• 한국컴퓨터정보학회논문지
• /
• 제17권8호
• /
• pp.41-50
• /
• 2012

우리나라를 비롯한 선진국 국가의 대부분은 기존의 탄소 자동차 대용으로 전기 자동차, 메탄올 자동차, 수소 자동차 등 저탄소 자동차 개발에 막대한 투자를 계속하고 있다. 그러나, 궁극적이고 현실적인 무공해 교통수단은 자전거가 유일하기 때문에 각국의 중앙 정부 및 지방 정부들은 자전거 전용 도로를 개설하고 공공 임대 서비스 시스템 구축을 서두르고 있다. 현재 운영되고 있는 거의 모든 자전거 관제 시스템들은 자전거 보관소에서의 대여 및 반납과정의 자동화를 이루고 있으나, 보관소를 떠난 자전거의 이동 경로 및 소재를 모니터링하지는 않는다. 이 연구에서는 자전거 공공 임대 서비스를 위해 CDMA 모뎀과 결합된 GPS 단말기 및 이를 사용하는 위치기반 자전거 관제 시스템을 개발한다. 이 관제 시스템은 이동통신을 통하여 자전거에 부착된 GPS 관제 단말기로부터 위치 정보를 수신하고, 그 이동 경로를 GIS 연동 맵에 표시함으로써 자전거의 회수 및 재분배를 용이하게 하고, 도난 및 고의 파손을 최소화 시키며, 이용자들에게는 가까운 곳에 위치한 자전거 보관소를 추천해 줄 수 있다.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.161-167
• /
• 2009

The regulation of the $CO_2$ emit from vehicles have become much more stringent in recent years. This stringent regulation is more request vehicle manufacturers to develop the alternative fuel vehicles for reducing exhaust emissions. LPG fuel is more clean energy compares with gasoline and diesel fuel. Especially, $CO_2$ emission of LPG Vehicle is less than gasoline vehicle and almost equal to diesel vehicle. For this reason, recently korean government is extending LPG fuel for hybrid car and light duty vehicle. In domestic, Propane is mixing $15{\sim}30%$ to butane for improvement of cold start at winter season. Therefore, In this paper was investigated that the characteristics of emissions according to propane mixing rate with 0, 10, 20, 30% were compared and analyzed by the vehicle test using LPG vehicle according to the FTP75 mode. It was also investigated the characteristics of nano-particle emit with propane mixing rate.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.686-692
• /
• 2013

Today, environmental issues have become a matter of worldwide concern. In particular, automobile industries engage in considerable research and investment to develop high-efficiency and ecofriendly cars. Most ecofriendly cars use natural gas or hydrogen gas instead of fossil fuels. In this regard, low-weight and high-pressure vessels have gradually been developed to increase the driving distance of a car. However, most pressure vessels installed in cars develop many defects over time owing to shocks sustained when the car is being driven. Such defects can cause the explosion of the pressure vessel. Therefore it is important to prevent such explosions due to internal defects. The use of shearography for measuring the internal defects of objects afford many advantages. It is a non-contact and non-destructive method, and it is not limited by the object shape. In this study, the internal defect deformation and strain of an aluminum liner that is used in a CNG bus for the fuel storage tank is measured using shearography. It is important to measure the strain and deformation in order to detect defects and repair the pressure vessel. To verify the accuracy of the shearography measurement method, the measurement results of shearography, out-of-plane ESPI, and FEM are compared quantitatively.

