• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.6
• /
• pp.609-628
• /
• 2015

Thie study presents the biomass-derived jet (bio-jet) fuel production technologies for greenhouse gas (GHG) reduction in aviation sector. The aviation sector is responsible for the 2% of the world anthropogenic $CO_2$ emissions and the 10% of the fuel consumption: airlines' costs for fuel reach 30% of operating costs. In addition, the aviation traffic is expected to double within 15 years from 2012, while fuel consumption and $CO_2$ emissions should double in 25 years. Biojet fuels have been claimed to be one of the most promising and strategic solutions to mitigate aviation emissions. This jet fuel, additionally, must meet ASTM International specifications and potentially be a100% drop-in replacement for current petroleum jet fuel. In this study, the current technologies for producing renewable jet fuels, categorized by alcohols-to-jet, oil-to-jet, syngas-to-jet, and sugar-to-jet pathways are reviewed for process, economic analysis and life cycle assessment (LCA) on conversion pathways to bio-jet fuel.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.6
• /
• pp.642-647
• /
• 2018

Gas compressors are mostly driven by motors. It is important to measure the power of motors to evaluate their power efficiency, because the mechanical loads of gas compressors are always varied. In order to measure the power given to the driving motors, the torque should be measured. Manufacturers of compressors usually use the torque data to calculate the compressors qualities such as power consumption, efficiencies and failures. In general, measurements for the shaft torque of the compressors have been based upon contact types, strain gauges. In the cases of larger compressors, the contact type of strain gauges have several disadvantages such as large size and high cost. In this study, a relatively inexpensive and simple torque sensing technique that is not restricted to shaft diameter is introduced using visualization technique. Particle image velocimetry (PIV) has been adopted to complete non-contact torques measurements for rotating motors. In order to compare the performance of the newly constructed torque measurement technique, torque measurement by a transducer based on MEMS technology has been performed simultaneously during experiments.

• International Journal of Oral Biology
• /
• v.39 no.1
• /
• pp.35-40
• /
• 2014

Halitosis is caused by consumption of certain foods or drinks and production of volatile sulfur compounds (VSCs) by periodontopathogens. VSCs-related halitosis is not easily removed using mechanical or chemical therapies such as dental floss, plaque control and mouth rinse. Lactobacillus are known to be probiotics and stimulate immune systems of human. Furthermore, L. casei ATCC 334 and L. rhamnosus GG have an effect on protection of dental caries in vitro studies. The aim of this study was to investigate effect of Lactobacillus on halitosis by Fusobacterium nucleatum- and Porphyromonas gingivalis-producing VSCs and to analyze inhibitory mechanism. The periodontopathogens were cultivated in the presence or the absence Lactobacillus, and the level of VSCs was measured by gas chromatograph. For analysis of inhibitory mechanisms, the susceptibility assay of the spent culture medium of Lactobacillus against F. nucleatum and P. gingivalis was investigated. Also, the spent culture medium of Lactobacillus and periodontopathogens were mixed, and the emission of VSCs from the spent culture medium was measured by gas chromatograph. L. casei and L. rhamnosus significantly reduced production of VSCs. L. casei and L. rhamnosus exhibited strong antibacterial activity against F. nucleatum and P. gingivalis. The spent culture medium of L. casei inhibited to emit gaseous hydrogen sulfide, methyl mercaptan and dimethyl sulfide from the spent culture medium of periodontopathogens. However, the spent medium of L. rhamnosus repressed only dimethyl sulfide. L. casei ATCC 334 may improve halitosis by growth inhibition of periodontopathogens and reduction of VSCs emission.

• Journal of Korean Vacuum Science & Technology
• /
• v.7 no.2
• /
• pp.27-32
• /
• 2003

A large cryo-pumping system composed of 4 cryosorption pumps was designed and manufactured to satisfy the pressure requirements of the NBI test stand. The cryosorption pump consists of a thermal shield/baffle assembly and a cryopanel coated with activated carbon granules. The thermal shield is cooled by liquid nitrogen, and the cryopanel by a commercial helium refrigerator. The operation characteristics and vacuum performance of the cryosorption pump were investigated. The cooling down time of the cryopanel to 20 K was about 6 hours with a liquid nitrogen consumption rate of about 35 L/hr. The maximum pumping speed of the cryosorption pump for the hydrogen gas measured by the steady pressure method was about 90,000 L/s.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.218.2-218.2
• /
• 2010

