• Journal of the Mineralogical Society of Korea
• /
• v.27 no.2
• /
• pp.73-83
• /
• 2014

In order to investigate selective phase transformations and to determine the maximum Au leaching factors from microwave treated Au-bearing complex sulfides, a microscope, SEM-EDS analysis, and thiocyanate leaching tests were performed. When the Au-bearing complex sulfides were exposed to microwave heating, increasing the microwave exposure time increased temperature and decreased weight. Arsenopyrite was first selectively transformed to hematite, which formed a concentric rim structure. In this hematite, oxygen and carbon was detected and always showed high iron content and low arsenic content due to arcing and oxidation from microwave heating. The results of the leaching test using microwave treated sample showed that the maximum Au leaching parameters was reached with 0.5 g concentration thiocyanate, 2.0 M hydrochloric acid, 0.3 M copper sulfate and leaching temperature at$60^{\circ}C$. Under the maximum Au leaching conditions, 59% to 96.69% of Au was leached from the microwave treated samples, whereas only 24.53% to 92% of the Au was leached from the untreated samples.

• Journal of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.397-405
• /
• 1985

The adsorption behaviors of some oxime compounds well known as metal chelating agents on the Amberlite XAD resins were compared by measuring their distribution coefficients (log Kd) in various media, respectively. Among the oxime compounds, salicylaldoxime (SAO) and $\alpha-benzoinoxime(${\alpha}$-BzO)$ which showed large log Kd values were chosen. The characteristics of XAD-4 resins impregnated with SAO and ${\alpha}$-BzO have been studied to apply them for the adsorption and recovery of minute quantities of metal ions in aqueous solution. The optimum conditions for adsorption of SAO and ${\alpha}$-BzO on the resin were 30% methanol media having pH range of 1~8(for SAO) and 1~9 (for ${\alpha}$-BzO), respectively. The distribution coefficients of two oxime compounds were decreased as temperature increased. From the adsorption enthalpy data of SAO and ${\alpha}$-BzO, ranging from 4.96 to 6.66 Kcal/mol, it is suggested that their adsorption mechanism on XAD-4 resin is likely due to molecular adsorption equivalent to dipole-dipole interaction. The impregnated resins were considerably stable in the aqueous solutions of pH 5.0~10.0 and in 0.1~5M hydrochloric acid solutions. The former is the medium for adsorption of metal ions, while the latter is for recovery of the adsorbed metal ions. The adsorption mole ratio of Mn(II), Co(II), Ni(II), Zn(II) ions on SAO-XAD-4 and ${\alpha}$-BzO-XAD-4 resins were about 1 : 2 at the optimum conditions, respectively. The adsorbed metal ions were recovered completely by eluting with 3M HCl-50% methanol solution

• Journal of the Korean Chemical Society
• /
• v.53 no.1
• /
• pp.51-61
• /
• 2009

The purposes of this study are to analyze the learning contents on the measurement of reaction rate which is introduced in the high school ‘science’ and ‘chemistry II’ textbooks, and to revise the experiment appropriate to the learning contents. We examined 11 kinds of ‘science’ textbooks, 8 kinds of ‘chemistry II’ textbooks and 11 kinds of teacher’s manuals used in Korea and additionally surveyed teachers’ opinions on this subject. Most of textbook and teacher’s manuals described that ‘the reaction rate generally decreases through the time’, teachers’ conception also agreed with it. But most of experimental activities in the textbooks were inadequate to explain the concept that the reaction rate generally decreases with time. We analyzed the reasons and revised the experimental condition to solve this disagreement between the description in textbooks and an experimental result. Then we compared improved experimental result and theoretical prediction data. The improved experiment in this study is expected to help to describe the conception of chemical reaction rate in the textbook more clearly.

