• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.87.2-87.2
• /
• 2017

RR~Telescopii is a symbiotic nova exhibiting accretion activities through gravitational capture of the slow stellar wind from a Mira variable. We present high resolution spectra of RR~Tel obtained with MIKE and the 6.5 m Magellan-Clay telescope, in which we find broad features with FWHM exceeding $10{\AA}$ at 6545, 6825, 7082, 7023 and $7053{\AA}$. They are formed through Raman-scattering with atomic hydrogen of far-UV He II 1025, O~VI 1032, $1038{\AA}$ and C II 1036 and $1037{\AA}$. We compute the Raman conversion efficiencies using the case B recombination theory for He II emissions, which are used in turn to infer the intrinsic line luminosities of O VI and C II. The Raman O~VI features are characterized by double-peaked profiles with a peak separation ~ 60km/s, pointing out the presence of an accretion disk with a physical size of ~ sub AU. In contrast, Raman C II features exhibit profiles with a simple peak and a narrower width ~40 km/s, indicating that C II is formed in a much more extended region. The weak C II multiplet at 1335, $1336{\AA}$ found in the IUE spectral archive and the absence of C II 1036, $1037{\AA}$ in the FUSE archive show that far-UV C II lines suffer heavy interstellar extinction consistent with the distance of ~ 2.5 kpc to RR Tel.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.4
• /
• pp.170-177
• /
• 2006

Optimum design of flow channel in the separation plate of Proton Exchange Membrane Fuel Cell is very prerequisite to reduce concentration over potential at high current region and remove the water generated in cathode effectively. In this paper, fully 3 dimensional computational model which solves anode and cathode flow fields simultaneously is developed in order to compare the performance of fuel cell with parallel and interdigitated flow channels. Oxygen and water concentration and pressure drop are calculated and i-V performance characteristics are compared between flows with two flow channels. Results show that performance of fuel cell with interdigitated flow channel is hi민or than that with parallel flow channel at high current region because hydrogen and oxygen in interdigitated flow channel are transported to catalyst layer effectively due to strong convective transport through gas diffusion layer but pressure drop is larger than that in parallel flow channel. Therefore Trade-off between power gain and pressure loss should be considered in design of fuel cell with interdigitated flow channel.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.55-59
• /
• 2009

As one of the methods for recycling the FRP from the small and medium waste ships, separation of roving layer from the mat has some merits in a sense of the recycling energy and the environmental effects. Similar characteristics, however, between the roving and the mat even with different ratio of the resin and the glass and the thickness of the roving, much thinner than the mat, make the mechanically automatic differentiation difficult. In this study spectrochemical differentiation between the two layers has been made using (1) boiling concentrated sulfuric acid which can dissolve the resin in the FRP layer, (2) methanol and isopropanol solution saturated with KOH which can dissolve the glass, or (3) hydrogen fluoride(HF) solution which can reacts with $SiO_2$ fragments of the glass. Furthermore coloring water-soluble dye following the HF treatment makes the roving layer more distinguishable photo-physically.

• Membrane Journal
• /
• v.25 no.2
• /
• pp.107-114
• /
• 2015

PTMSP-NaA zeolite composite membranes were prepared by adding 0~50 wt% NaA zeolite to PTMSP. The membranes were characterized by FT-IR, $^1H$-NMR, GPC, DSC, TGA, SEM. The permeabilities of $H_2$ and $N_2$ gases through PTMSP-NaA zeolite composite membranes was studied as a function of NaA zeolite contents. According to TGA measurements, when zeolite was inserted into the polymer, weight loss temperature and weight loss wt% of PTMSP-NaA zeolite composite membranes were decreased. Based on SEM observation, NaA zeolite was dispersed in the PTMSP-NaA zeolite composite membrane with the size $2{\sim}5{\mu}m$. The permeability of PTMSP-NaA zeolite composite membranes increased added as NaA zeolite content increased. On the contrary, the selectivity ($H_2/N_2$) of the composite membranes decreased as NaA zeolite content increased. PTMSP-NaA zeolite composite membrane showed better permeability and selectivity ($H_2/N_2$) of $H_2$ and $N_2$ than PTMSP-NaY zeolite composite membrane.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.7-11
• /
• 2001

The influence of temperature and calcium concentration on the gelation kinetics of purified Aigeok system has been investigated by small deformation oscillatory measurement. DE(degree of esterification) of the present sample was indicated of low methoxyl Aigeok polysaccharide by FT-IR. The calcium induced gelation of Aigeok has been studied. Both moduli reached the saturation value during the period of experiments. Rate constant increased with increasing calcium concentration, however above 4.08 mM calcium chloride caused a sudden drop in gel strength. The experimental result that the decrease in gel strength at high calcium concentration was seems to be phase separation or competitive inhibition between calcium ions. The storage and loss shear moduli decreased with increasing temperature. The rate constant of Aigeok system remarkably dropped above $35^{\circ}C$. Thus hydrogen bonding is prior to hydrophobic interaction for Aigeok molecule.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.892-898
• /
• 2005

