 되는 축산분뇨에 대하여, L. sakei를 이용해 배양된 쌀뜨물은 악취 유발을 저감할 수 있는 것으로 사료된다. 더욱이 쌀뜨물은 가치가 인정되지 않아 그대로 하수도로 버리게 되어 환경오염을 유발원으로 인식되었는데, 유산균 발효에 의한 악취 제거, 기능성 사료의 이용 등 산업적으로 많은 응용이 적용될 것으로 기대된다.

• 대한기계학회논문집B
• /
• 제29권9호
• /
• pp.1013-1021
• /
• 2005

In this work, $TiO_2$ nanoparticles were synthesized using a N2-diluted hydrogen coflow diffusion flame. The effects of flame temperature on the crystalline structure and the size of formed nanoparticles were investigated. The maximum centerline temperature of the flame ranged from 1,920K for $H_2-only$ flame to 863k for $81\%\;N_2-diluted$ flame. The morphology and the crystal structure of $TiO_2$ nanoparticles were analyzed by a TEM and a XRD, respectively. The particle size distribution was also measured by using a scanning mobility particle size. (SMPS). The mean particle diameter was calculated from the TEM images depended on the flame temperature, having minimum at about 1,look. Based on the SMPS measurements, the mean particle diameter of $TiO_2$ nanoparticles at flame temperatures > 1,300K was smaller than that at flame temperatures < 1,300K. From the XRD analysis, it was evident that the anatase fraction increased with decreasing the flame temperature. The portion of anatase phase in $TiO_2$ nanoparticles might be greater than $80\%$ when the flame temperature was lower than 1,000K.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1379-1389
• /
• 1999

A new technique for control of size and shape of flame-made particles is Introduced. The characteristic sintering time can be controlled Independently of collision time by heating the particles with irradiation of laser because the sintering time strongly depends on temperature. A coflow oxy-hydrogen diffusion flame burner was used for $SiCl_4$ conversion to silica particle. Nanometer sized aggregates irradiated by a high power CW $CO_2$ laser beam were rapidly heated up to high temperatures and then were sintered to approach volume-equivalent spheres. The sphere collides much slower than the aggregate, which results in reduction of sizes of particles maintaining spherical shape. Light scattering of Ar ion laser and TEM observation using a local sampling device were used to confirm the above effects. When the $CO_2$ laser was irradiated at low position from the burner surface, particle generation due to gas absorption of laser beam occurred and thus scattering intensity increased with $CO_2$ laser power. At high irradiation position, scattering intensity decreased with $CO_2$ laser power and TEM image showed a clear mark of evaporation and recondensation of particles for high $CO_2$ laser power. When the laser was irradiated between the above two positions where small aggregates exist, average size of spherical particles obviously decreased to 58% of those without $CO_2$ laser irradiation with the spherical shape. Even for increased carrier gas flow rate by a factor of three, TEM photograph also revealed considerable reduction of particle size.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.231-237
• /
• 1996

Defect equilibrium equations were modelled, and the relations of P $o_2$, venus x were derived using the mass action law. The dominant defect species active in a specified region were determined by fitting the curve of experimental data to the calculated curve of log P $o_2$, versus log x for each theoretical model. The calculated curve for (2:1:2) and (Er')$^{x}$ in the hyperstoichiometric $U_{1-y}$E $r_{y}$ $O_{2＋x}$ and that for (2Er'quot;)$^{x}$ $_{dec}$ in the hypostoichiometric $U_{1-y}$E $r_{y}$ $O_{2－x}$ are in good agreement with the present experimental results. The sintering behavior of Er-doped U $O_2$ is observed with erbium content in oxidizing and reducing atmospheres. For sintering in oxidizing atmosphere, sintered density decreases as increasing y in $U_{1-y}$E $r_{y}$ $O_{2＋x}$. However, in hydrogen atmosphere, sintered density decreases as increasing y at lower erbium content but the density increases again above y=0.10. In oxidizing sintering conditions, the formation of (Er'U')$^{x}$ clusters hinders the diffusion of cations, and hence the sinterability of Er-doped U $O_2$ decreases. In reducing atmosphere of Er-doped U $O_2$ for higher Er concent, the oxygen vacancies make (Er')$^{x}$ cluster decompose by charge compensation and the concentration of mobile cations increases, thereby improving the sinterability.ntration of mobile cations increases, thereby improving the sinterability.ability.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.24-30
• /
• 2004