• Applied Biological Chemistry
• /
• v.40 no.1
• /
• pp.43-47
• /
• 1997

The weight ratio of the seed in jujube averaged to 19.1%. The chemical components of dried pitted-jujube were moisture 20.4%, protein 5.3%, fat 1.3%, ash 2.7%, fiber 4.4% and nitrogen-free extract 65.9%. Alcohol insoluble solid content of dried pitted-jujube was 17.4%, in which ammonium oxalate-soluble pectin was 3.7%, water-soluble pectin 3.0%, hydrochloric acid-soluble pectin 1.0%, and sodium hydroxide-soluble pectin 1.0%. Jujube contained sucrose, glucose and fructose as free sugar. The sugars of dried pitted-jujube was composed of sucrose 48.1%, fructose 18.7%, and glucose 11.3%. Drying experiments of pitted-jujube and unpitted-jujube were carried out. Moisture content and brix of dried pitted-jujube were reached at that of dried unpitted-jujube(11%, 78 brix in 48 hours of dry) in 11 hours of drying. And this means that dried pitted-jujube dried 4 times faster than dried unpitted-jujube. The extracts of dried pitted-jujube and dried unpitted-jujube were examinet according to the amount of water added and the extraction time. The brix of dried pitted-jujube extract for 30 min is similar to that of dried unpitted-jujube extract for 150 min. The brix of the extracts did not increase after 150 min extraction. As to the color of extract, 'L' value was higher in dried unpitted-be, while 'a' and 'b' values were higher in dried pitted-jujube.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.412-421
• /
• 2010

As a most conservative, minimally invasive trial against early caries lesions, resin infiltration concept has been introduced and studied mainly about effective materials and pre-treatment methods of surface layers to arrest the lesion effectively, which is still going on. This study was performed with an aim of evaluating the efficacy of arresting the caries process in the natural incipient lesions in spite of removing the surface layers and we obtained the results as follows: 1. It was revealed that infiltration groups(1, 3, 5) showed lower radio-density decline between pre- and posttreatment than control groups(2, 4, 6)(p<0.05). 2. Group 5, in which the surface layer was removed with hydrochloric acid, showed the most significant anticariogenic effect(p<0.05). 3. Under SEM evaluation after infiltration, group 1 and 3 showed more irregular destruction and intensive loss of surface layers than group 5. In conclusion, it was thought resin infiltration can be an effective tool against the early caries lesions although surface layers are removed.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.381-385
• /
• 2009

A basic objective is the preparation and surface studies of supported molten salt catalysts because molten salts can stay as the liquid phase in the range of the ordinary reaction temperature. Many kinds of metal salt mixtures for the formation of molten salt phase are appliable but CuCl and KCl were selected in this study because Cu is considered catalytically reactive in many reactons. The loading of the molten salt was selected as 25 vol% of the total pore volume of ${\gamma}-alumina$ to provide reasonable exposed surface area. The surface structure of catalysts containing molten salts in the ${\gamma}-alumina$ was studied using scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). CuCl and KCl were added into the ${\gamma}-alumina$ using concentrated hydrochloric acid solution by the impregnation technique. The surfaces of the prepared catalysts before and after heat treatments were compared and they suggested that the heat treatment of catalysts helped the formation of molten-salt although the surface compositions of CuCl and KCl were not uniform.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.2
• /
• pp.147-155
• /
• 2004

Freeze dried antler, heat dried antler, antler were extracted through processing step by water, protease and hydrochloric acid(HCl). Extraction rate of freeze dried antler at 50$^{\circ}C$ by water was 9.01％(8.82, absorbance at 280 nm), that of heat dried antler was 9.01％(4.45, absorbance at 280 nm), and that of antler was 1.10％(0.31, absorbance at 280 nm), respectively. Extraction rate of freeze dried antler by bacterial protease was 16.89％(4.50, absorbance at 280 nm), and that of heat dried antler was 17.29％(5.62, absorbance at 280 nm), and that of antler was 18.22％(0.64, absorbance at 280 nm), respectively. Extraction rate of freeze dried antler by 0.8N HCl was 72.25％(4.60, absorbance at 280 nm), that of heat dried antler was 71.14％(4.70 absorbance at 280 nm), and that of antler was 79.82％ (2.80, absorbance at 280 nm), respectively. Extraction rate of freeze dried antler through three processing steps was 98.15％, that of heat dried antler was 97.35％, that of antler was 99.14％, respectively. The result of analysis by HPLC shows that high molecular pe which appears in young antler and antler extraction was changed into a small molecular peak of about 1,000 by the reaction of protease, and protein of about MW 70,000 was extracted from their remaining residue by 0.8N HCl. The above result shows that water extraction and protease extraction in the freeze dried young antler, protease extraction and HCl extraction in dried young antler, and HCl extraction in antler are most effective.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.9-18
• /
• 2013