A long, bis(monodentate), linking Schiff-base ligand L (py-CH=N-$C_6H_4$-N=CH-py) was prepared from 1,4-phenylenediamine and 3-pyridinecarboxaldehyde by the Schiff-base condensation. Ligand L has two terminal pyridyl groups capable of coordinating to metals through their nitrogen atoms. In contrast, the same reaction between 1,2-phenylenediamine and 3-pyridinecarboxaldehyde produced a mixture of imidazol isomers (2-pyridin-3-yl-1H-benzoimidazole), which are connected to one another by the N-H…N hydrogen bonding to form a tetramer. From Zn($NO_3)_2{\cdot}6H_2O$ and ligand L under various conditions, one discrete molecule, trans- [Zn($H_2O)_4L_2]{\cdot}(NO_3)_2{\cdot}(MeOH)_2$, and two 1-D zinc polymers, [Zn$(NO_3)(H_2O)_2(L)]{\cdot}(NO_3){\cdot}(H_2O)_2$ and [Zn(L) (OBC)($H_2O$)], were prepared. In ligand L, the N$\ldots$N separation between the terminal pyridyl groups is 13.994 $\AA$, with their nitrogen atoms at the meta positions (3,3’) in a trans manner. The corresponding N$\ldots$N separations in its compounds range from 13.853 to 14.754 $\AA$.

• Korean Journal of Materials Research
• /
• v.5 no.6
• /
• pp.732-742
• /
• 1995

Effects of the substrate pretreatment on uncleation density of the diamond thin films have been investigated. The film was prepared using the hot-filament CVD reactor with the mixture of methane and hydrogen. The substrate pretreatment was done in three different ways: predeposition of carbon on the substrate, soot on the substrate, and graphite on the substrate. All three cases enhanced the nucleation density of diamond. And the effect was more marked in the first and the second cases than in the third one. In the first case where the substrate was predeposited by the carbon phase, a very smooth and uniform film of diamond could be obtained. Since the bound strength between the substrate and the predeposited carbon phase is relatively weak, separation of the diamond film layer from the substrate was found to be easy.

• Carbon letters
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2003

Recently, the control of pore-characteristics of nano-porous materials has been studied extensively because of their unique applications, which includes size-selective separation, gas adsorption/storage, heterogeneous catalysis, etc. The most widely adopted techniques for controlling pore characteristics include the utilization of pillar effect by metal oxide and of templates such as zeolites. More recently, coordination polymers constructed by transition metal ions and bridging organic ligands have afforded new types of nano-porous materials, porous metal-organic framework(porous MOF), with high degree and uniformity of porosity. The pore characteristics of these porous MOFs can be designed by controlling the coordination number and geometry of selected metal, e.g transition metal and rare-earth metal, and the size, rigidity, and coordination site of ligand. The synthesis of porous MOF by the assembly of metal ions with di-, tri-, and poly-topic N-bound organic linkers such as 4,4'-bipyridine(BPY) or multidentate linkers such as carboxylates, which allow for the formation of more rigid frameworks due to their ability to aggregate metal ions into M-O-C cluster, have been reported. Other porous MOF from co-ligand system or the ligand with both C-O and C-N type linkage can afford to control the shape and size of pores. Furthermore, for the rigidity and thermal stability of porous MOF, ring-type ligand such as porphyrin derivatives and ligands with ability of secondary bonding such as hydrogen and ionic bonding have been studied.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.43-46
• /
• 2010

As one of the methods for recycling the FRP used for the small and medium-sized waste ships, separation of the roving layer from the mat has some merit in a sense of the recycling energy and the environmental effects. Similar characteristics between the roving and the mat make the mechanically automatic differentiation difficult. They, however, contain different ratio of the resin and the glass and the thickness. In this study photo physical differentiation between the two layers has been made using (1) boiling concentrated sulfuric acid which can dissolve the resin in the FRP layer and (2) hydrogen fluoride(HF) solution which can reacts with $SiO_2$ fragments of the glass. Furthermore coloring the FRP sample with water-soluble dye following the HF treatment makes the roving layer more distinguishable photophysically. The implementation of HF treatment has been successfully tested in this study.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.715-726
• /
• 2023

This study suggested that protective panels should be installed as sacrificial members as a safety design method for structures with potential explosions such as hydrogen charging stations to minimize direct damage to the structure and have resilience. To this end, the focus of the experiment is on quantitatively evaluating the impact of the structure when the protection panel is installed closely or spaced apart from the structure in a high-speed collision situation of the projectile. The experimental design used steel plates instead of concrete structural members mainly used in the past for excellent reproducibility, and the impact of structural members was compared and analyzed through deformation differences on the back of the steel plate. In addition, the impact of changes in the physical properties of the elastic body used as a separation material for the protective member and the difference in shock wave transmission time according to the protective member and the elastic body on the structural member was investigated.