• 천문학회보
• /
• 제36권2호
• /
• pp.152.1-152.1
• /
• 2011

We report preliminary results of long-slit near-infrared (NIR) spectroscopy of Luminous Blue Variables (LBVs) with moderate resolution of R ~ 2400. We obtained Jshort (1.04-1.26 micron) and Ks (2.02-2.31 micron) band spectra of 4 LBVs and 3 LBV candidates in Southern hemisphere using IRIS2, infrared imager and spectrograph, mounted on the 4-m Anglo-Australian Telescope. All targets are fairly bright in NIR so that we can obtain high signal-to-noise ratio for clear line detection and modeling. They are also widely distributed in the HR diagram so that we can compare the spectral properties of LBVs in different temperature and luminosity ranges. Among them, we present the results of two well-known LBVs AG Car and HR Car. Their spectra show similar properties with hydrogen, He I, and metallic lines such as Fe II and Mg II, most of them in emission. We discuss, in particular, the He I 1.083 micron lines formed in stellar wind because these two LBVs show large variation in their He I line intensities, compared to previous studies. Since the He I 1.083 line is known to be anticorrelated with the photometric variation of LBVs, strong line intensities with P-Cygni profiles in both stars indicate that they are now near the visual minimum phase. We model the obtained spectra using non-LTE atmosphere code CMFGEN of Hillier (1998) to derive stellar parameters such as wind velocity and mass loss rate, and discuss the long-term variability of stellar parameters of these LBVs. deduced from our otometric solution.

• 한국수소및신에너지학회논문집
• /
• 제26권6호
• /
• pp.629-637
• /
• 2015

As concern about energy security and global warming many countries have been making effort to reduce fossil fuel. In the case of US, as one of the efforts, the standards of the alcohol vehicle fuels(including blended with gasoline) have been established. Alcohol is known that make some trouble concerning startability, durability and corrosion when using as fuel of a conventional vehicle. For these reason, alcohol usage needs not only the fuel standard, but also a modified car. In the case of Korea, although there are no the standard and the modified vehicle yet, high concentration alcohol blended fuel has being sold at illegal market. In this study, exhaust gas and performance of the conventional vehicle that alcohol(methanol and isopropyl alcohol) blends were fueled were measured to notify danger of using them without preparation of institutional arrangements. Also, to analyze correlation characteristics of the fuels and them, property test of the fuels was conducted. The test result show that bad-startability caused by low RVP and high T10 affected increase in NMOG and CO. NOx was increased under the highest short term fuel trim caused by high Oxygen content and low NHV of alcohol. According to increasing as alcohol content, fuel economy and acceleration ability were decreased but $CO_2$ was not significantly decreased.

• 한국세라믹학회지
• /
• 제34권3호
• /
• pp.249-256
• /
• 1997

100-500KHz범위의 주파수전원을 인가하여 발생한 플라즈마를 이용하여 질화붕소(boron nitride)막의 합성시 육방정상(hexagonal phase)과 입방정상(cubic phase)의 생성거동을 관찰하였다. BCl3와 NH3를 붕소와 질소의 공급기체로 선택하였고 Ar과 수소를 carrier기체로 사용하였다. 합성변수로는 플라즈마전원의 전압, 기판의 bias, 합성압력, 기체의 조성, 기판의 온도이었는데, 합성된 박막은 FT-IR결과로부터 육방정과 입방정의 혼합상으로 나타났고, 각 상의 분률은 변수의 크기에 의존하였다. TEM분석결과 육방정으로만 구성된 박막은 비정질상으로 이루어졌으며, 입방정과 육방정의 혼합상의 경우는 비정질기지상에 수십 nanometer크기의 입방정입자가 분산된 구조를 하고 있었다.

• ETRI Journal
• /
• 제16권3호
• /
• pp.1-10
• /
• 1994

Undoped GaAs has been successfully grown by chemical beam epitaxy (CBE) via surface decomposition process using arsine $(AsH_3)$ and trimethylgallium (TMG). Three distinct regions of temperature-dependent growth rates were identified in the range of temperatures from 570 to $690^{\circ}C$. The growth rates were found strongly dependent on the V/III ratio between 5 and 30. The growth rate at low V/III ratio seems to be determined by arsenic produced on the surface, whereas at high V/III ratio it shows dependence on the adsorption of TMG. Hall measurement and photoluminescence (PL) analysis show that the films are all p-type and that carbon impurities are primarily responsible for the background doping. Carbon concentrations have been found to be reduced by two orders of magnitude as compared to those of epilayers grown by CBE which employs TMG and arsenic obtained from precracked $AsH_3$ in a high temperature cell. It was also found that hydrogen atoms dissociated from unprecracked $AsH_3$ play an important role in removing hydrocarbon-containing species resulting in a significant reduction of car-bon impurities.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.434-439
• /
• 2005