Analysis model for the two-phase catalytic reactor is presented. With the progress in development of micro thermofluidic devices, needs fur understanding of the phenomena in two phase reaction in cm scale has been arisen. To investigate thermal and reactive performance of down scaled two phase reactor simple analysis model that is a kind of lumped flow model is proposed. Analysis model presented is based on the experiment on mm scale model reactor. Target experiment is catalytic decomposition of 70wt％ hydrogen peroxide with existence of perovskite L $a_{0.8}$S $r_{0.2}$Co $O_3$ catalyst. It is composed of balance equations of mass and energy. Each phase is considered to be a species fur the simplicity. Axial diffusion and transversal distribution of properties are neglected. Two phase catalytic reaction is modeled as successive gasification of liquid lump around catalyst and reaction in gas phase. Heat transfer is modeled by model function ofNu number. Modeled Nu is expressed as Nu=N $u_{0}$ (1＋ $a_1$( $a_2$ $T^{-}$ $a_3$)exp( $a_4$ $T^{-1}$)exp( $a_{5}$ z). Transfer coefficients are determined by the comparison of experimental results. With the model, heat transfer characteristics are investigated. Also by the mass transfer coefficient, characteristics in mass transfer is investigated. With the result basic understanding on design and analysis of mm scale two-phase reactive device is obtained. Also it can be further applied to micro scale reactive device fabricated by micromachining.ing..

• 대한기계학회논문집B
• /
• 제34권7호
• /
• pp.689-696
• /
• 2010

디젤엔진은 높은 열효율과 우수한 연비 성능 등의 장점을 가지고 있으나, 기화된 연료와 주변 공기가 혼합된 후 착화되는 과정을 거치기 때문에 이론 공연비 영역에서는 질소산화물(NOx) 배출이 증가되는 문제점을 가지고 있다. 최근 활발히 연구되고 있는 높은 정화 효율을 가진 LNT 촉매는 희박 분위기 조건에서는 NOx를 흡장하게 되고 과농한 분위기에서는 환원 분위기 형성을 통하여 NOx를 저감시키게 된다. 희박 공연비에서 동작하는 디젤 엔진에서는 이러한 환원 과정을 이루기 위해 주기적으로 과농한 분위기를 형성해주어야만 하는데, 이러한 연구는 NOx 저감을 위해 HC를 포함한 환원제의 농도를 제어하는 기술로서 본 연구에서는 디젤을 연료로 하는 수소농후가스 발생장치를 이용하여 LNT 촉매에 환원제로서 수소농후가스를 직접 공급하는 방식으로 LNT 촉매의 NOx 저감 특성을 파악하였다.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.520-524
• /
• 2011

The properties of manufactured SOFC unit cell using decalcomania method were investigated. The decalcomania method that used in ceramics, dish, vessel and etc. was the very simple process. The SOFC unit cell manufacturer using decalcomania method is very simple process. Especially, the decalcomania method was the most suitable manufacturing method for the segmented type SOFC. The cathode, prevent diffusion layer (PDL), anode functional layer (AFL) and electrolyte were manufactured using decalcomania method on porous anode support. The sintered electrolyte at 1450$^{\circ}C$ for 2 h using decalcomania method was very dense, and the thickness was about 10 ${\mu}m$. The cathode, the PDL and the AFL were manufactured using decalcomania method and was sintered at 1250$^{\circ}C$ for 2 h, and the sintered electrodes were the porous. As a result, with humidified hydrogen used as fuel, the cell with an 15 ${\mu}m$-thick AFL exhibited maximum power densities of 0.246, 0.364, 0.504W/$cm^2$ at 700, 750, 800$^{\circ}C$, respectively.

• 한국세라믹학회지
• /
• 제51권3호
• /
• pp.197-200
• /
• 2014

We investigated the influence of blistering on $Al_2O_3$/SiON stacks and $Al_2O_3$/SiNx:H stacks passivation layers. $Al_2O_3$ film provides outstanding Si surface passivation quality. $Al_2O_3$ film as the rear passivation layer of a p-type Si solar cell is usually stacked with a capping layer, such as $SiO_2$, SiNx, and SiON films. These capping layers protect the thin $Al_2O_3$ layer from an Al electrode during the annealing process. We compared $Al_2O_3$/SiON stacks and $Al_2O_3$/SiNx:H stacks through surface morphology and minority carrier lifetime after annealing processes at $450^{\circ}C$ and $850^{\circ}C$. As a result, the $Al_2O_3$/SiON stacks were observed to produce less blister phenomenon than $Al_2O_3$/SiNx:H stacks. This can be explained by the differences in the H species content. In the process of depositing SiNx film, the rich H species in $NH_3$ source are diffused to the $Al_2O_3$ film. On the other hand, less hydrogen diffusion occurs in SiON film as it contains less H species than SiNx film. This blister phenomenon leads to an increase insurface defect density. Consequently, the $Al_2O_3$/SiON stacks had a higher minority carrier lifetime than the $Al_2O_3$/SiNx:H stacks.