저분자량의 가스와 물이 물리적 결합으로 이루어진 가스 하이드레이트는 상대적으로 많은 양의 가스가 포집될 수 있다는 특성을 이용하여 다양한 분야에서 활발한 연구가 진행되고 있다. 본 연구에서는 매립지에서 발생되는 매립가스를 하이드레이트의 원리를 이용하여 효율적으로 저장 및 수송하기위한 공정에 적용하기위해 필요한 매립지 가스 하이드레이트의 상평형에 대한 특성을 분석하고자한다. 일반적으로 매립지 가스에는 메탄이 약 50%, 이산화탄소가 약 35%, 질소가 약 6% 포함되어 있으며 그 밖에 산소, 수분, 암모니아 황화수소 메르캅탄 등 할로겐 계통을 포함한 탄화수소계화합물 수십여종이 포함되어 있다. 이러한 매립지가스를 하이드레이트화 하기위해서는 매립지가스에 포함된 다양한 성분들이 하이드레이트 형성에 미치는 영향을 알아볼 필요가 있다. 특히 황화수소의 경우 독성이 있으며, 실제 플랜트에서 장비의 부식등 악영향을 미치므로 이와 관련한 기초 연구가 필요하다. 따라서 본 연구에서는 메탄, 이산화탄소, 황화수소가 각각 49.9%, 50.05%, 500ppm의 조성으로 이루어진 혼합가스를 이용하여 하이드레이트 생성 및 해리 시 거동을 측정하고 그 상평형 영역을 기존데이터와 비교분석 하였다. 25bar, 36bar에서 측정한 상평형 데이터는 한국해양대학교 에서 측정한 결과와 마찬가지로 실제 상평형 영역이 CSMHYD 프로그램으로 예측한 것보다 하이드레이트의 안정영역이 약 2bar 정도 높게 형성되는 것을 확인하였으며, $CH_4+CO_2+H_2S$ 혼합가스 하이드레이트의 생성 시 mol consumption은 $CH_4+CO_2$ 혼합가스 하이드레이트와 유사하게 나타났다. 이 결과로 유추하건대, 황화수소의 첨가는 하이드레이트의 형성 압력을 높이지만, 하이드레이트 형성률에는 크게 영향을 미치지 않는다고 할 수 있다.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.1
• /
• pp.109-113
• /
• 2016

Techno-economic evaluation of Non-Capture $CO_2$ Utilization (NCCU) technology for the production of high-value-added products using greenhouse gas ($CO_2$) was performed. The general scheme of NCCU process is composed of $CO_2$ carbonation and brine electrolysis process. Through a carbonation reaction with sodium hydroxide that is generated from brine electrolysis and $CO_2$ of the flue gas, it is possible to get high-value-added products such as sodium bicarbonate, sodium hydroxide, hydrogen & chloride and also to reduce the $CO_2$ emission simultaneously. For the techno-economic study on NCCU technology, continuous operation of bench-scale facility which could treat $2kgCO_2/day$ was performed. and based on the key performance data evaluated, the economic evaluation analysis targeted on the commercial chemical plant, which could treat 6 tons $CO_2$ per day, was performed using the net present value (NPV) metrics. The results showed that the net profit obtained during the whole plant operation was about 7,890 mKRW (million Korean Won) on NPV metrics and annual $CO_2$ reduction was estimated as about $2,000tCO_2$. Also it was found that the energy consumption of brine electrolysis is one of the key factors which affect the plant operation cost (ex. electricity consumption) and the net profit of the plant. Based on these results, it could be deduced that NCCU technology of this study could be one of the cost-effective $CO_2$ utilization technology options.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.105-105
• /
• 2012

We have developed a photoemission-assisted plasma-enhanced chemical vapor deposition (PAPE-CVD) [1,2], in which photoelectrons emitting from the substrate surface irradiated with UV light ($h{\nu}$=7.2 eV) from a Xe excimer lamp are utilized as a trigger for generating DC discharge plasma as depicted in Fig. 1. As a result, photoemission-assisted plasma can appear just above the substrate surface with a limited interval between the substrate and the electrode (~10 mm), enabling us to suppress effectively the unintended deposition of soot on the chamber walls, to increase the deposition rate, and to decrease drastically the electric power consumption. In case of the deposition of DLC gate insulator films for the top-gate graphene channel FET, plasma discharge power is reduced down to as low as 0.01W, giving rise to decrease significantly the plasma-induced damage on the graphene channel [3]. In addition, DLC thickness can be precisely controlled in an atomic scale and dielectric constant is also changed from low ${\kappa}$ for the passivation layer to high ${\kappa}$ for the gate insulator. On the other hand, negative electron affinity (NEA) of a hydrogen-terminated diamond surface is attractive and of practical importance for PAPECVD, because the diamond surface under PAPE-CVD with H2-diluted (about 1%) CH4 gas is exposed to a lot of hydrogen radicals and therefore can perform as a high-efficiency electron emitter due to NEA. In fact, we observed a large change of discharge current between with and without hydrogen termination. It is noted that photoelectrons are emitted from the SiO2 (350 nm)/Si interface with 7.2-eV UV light, making it possible to grow few-layer graphene on the thick SiO2 surface with no transition layer of amorphous carbon by means of PAPE-CVD without any metal catalyst.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.2
• /
• pp.223-230
• /
• 2011