In order to prevent the global warming, Korea has had a ratification to the Kyoto Protocol which is specified the air pollution level should be lower the condition of the year 1990 until the year 2012, in hence the traffic system produced mostly the air pollution has been faced to big change. According to the reinforcement of higher level for environmental condition, alternative way to the conventional traffic system is required, so that is fuel cell technology of commercialized R&D program used by hydrogen fuel, and further for the optimized high energy efficiency it has been considered the advanced development of traffic system used the conventional railroad system. But it is moreover expected the huge amount of initial investment, so at the current, next new traffic system is needed. This study is for the improvement of urban traffic system in domestic which should be seriously changed for environmental friendly through the reduction of air pollution by fuel gases of vehicle and human convenience to be easily approached. In hence it is proposed the development of superior high efficiency-'Fuel-cell Rubber-tired Tram' system manufactured by the composite car-body.

• 소성∙가공
• /
• 제17권3호
• /
• pp.170-181
• /
• 2008

The shape of rectangular cup used for Ni-MH(Nickel-coated Metal Hydrogen) battery for hybrid car looks quite simple, but the forming process of extruding and setting up process design are highly difficult. Furthermore, there are few concrete reports on the rectangular deep drawn cup as part of hybrid vehicles till now. In this study, process design for rectangular cup in the multi-stage deep drawing process is carried out, and FE analysis is also preformed based on the result of the process design. From the simulation result, some unexpected problems such as earing, wrinkling and excessive thickness changes of the intermediate blank occurred. To overcome these failures, a series of modification for punch shape in the forming process design are completed and applied. Considering the modified punch shape in the multi-stage deep drawing process, additional FE analysis is also carried out and the simulation result is verified in view of the deformed shape, thickness change and effective strain distribution. The result of FE analysis with the improved process design confirmed not only reducing thinning of wall and possibilities of failure but also improving the quality of drawing product through the modification of punch shape.

• 한국정보전자통신기술학회논문지
• /
• 제13권6호
• /
• pp.556-561
• /
• 2020

현대 사회의 농업 인구의 고령화 및 감소로 농업 환경 개선이 필요한 실정이고 대표적인 문제 중 하나이다. 그리고 대부분의 작업체계에서 항상 운반 작업이 필요하기 때문에 운반 작업에 사용되는 시간과 노동력의 비율이 매우 높다. 이에 따라 많은 종류의 운반차들이 개발되고 판매되고 있으며, 초기에는 대부분 화석연료를 사용하는 동력운반차가 주종을 이루고 있다. 그러나 최근에는 지구온난화와 기후변화협약 등 국제 환경규제의 강화 및 화석연료의 고갈로 인한 수소, 연료전지, 태양광, 바이오 등 차세대 친환경에너지를 주목하고 있다. 그래서 본 연구에서는 화석연료를 대체하는 친환경적이며 누구나 쉽게 조작이 가능하고 안전한 농업용 전기운반차를 개발하는 것을 최종목표로 한다. 농업용 전기운반차의 광범위한 차속 조절 및 안정성 확보에 초점을 두고 설계하였으며, 성능 및 디자인을 고려하여 프레임, 주행부, 조향부, 컨트롤러 시스템 등으로 구성되어 각 부분별 검토하였다. 본 연구의 농업용 전기운반차가 젊은 인력이 부족한 농경사회에서 고령노동자나 여성들이 쉽고 편하게 작업을 할 수 있고 높은 효율성을 통해서 농경사회에 도움이 될 수 있을 것이다.