In order to optimize the gold leaching process from refractory sulfide concentrate, a chlorine-hypochlorite solution with varying concentrations and temperatures were applied to salt-roasted concentrate. The concentrate consisted of pyrite, chalcopyrite, and galena, which were turned into hematite through air-roasting at $750^{\circ}C$. Also these concentrates were changed into hematite and nantokite (CuCl)) through salt (NaCl)-roasting at $750^{\circ}C$. The results of the gold leaching experiments showed that the best gold leaching parameters were obtained when the hydrochloric acid-sodium hypochlorite mix was at a ratio of 1 : 2, the added concentration was 1.0 M concentration, the pulp density was 1.0%, and the leaching was done at a $60^{\circ}C$ leaching temperature. The leaching rate for gold was much greater in the roasted concentrate than in the raw concentrate. The leaching rate was greater in the salt-roasted concentrate than in the plain roasted concentrate too. From XRD analysis, quartz was found in the salt-roasted concentrate and in the solid residue from the chlorine-hypochlorite leaching solution at $60^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.445-449
• /
• 2012

We investigate the effects of redox reaction on preparation of high purity ${\alpha}$-alumina from selectively ground aluminum dross. Preparation procedure of the ${\alpha}$-alumina from the aluminum dross has four steps: i) selective crushing and grinding, ii) leaching process, iii) redox reaction, and iv) precipitation reaction under controlled pH. Aluminum dross supplied from a smelter was ground to separate metallic aluminum. After the separation, the recovered particles were treated with hydrochloric acid(HCl) to leach aluminum as aluminum chloride solution. Then, the aluminum chloride solution was applied to a redox reaction with hydrogen peroxide($H_2O_2$). The pH value of the solution was controlled by addition of ammonia to obtain aluminum hydroxide and to remove other impurities. Then, the obtained aluminum hydroxide was dried at $60^{\circ}C$ and heat-treated at $1300^{\circ}C$ to form ${\alpha}$-alumina. Aluminum dross was found to contain a complex mixture of aluminum metal, aluminum oxide, aluminum nitride, and spinel compounds. Regardless of introduction of the redox reaction, both of the sintered products are composed mainly of ${\alpha}$-alumina. There were fewer impurities in the solution subject to the redox reaction than there were in the solution that was not subject to the redox reaction. The impurities were precipitated by pH control with ammonia solution, and then removed. We can obtain aluminum hydroxide with high purity through control of pH after the redox reaction. Thus, pH control brings a synthesis of ${\alpha}$-alumina with fewer impurities after the redox reaction. Consequently, high purity ${\alpha}$-alumina from aluminum dross can be fabricated through the process by redox reaction.

• Korean Journal of Materials Research
• /
• v.21 no.5
• /
• pp.243-249
• /
• 2011

To reduce manufacturing costs of crystalline silicon solar cells, silicon wafers have become thinner. In relation to this, the properties of the aluminium-back surface field (Al-BSF) are considered an important factor in solar cell performance. Generally, screen-printing and a rapid thermal process (RTP) are utilized together to form the Al-BSF. This study evaluates Al-BSF formation on a (111) textured back surface compared with a (100) flat back surface with variation of ramp up rates from 18 to $89^{\circ}C$/s for the RTP annealing conditions. To make different back surface morphologies, one side texturing using a silicon nitride film and double side texturing were carried out. After aluminium screen-printing, Al-BSF formed according to the RTP annealing conditions. A metal etching process in hydrochloric acid solution was carried out to assess the quality of Al-BSF. Saturation currents were calculated by using quasi-steady-state photoconductance. The surface morphologies observed by scanning electron microscopy and a non-contacting optical profiler. Also, sheet resistances and bulk carrier concentration were measured by a 4-point probe and hall measurement system. From the results, a faster ramp up during Al-BSF formation yielded better quality than a slower ramp up process due to temperature uniformity of silicon and the aluminium surface. Also, in the Al-BSF formation process, the (111) textured back surface is significantly affected by the ramp up rates compared with the (100) flat back surface.