An electrolytic oxidation process was applied to remove odorous compounds from non-point odor sources including wastewater pipelines and manholes. In this study, a distance between the anode and the cathode of the electrolytic process was varied as a system operating parameters, and its effects on odor removal efficiencies and reaction characteristics were investigated. Odor precursors such as sediment organic matters and reduced sulfur/nitrogen compounds were effectively oxidized in the electrolytic process, and a change in oxidation-reduction potential (ORP) indicated that an stringent anaerobic condition shifted to a mild anoxic condition rapidly. At an electrode distance of 1 cm and an applied voltage of 30 V, a system current was maintained at 1 A, and the current density was 23.1 $mA/cm^{2}$. Under the condition, the removal efficiency of hydrogen sulfide in gas phase was found to be 100%, and 93% of ammonium ion was removed from the liquid phase during the 120 minute operating period. Moreover, the sulfate ion (${SO_4}^{2-}$) concentration increased about three times from its initial value due to the active oxidation. As the specific power consumption (i.e., the energy input normalized by the effective volume) increased, the oxidation progressed rapidly, however, the oxidation rate was varied depending on target compounds. Consequently, a threshold power consumption for each odorous compound needs to be experimentally determined for an effective application of the electrolytic oxidation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.172-172
• /
• 2011

Anaerobic digestion(AD) has successfully been used for many applications that have conclusively demonstrated its ability to recycle biogenic wastes. AD has been successfully applied in industrial waste water treatment, stabilsation of sewage sludge, landfill management and recycling of biowaste and agricultural wastes as manure, energy crops. During AD, i.e. organic materials are decomposed by anaerobic forming bacteria and fina1ly converted to excellent fertilizer and biogas which is primarily composed of methane(CH4) and carbon dioxide(CO2) with smaller amounts of hydrogen sulfide(H2S) and ammonia(NH3), trace gases such as hydrogen(H2), nitrogen(N2), carbon monoxide(CO), oxygen(O2) and contain dust particles and siloxanes. The production and utilisation of biogas has several environmental advantages such as i)a renewable energy source, ii)reduction the release of methane to the atomsphere, iii)use as a substitute for fossil fuels. In utilisation of biogas, most of biogas produced from small scale plant e.g. farm-scale AD plant are used to provide as energy source for cooking and lighting, in most of the industrialised countries for energy recovery, environmental and safety reasons are used in combined heat and power(CHP) engines or as a supplement to natural. In particular, biogas to use as vehicle fuel or for grid injection there different biogas treatment steps are necessary, it is important to have a high energy content in biogas with biogas purification and upgrading. The energy content of biogas is in direct proportion to the methane content and by removing trace gases and carbon dioxide in the purification and upgrading process the energy content of biogas in increased. The process of purification and upgrading biogas generates new possibilities for its use since it can then replace natural gas, which is used extensively in many countries, However, those technologies add to the costs of biogas production. It is important to have an optimized purification and upgrading process in terms of low energy consumption and high efficiency giving high methane content in the upgraded gas. A number of technologies for purification and upgrading of biogas have been developed to use as a vehicle fuel or grid injection during the passed twenty years, and several technologies exist today and they are continually being improved. The biomethane which is produced from the purification and the upgrading process of biogas has gained increased attention due to rising oil and natural gas prices and increasing targets for renewable fuel quotes in many countries. New plants are continually being built and the number of biomethane plants was around 100 in 2009.

• Journal of the Korean Institute of Gas
• /
• v.21 no.5
• /
• pp.36-44
• /
• 2017

The small commercial fuel cell is a new energy system that produces electricity and heat through electrochemical reaction between air and hydrogen. In Korea, hundreds of domestic small commercial fuel cell systems have been installed and operated every years and many parts in fuel cell systems depend on overseas products. KOGAS(Korea Gas Corporation) has developed the fuel processor which is an important part of fuel cell system and has evaluated the long-term durability. And KOGAS has evaluated domestic and overseas NG blower and fuel processor connected to NG blower. The fuel processor developed by KOGAS have maintained an efficiency of 76% and constant performance over 3,000 hours. The NG blower developed in Korea showed similar characteristics as overseas NG blower in the evaluation of power consumption according to rear pressure and outside temperature. The fuel processor module, fuel processor connected to BOP showed excellent performance.